On Thu, Feb 25, 2010 at 02:52:49PM -0500, Alan Stern wrote: > On Thu, 25 Feb 2010, Sarah Sharp wrote: > > > On Thu, Feb 25, 2010 at 01:19:37PM -0500, Alan Stern wrote: > > > This patch (as1346) changes the idProduct value for USB-3.0 root hubs > > > from 0x0002 (which we already use for USB-2.0 root hubs) to 0x0003. > > > > > > Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> > > > CC: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> > > > CC: <stable@xxxxxxxxxx> > > > > > > --- > > > > > > This probably was a copy & paste error originally. > > > > Not necessarily. I need to check if khubd will work correctly with this > > change. I was trying to do the minimal amount of modification needed to > > get the USB3 root hubs working, so the root hub descriptor for USB3 is > > very similar to a USB2 root hub descriptor. > > The hub driver matches based on the device or interface class, not the > product ID. Changing the product ID won't hurt it. > > With the existing code, lsusb calls an xHCI root hub a "Linux > Foundation 2.0 root hub", the same as an EHCI root hub. By contrast, > UHCI and OHCI are reported as "Linux Foundation 1.1 root hub". Yep, I checked, you're right. :) Acked-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
