Linux USB Users
[Prev Page][Next Page]
- Re: Amoi WP-S1 Skyphone
- From: Fabio Venturi <dalamenona@xxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- Re: [ANN] HID report descriptor library and tool
- From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
- Re: [ANN] HID report descriptor library and tool
- From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
- [PATCH RFC 7/7] xHCI: re-initialize cmd_completion
- From: Libin Yang <libin.yang@xxxxxxx>
- [PATCH RFC 6/7] xHCI: isoc bandwidth
- From: Libin Yang <libin.yang@xxxxxxx>
- [PATCH RFC 5/7] xHCI: isoc interrupt and error handling
- From: Libin Yang <libin.yang@xxxxxxx>
- [PATCH RFC 4/7] xHCI td_cnt supporting multi-TD
- From: Libin Yang <libin.yang@xxxxxxx>
- Re: [PATCH RFC 1/7] xHCI: Introduce urb_priv structure
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH RFC 3/7] xHCI: update isoc URB interval and start_frame
- From: Libin Yang <libin.yang@xxxxxxx>
- [PATCH RFC 2/7] xHCI: Isoc transfer URB enqueue
- From: Libin <libin.yang@xxxxxxx>
- [PATCH RFC 1/7] xHCI: Introduce urb_priv structure
- From: Libin Yang <libin.yang@xxxxxxx>
- Re: [ANN] HID report descriptor library and tool
- From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
- Re: Was: Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking, Now: SWIOTLB dynamic allocation
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- Re: Was: Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking, Now: SWIOTLB dynamic allocation
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [ANN] HID report descriptor library and tool
- From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
- Re: [RFC PATCH v2 8/9] USB: add HCD_NO_COHERENT_MEM host controller driver flag
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- Re: Was: Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking, Now: SWIOTLB dynamic allocation
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- Re: [RFC PATCH v2 8/9] USB: add HCD_NO_COHERENT_MEM host controller driver flag
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB disks with spindown linux kernel problems
- From: Toerless Eckert <Toerless.Eckert@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 8/9] USB: add HCD_NO_COHERENT_MEM host controller driver flag
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- Re: [RFC PATCH v2 8/9] USB: add HCD_NO_COHERENT_MEM host controller driver flag
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [ANN] HID report descriptor library and tool
- From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
- Re: [PATCH] USB: EHCI: fix ITD list order
- From: Colin Fletcher <colin.m.fletcher@xxxxxxxxxxxxxx>
- [PATCH 2.6.34] USB: Fix s3c-hsotg build following Samsung platform header moves
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 8/9] USB: add HCD_NO_COHERENT_MEM host controller driver flag
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- Re: [ANN] HID report descriptor library and tool
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB: EHCI: adjust ehci_iso_stream for changes in ehci_qh
- From: Colin Fletcher <colin.m.fletcher@xxxxxxxxxxxxxx>
- Was: Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking, Now: SWIOTLB dynamic allocation
- From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
- Re: [PATCH] USB: EHCI: adjust ehci_iso_stream for changes in ehci_qh
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: EHCI: adjust ehci_iso_stream for changes in ehci_qh
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- Re: 2.6.33: Intel DP55KG - USB still not fixed: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -110
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] USB: MUSB: Enable MUSB for OMAP4 in Kconfig
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH] USB: EHCI: adjust ehci_iso_stream for changes in ehci_qh
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 8/9] USB: add HCD_NO_COHERENT_MEM host controller driver flag
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- usbserial usage
- From: Dave Milter <davemilter@xxxxxxxxx>
- 2.6.33: Intel DP55KG - USB still not fixed: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -110
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
- Re: [Bugme-new] [Bug 15376] New: regression (oops) with usb in 2.6.33-rc8
- From: Christophe Fergeau <cfergeau@xxxxxxxxxxxx>
- [PATCH] USB: EHCI: adjust ehci_iso_stream for changes in ehci_qh
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- [PATCH] USB: EHCI: fix ITD list order
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- RE: [PATCH 2/4] USB: MUSB: Enable MUSB for OMAP4 in Kconfig
- From: "Maulik" <x0082077@xxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Huawei BM325 zerocd issues
- From: Alexander Gordeev <lasaine@xxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Pavel Machek <pavel@xxxxxx>
- Re: Your SL11R-IDE unusual_devs entry
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Re: Your SL11R-IDE unusual_devs entry
- From: Phil Dibowitz <phil@xxxxxxxx>
- Re: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd
- From: Pozsar Balazs <pozsy@xxxxxxxxxxx>
- Your SL11R-IDE unusual_devs entry
- From: Phil Dibowitz <phil@xxxxxxxx>
- Re: [RFC PATCH v2 4/9] add generic dmabounce support
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- Re: Amoi WP-S1 Skyphone
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB disks with spindown linux kernel problems
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 4/9] add generic dmabounce support
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [RFC PATCH v2 7/9] wii: add mem2 dma mapping ops
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- [RFC PATCH v2 9/9] wii: hollywood ehci controller support
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- [RFC PATCH v2 8/9] USB: add HCD_NO_COHERENT_MEM host controller driver flag
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- [RFC PATCH v2 6/9] powerpc: add optional per-device dmabounce support
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- [RFC PATCH v2 5/9] arm: use generic dmabounce support
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- [RFC PATCH v2 4/9] add generic dmabounce support
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- [RFC PATCH v2 2/9] wii: have generic dma coherent
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- [RFC PATCH v2 3/9] dma-coherent: fix bitmap access races
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- [RFC PATCH v2 1/9] powerpc: add per-device dma coherent support
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- [RFC PATCH v2 0/9] wii: add usb 2.0 support
- From: Albert Herranz <albert_herranz@xxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: Amoi WP-S1 Skyphone
- From: Fabio Venturi <dalamenona@xxxxxxxxx>
- Re: USB OTG Gadget Failure with musb_hdrc driver on OMAP3 IGEPv2
- From: Eric Swenson <eric@xxxxxxxxxxx>
- RE: USB OTG Gadget Failure with musb_hdrc driver on OMAP3 IGEPv2
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: USB disks with spindown linux kernel problems
- From: Toerless Eckert <Toerless.Eckert@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Amoi WP-S1 Skyphone
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB disks with spindown linux kernel problems
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Amoi WP-S1 Skyphone
- From: Fabio Venturi <dalamenona@xxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- USB OTG Gadget Failure with musb_hdrc driver on OMAP3 IGEPv2
- From: Eric Swenson <eric@xxxxxxxxxxx>
- Re: [PATCH 1/5] tty: Add a function to insert a string of characters with the same flag
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Phil Dibowitz <phil@xxxxxxxx>
- USB disks with spindown linux kernel problems
- From: Toerless Eckert <Toerless.Eckert@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- [PATCH] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] [PATCH] [resend] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Matthew Dharm <mdharm-kernel@xxxxxxxxxxxxxxxxxx>
- [PATCH 7/7] usb: cdc-wdm: Fix deadlock between write and resume
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH 6/7] usb: cdc-wdm: Fix order in disconnect and fix locking
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH 5/7] usb: cdc-wdm:Fix loss of data due to autosuspend
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH 4/7] usb: cdc-wdm: Fix submission of URB after suspension
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH 3/7] usb: cdc-wdm:Fix race between disconnect and debug messages
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH 2/7] usb: cdc-wdm:Fix race between autosuspend and reading from the device
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH 1/7] usb: cdc-wdm: Fix race between write and disconnect
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH 0/7]fixes for cdc-wdm
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 1/5] tty: Add a function to insert a string of characters with the same flag
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] [resend] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Phil Dibowitz <phil@xxxxxxxx>
- Re: [usb-storage] [PATCH] [resend] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Phil Dibowitz <phil@xxxxxxxx>
- Re: [PATCH 1/5] tty: Add a function to insert a string of characters with the same flag
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2] USB: serial: use port endpoint size to determine if ep is available
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH resend] MUSB: fix DaVinci glue layer dependency
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH v2] USB: serial: use port endpoint size to determine if ep is available
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: [PATCH] USB: serial: fix error message on close in generic driver
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: [PATCH 1/5] tty: Add a function to insert a string of characters with the same flag
- From: Christopher Curtis <ccurtis0@xxxxxxxxx>
- Re: [PATCH] USB: serial: fix error message on close in generic driver
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH] USB: serial: use port endpoint size to determine if ep is available
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH] USB: serial: fix softint not being called on errors
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH] USB: serial: fix error message on close in generic driver
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Pekka Enberg <penberg@xxxxxxxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Pekka Enberg <penberg@xxxxxxxxxxxxxx>
- [ANN] HID report descriptor library and tool
- From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Ákos Maróy <akos@xxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Ákos Maróy <akos@xxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Greg KH <greg@xxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Greg KH <greg@xxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Greg KH <greg@xxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Markus Rechberger <mrechberger@xxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: 2.6.33 bugs (USBFS, Intel graphic)
- From: Greg KH <greg@xxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- Re: [PATCH 0/0] option: updates and additions for QCDM-capable device ports
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 0/0] option: updates and additions for QCDM-capable device ports
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [PATCH 1/2] USB: usbserial: mos7720: support for parallel port on moschip 7715
- From: Greg KH <greg@xxxxxxxxx>
- patch usb-remove-references-to-port-port.count-from-the-serial-drivers.patch added to gregkh-2.6 tree
- Re: [PATCH 01/07]usb: cdc-wdm: Fix race between write and disconnect
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 1/5] tty: Add a function to insert a string of characters with the same flag
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 0/0] option: updates and additions for QCDM-capable device ports
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH v2 1/3] usb serial: Add generic USB wwan support
- From: Greg KH <greg@xxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] USB: MUSB: Enable MUSB for OMAP4 in Kconfig
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [Bugme-new] [Bug 15253] New: USB audio headset crashes entire USB subsystem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: How to detect overcurrent event from userland
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: Franklin U301 3G/4G modem device dies (cdc-acm)
- From: Forest Bond <forest@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
- Re: Franklin U301 3G/4G modem device dies (cdc-acm)
- From: Forest Bond <forest@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- RE: [PATCH] musb: Add workqueue for URB giveback
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- [PATCH] backlight, appledisplay: fix incomplete registration failure handling
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- RE: [PATCH] musb: Add workqueue for URB giveback
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- Re: [PATCH] musb: Add workqueue for URB giveback
- From: David Vrabel <david.vrabel@xxxxxxx>
- Re: [PATCH] musb: Add workqueue for URB giveback
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH] musb: Add workqueue for URB giveback
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- RE: [PATCH] musb: Add workqueue for URB giveback
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- Re: [PATCH] musb: Add workqueue for URB giveback
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH] musb: Add workqueue for URB giveback
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- Re: How to detect overcurrent event from userland
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: How to detect overcurrent event from userland
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: How to detect overcurrent event from userland
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: where I can get usb microphone driver
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- RE: [PATCH 3/4] USB: MUSB: Add OMAP4 support in MUSB driver
- From: "Maulik" <x0082077@xxxxxx>
- RE: [PATCH 2/4] USB: MUSB: Enable MUSB for OMAP4 in Kconfig
- From: "Maulik" <x0082077@xxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- RE: [RFC] musb: Add workqueue for request giveback
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- Re: where I can get usb microphone driver
- From: loody <miloody@xxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Edward Shao <laface.tw@xxxxxxxxx>
- Re: where I can get usb microphone driver
- From: Greg KH <greg@xxxxxxxxx>
- RE: [RFC] musb: Add workqueue for request giveback
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- where I can get usb microphone driver
- From: loody <miloody@xxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: [Bugme-new] [Bug 15376] New: regression (oops) with usb in 2.6.33-rc8
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB: fix the idProduct value for USB-3.0 root hubs
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] USB: MUSB: Enable MUSB for OMAP4 in Kconfig
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Ákos Maróy <akos@xxxxxxxx>
- Re: [Bugme-new] [Bug 15253] New: USB audio headset crashes entire USB subsystem
- From: Winslow Dalpe <rwdalpe@xxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Unlinking URBs before suspending USB
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [Bugme-new] [Bug 15253] New: USB audio headset crashes entire USB subsystem
- From: Winslow Dalpe <rwdalpe@xxxxxxxxx>
- [PATCH] sisusbvga: Remove the BKL from ioctl
- From: Alessio Igor Bogani <abogani@xxxxxxxxxx>
- [PATCH 8/8] echi-dbgp: Add kernel debugger support for the usb debug port
- From: Jason Wessel <jason.wessel@xxxxxxxxxxxxx>
- [PATCH 7/8] ehci-dbgp: split PID register updates for IN and OUT pipes
- From: Jason Wessel <jason.wessel@xxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Ákos Maróy <akos@xxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: Unlinking URBs before suspending USB
- From: FEI YANG <afy095@xxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH] USB: pl2303: remove unnecessary reset of usb_device in urbs
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: [PATCH] USB: fix the idProduct value for USB-3.0 root hubs
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: fix the idProduct value for USB-3.0 root hubs
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH] USB: ftdi_sio: remove obsolete check in unthrottle
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH] USB: ftdi_sio: remove unused tx_bytes counter
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: [PATCH] [resend] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Phil Dibowitz <phil@xxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] USB: MUSB: Enable MUSB for OMAP4 in Kconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] qcaux: driver for auxiliary serial ports on Qualcomm devices
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: fix the idProduct value for USB-3.0 root hubs
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: "Rick L. Vinyard, Jr." <rvinyard@xxxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Ákos Maróy <akos@xxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: [Bugme-new] [Bug 15376] New: regression (oops) with usb in 2.6.33-rc8
- From: Christophe Fergeau <cfergeau@xxxxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Ákos Maróy <akos@xxxxxxxx>
- Re: [RFC] musb: Add workqueue for request giveback
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Greg KH <greg@xxxxxxxxx>
- Re: How to detect overcurrent event from userland
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB Flash Drive disconnected just before scanning.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Unlinking URBs before suspending USB
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC] musb: Add workqueue for request giveback
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [Bugme-new] [Bug 15376] New: regression (oops) with usb in 2.6.33-rc8
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [Bugme-new] [Bug 15376] New: regression (oops) with usb in 2.6.33-rc8
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: "Rick L. Vinyard, Jr." <rvinyard@xxxxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Ramya Desai <ramya.desai@xxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Ramya Desai <ramya.desai@xxxxxxxxx>
- Re: failure of usbmon in rc8 (was:Re: Sensebuffer from resumed storage device)
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 1/2] USB: usbserial: mos7720: support for parallel port on moschip 7715
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH 3/4] USB: MUSB: Add OMAP4 support in MUSB driver
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [Bugme-new] [Bug 15376] New: regression (oops) with usb in 2.6.33-rc8
- From: Christophe Fergeau <cfergeau@xxxxxxxxxxxx>
- Re: [PATCH 2/3] hid: add suspend/resume hooks for hid drivers
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: How to detect overcurrent event from userland
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [RFC] musb: Add workqueue for request giveback
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- USB Flash Drive disconnected just before scanning.
- From: Panard <panard@xxxxxxxxxxx>
- Re: [PATCH 1/8] PM: Add parent information to timing messages
- From: Pavel Machek <pavel@xxxxxx>
- [PATCH 4/4] OMAP: MUSB: Enable Mentor USB options in 4430 defconfig
- From: Maulik Mankad <x0082077@xxxxxx>
- [PATCH 3/4] USB: MUSB: Add OMAP4 support in MUSB driver
- From: Maulik Mankad <x0082077@xxxxxx>
- [PATCH 2/4] USB: MUSB: Enable MUSB for OMAP4 in Kconfig
- From: Maulik Mankad <x0082077@xxxxxx>
- [PATCH 1/4] USB: MUSB: Set transceiver interface type
- From: Maulik Mankad <x0082077@xxxxxx>
- [PATCH 0/4] USB MUSB patches for OMAP4
- From: Maulik Mankad <x0082077@xxxxxx>
- RE: [RFC] musb: Add workqueue for request giveback
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- Re: Unlinking URBs before suspending USB
- From: FEI YANG <afy095@xxxxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [PATCH 2/3] hid: add suspend/resume hooks for hid drivers
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Tejun Heo <tj@xxxxxxxxxx>
- RE: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Yuhong Bao <yuhongbao_386@xxxxxxxxxxx>
- Re: [RFC] musb: Add workqueue for request giveback
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Tejun Heo <tj@xxxxxxxxxx>
- RE: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Yuhong Bao <yuhongbao_386@xxxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: [Bugme-new] [Bug 15376] New: regression (oops) with usb in 2.6.33-rc8
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [usb-storage] [PATCH] [resend] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Matthew Dharm <mdharm-kernel@xxxxxxxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Ákos Maróy <akos@xxxxxxxx>
- Re: [Bugme-new] [Bug 15376] New: regression (oops) with usb in 2.6.33-rc8
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [Bugme-new] [Bug 15376] New: regression (oops) with usb in 2.6.33-rc8
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: "Rick L. Vinyard, Jr." <rvinyard@xxxxxxxxxxx>
- Re: [usb-storage] [PATCH] [resend] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: failure of usbmon in rc8 (was:Re: Sensebuffer from resumed storage device)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] [PATCH] [resend] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Matthew Dharm <mdharm-kernel@xxxxxxxxxxxxxxxxxx>
- Re: failure of usbmon in rc8 (was:Re: Sensebuffer from resumed storage device)
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: Kernel hang with USB storage driver?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: failure of usbmon in rc8 (was:Re: Sensebuffer from resumed storage device)
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: failure of usbmon in rc8 (was:Re: Sensebuffer from resumed storage device)
- From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
- Re: Franklin U301 3G/4G modem device dies (cdc-acm)
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: Franklin U301 3G/4G modem device dies (cdc-acm)
- From: Forest Bond <forest@xxxxxxxxxxxxxxxxxxx>
- Re: failure of usbmon in rc8 (was:Re: Sensebuffer from resumed storage device)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- failure of usbmon in rc8 (was:Re: Sensebuffer from resumed storage device)
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/3] hid: add suspend/resume hooks for hid drivers
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- [PATCH 3/3] hid-picolcd: make use of new suspend/resume hooks
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- [PATCH 1/3] picolcd: driver for PicoLCD HID device
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] backlight: fix missing/incomplete registration failure handling
- From: Anisse Astier <anisse@xxxxxxxxx>
- [RFC] musb: Add workqueue for request giveback
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 2/2] AM35x: musb: Workaround for fifo read issue
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 1/2] musb: add musb support for AM35x
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH] AM35x: Add musb support
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- Re: How to detect overcurrent event from userland
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Ramya Desai <ramya.desai@xxxxxxxxx>
- Re: How to detect overcurrent event from userland
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] MUSB: fix DaVinci glue layer
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH] MUSB: fix DaVinci glue layer
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH] [resend] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: usbmc seems broken
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] MUSB: fix DaVinci glue layer
- From: Greg KH <gregkh@xxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Bee Hock Goh <beehock@xxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- Re: [usb-storage] Sensebuffer from resumed storage device
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: Sensebuffer from resumed storage device
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: Sensebuffer from resumed storage device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- [PATCH 2/2] USB: usbserial: mos7720: cleanup and consistency, replace snd_mos_cmd
- From: Mike Dunn <mikedunn@xxxxxxxxxxx>
- [PATCH 1/2] USB: usbserial: mos7720: support for parallel port on moschip 7715
- From: Mike Dunn <mikedunn@xxxxxxxxxxx>
- [PATCH 0/2] USB: usbserial: mos7720: support for parallel port on moschip 7715
- From: Mike Dunn <mikedunn@xxxxxxxxxxx>
- Re: Events apparently not detected from USB bluetooth speaker
- From: Greg KH <greg@xxxxxxxxx>
- Re: [Bugme-new] [Bug 15320] New: repeated "reset high speed USB device" messages
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 10/11] omap: musb: get rid of dyn_fifo
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: NEC720101_2.6.22.9_memory_leak
- From: nogradi <nop@xxxxxxxx>
- Re: NEC720101_2.6.22.9_memory_leak
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Sensebuffer from resumed storage device
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: NEC720101_2.6.22.9_memory_leak
- From: nogradi <nop@xxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: How to detect overcurrent event from userland
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: How to detect overcurrent event from userland
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- RE: need to know about usbaudio.
- From: "Subbrathnam, Swaminathan" <swami.iyer@xxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Ramya Desai <ramya.desai@xxxxxxxxx>
- RE: [PATCH 10/11] omap: musb: get rid of dyn_fifo
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: Setting usb autosuspend idle-delay in milliseconds
- From: "Torgny Johansson" <torgny.johansson@xxxxxxxxxxxx>
- Re: How to detect overcurrent event from userland
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Events apparently not detected from USB bluetooth speaker
- From: Reuben Firmin <rf@xxxxxxxxxxx>
- Re: [PATCH 10/11] omap: musb: get rid of dyn_fifo
- From: Andreas Hartmetz <ahartmetz@xxxxxxxxx>
- Re: [PATCH 10/11] omap: musb: get rid of dyn_fifo
- From: Thomas Weber <weber@xxxxxxxxxxxxx>
- Re: MSI Vox II USB Stick - ID 6000:0001 not detected
- From: Bee Hock Goh <beehock@xxxxxxxxx>
- Re: MSI Vox II USB Stick - ID 6000:0001 not detected
- From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
- [patch] uwb: remove duplicate cpu_to_le16()
- From: Dan Carpenter <error27@xxxxxxxxx>
- Re: MSI Vox II USB Stick - ID 6000:0001 not detected
- From: Bee Hock Goh <beehock@xxxxxxxxx>
- Re: MSI Vox II USB Stick - ID 6000:0001 not detected
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: MSI Vox II USB Stick - ID 6000:0001 not detected
- From: Bee Hock Goh <beehock@xxxxxxxxx>
- How to detect overcurrent event from userland
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: MSI Vox II USB Stick - ID 6000:0001 not detected
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: MSI Vox II USB Stick - ID 6000:0001 not detected
- From: Bee Hock Goh <beehock@xxxxxxxxx>
- Re: MSI Vox II USB Stick - ID 6000:0001 not detected
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- MSI Vox II USB Stick - ID 6000:0001 not detected
- From: Bee Hock Goh <beehock@xxxxxxxxx>
- RE: [PATCH 10/11] omap: musb: get rid of dyn_fifo
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- Re: Setting usb autosuspend idle-delay in milliseconds
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- RE: Setting usb autosuspend idle-delay in milliseconds
- From: "Torgny Johansson" <torgny.johansson@xxxxxxxxxxxx>
- Re: need to know about usbaudio.
- From: Pratik Prajapati <pratik.prajapati@xxxxxxxxx>
- Re: [Bugme-new] [Bug 15360] New: Bluetooth dongle can't be put into UP state
- RE: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Yuhong Bao <yuhongbao_386@xxxxxxxxxxx>
- RE: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Yuhong Bao <yuhongbao_386@xxxxxxxxxxx>
- [RFC PATCH] fix problems with NETIF_F_HIGHDMA in networking drivers
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: [Bugme-new] [Bug 15360] New: Bluetooth dongle can't be put into UP state
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [Bugme-new] [Bug 15320] New: repeated "reset high speed USB device" messages
- From: Duoran Nurt <duoran.nurt@xxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2.6.31] rndis_host: extra interrupt for problematic devices
- From: Mark Ellis <mark@xxxxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: NEC720101_2.6.22.9_memory_leak
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: i1480: endian question
- From: Inaky Perez-Gonzalez <inaky.perez-gonzalez@xxxxxxxxx>
- Re: [PATCH 2/3] backlight: mark struct backlight_ops const
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] MUSB: fix DaVinci glue layer
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: NEC720101_2.6.22.9_memory_leak
- From: nogradi <nop@xxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: NEC720101_2.6.22.9_memory_leak
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] usb serial: Add generic USB wwan support
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] usb serial: Add generic USB wwan support
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [PATCH v3 3/3] qcserial: Use generic USB wwan code
- From: Matthew Garrett <mjg@xxxxxxxxxx>
- Re: Franklin U301 3G/4G modem device dies (cdc-acm)
- From: Forest Bond <forest@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 3/3] qcserial: Use generic USB wwan code
- From: Matthew Garrett <mjg@xxxxxxxxxx>
- [PATCH v2 2/3] option: Use generic USB wwan code
- From: Matthew Garrett <mjg@xxxxxxxxxx>
- [PATCH v2 1/3] usb serial: Add generic USB wwan support
- From: Matthew Garrett <mjg@xxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Ramya Desai <ramya.desai@xxxxxxxxx>
- RE: [PATCH 07/07]usb: cdc-wdm: fix deadlock between write and resume
- From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
- RE: [PATCH 06/07]usb: cdc-wdm: Fix order in disconnect and fix locking
- From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
- RE: [PATCH 05/07]usb: cdc-wdm:Fix loss of data due to autosuspend
- From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
- RE: [PATCH 04/07]usb: cdc-wdm: Fix submission of URB after suspension
- From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
- RE: [PATCH 03/07]usb: cdc-wdm:Fix race between disconnect and debug messages
- From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
- RE: [PATCH 02/07]usb: cdc-wdm:Fix race between autosuspend and reading from the device
- From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
- RE: [PATCH 01/07]usb: cdc-wdm: Fix race between write and disconnect
- From: Rickard Bellini <rickard.bellini@xxxxxxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: James Bottomley <James.Bottomley@xxxxxxx>
- Re: question about drivers/usb/wusbcore/crypto.c
- From: David Vrabel <david.vrabel@xxxxxxx>
- Re: [PATCH resubmit] USB: serial: ftdi: add CONTEC vendor and product id
- From: Andreas Mohr <andi@xxxxxxxx>
- Re: Maximum data size in a single transfer for MS driver
- From: Ramya Desai <ramya.desai@xxxxxxxxx>
- Re: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd
- From: Andrey Borzenkov <arvidjaar@xxxxxxx>
- question about drivers/usb/wusbcore/crypto.c
- From: Julia Lawall <julia@xxxxxxx>
- Re: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd
- From: Robby Workman <rw@xxxxxxxxxxxxx>
- Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd
- From: Andrey Borzenkov <arvidjaar@xxxxxxx>
- i1480: endian question
- From: Dan Carpenter <error27@xxxxxxxxx>
- [PATCH resubmit] USB: serial: ftdi: add CONTEC vendor and product id
- From: Daniel Sangorrin <daniel.sangorrin@xxxxxxxxx>
- Re: [Bugme-new] [Bug 15321] New: vfat usb device cannot be mounted on 2.6.32, works on 2.6.26
- From: Shai Berger <shai@xxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: NEC720101_2.6.22.9_memory_leak
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [Bugme-new] [Bug 15320] New: repeated "reset high speed USB device" messages
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [Bugme-new] [Bug 15321] New: vfat usb device cannot be mounted on 2.6.32, works on 2.6.26
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] unusual_devs.h: Fix capacity for SL11R-IDE 2.6c
- From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
- NEC720101_2.6.22.9_memory_leak
- From: nogradi <nop@xxxxxxxx>
- Re: USB IR receiver does not work after resume
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- USB IR receiver does not work after resume
- From: Justin Smith <justin@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] backlight: fix missing/incomplete registration failure handling
- From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
- [PATCH v2] USB: fix build on OMAPs if CONFIG_PM_RUNTIME is not set
- From: Anand Gadiyar <gadiyar@xxxxxx>
- [PATCH] USB: fix build on OMAPs if CONFIG_PM_RUNTIME is not set
- From: Anand Gadiyar <gadiyar@xxxxxx>
- Re: Huawei BM325 zerocd issues
- From: Alexander Gordeev <lasaine@xxxxxxxxxxxxx>
- Re: Huawei BM325 zerocd issues
- From: Josua Dietze <digidietze@xxxxxxxxxxxxxxx>
- Re: Huawei BM325 zerocd issues
- From: Alexander Gordeev <lasaine@xxxxxxxxxxxxx>
- Re: Huawei BM325 zerocd issues
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Huawei BM325 zerocd issues
- From: Alexander Gordeev <lasaine@xxxxxxxxxxxxx>
- [PATCH 2/3] backlight: mark struct backlight_ops const
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- [PATCH 3/3] backlight: fix missing/incomplete registration failure handling
- From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
- Huawei BM325 zerocd issues
- From: Alexander Gordeev <lasaine@xxxxxxxxxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- Re: [PATCH 1/3] usb serial: Add generic USB wwan support
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
- Re: [PATCH] USB: serial: ftdi: add CONTEC vendor and product id
- From: Andreas Mohr <andi@xxxxxxxx>
- Re: [PATCH 1/3] usb serial: Add generic USB wwan support
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: [REGRESSION] "USB: use kfifo to buffer usb-generic serial writes" causes gobi_loader to hang
- From: Anssi Hannula <anssi.hannula@xxxxxx>
- Re: [PATCH] USB: fix I2C API usage in ohci-pnx4008.
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- [PATCH] USB: serial: ftdi: add CONTEC vendor and product id
- From: Daniel Sangorrin <daniel.sangorrin@xxxxxxxxx>
- Re: some questions about UHCI and EHCI
- From: vichy <vichy.kuo@xxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- [Patch] usbmon: mask seconds properly in text API
- From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
- Re: need to know about usbaudio.
- From: Pratik Prajapati <pratik.prajapati@xxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support
- From: Robert Hancock <hancockrwd@xxxxxxxxx>
- [PATCH] usb: storage: onetouch: unnecessary GFP_ATOMIC
- From: Oliver Neukum <neukum@xxxxxxxxxxxxx>
- [PATCH] usb: sisusbvga: no unnecessary GFP_ATOMIC
- From: Oliver Neukum <neukum@xxxxxxxxxxxxx>
- Re: [PATCH 03/11] arm: omap: musb: ioremap only what's ours
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 03/11] arm: omap: musb: ioremap only what's ours
- From: "Aguirre, Sergio" <saaguirre@xxxxxx>
- Re: [PATCH 03/11] arm: omap: musb: ioremap only what's ours
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 03/11] arm: omap: musb: ioremap only what's ours
- From: "Aguirre, Sergio" <saaguirre@xxxxxx>
- [PATCH 05/11] omap: musb: remove unused data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 10/11] omap: musb: get rid of dyn_fifo
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 09/11] omap: musb: remove unnecessary return
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 08/11] omap: musb: remove unused dma data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 07/11] omap: musb: remove unused soft_con field
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 06/11] arm: omap: musb: we can use clk framework
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 03/11] arm: omap: musb: ioremap only what's ours
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] qcserial: Support gobi 2000 variants with 3 interfaces
- From: Matthew Garrett <mjg@xxxxxxxxxx>
- Re: Franklin U301 3G/4G modem device dies (cdc-acm)
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Franklin U301 3G/4G modem device dies (cdc-acm)
- From: Forest Bond <forest@xxxxxxxxxxxxxxxxxxx>
- Re: [Bugme-new] [Bug 15321] New: vfat usb device cannot be mounted on 2.6.32, works on 2.6.26
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: [Bugme-new] [Bug 15320] New: repeated "reset high speed USB device" messages
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- RE: need to know about usbaudio.
- From: "Subbrathnam, Swaminathan" <swami.iyer@xxxxxx>
- Re: need to know about usbaudio.
- From: Steve Calfee <stevecalfee@xxxxxxxxx>
- Re: Unlinking URBs before suspending USB
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: USB mass storage and ARM cache coherency
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: some questions about UHCI and EHCI
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Unlinking URBs before suspending USB
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: Unlinking URBs before suspending USB
- From: FEI YANG <afy095@xxxxxxxxxxxx>
- Re: Setting usb autosuspend idle-delay in milliseconds
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: some questions about UHCI and EHCI
- From: Greg KH <greg@xxxxxxxxx>
- Re: some questions about UHCI and EHCI
- From: vichy <vichy.kuo@xxxxxxxxx>
- Re: [Bugme-new] [Bug 15253] New: USB audio headset crashes entire USB subsystem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Question: USBserial suspend/resume issue
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Unlinking URBs before suspending USB
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Unlinking URBs before suspending USB
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: need to know about usbaudio.
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- Re: [Bugme-new] [Bug 15253] New: USB audio headset crashes entire USB subsystem
- From: Winslow Dalpe <rwdalpe@xxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]