[PATCH v2 2/3] option: Use generic USB wwan code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As this code was simply factored out of option, this is a simple
conversion.

Signed-off-by: Matthew Garrett <mjg@xxxxxxxxxx>
---
 drivers/usb/serial/Kconfig  |    1 +
 drivers/usb/serial/option.c |  648 ++-----------------------------------------
 2 files changed, 20 insertions(+), 629 deletions(-)

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index fce06ed..f1c7fa0 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -570,6 +570,7 @@ config USB_WWAN
 
 config USB_SERIAL_OPTION
 	tristate "USB driver for GSM and CDMA modems"
+	select USB_WWAN
 	help
 	  Say Y here if you have a GSM or CDMA modem that's connected to USB.
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6e94a67..afddb56 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -41,35 +41,14 @@
 #include <linux/bitops.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/usb/usb-wwan.h>
 
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
-static int  option_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void option_close(struct usb_serial_port *port);
-static void option_dtr_rts(struct usb_serial_port *port, int on);
-
-static int  option_startup(struct usb_serial *serial);
-static void option_disconnect(struct usb_serial *serial);
-static void option_release(struct usb_serial *serial);
-static int  option_write_room(struct tty_struct *tty);
-
+static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
 
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-static int  option_chars_in_buffer(struct tty_struct *tty);
-static void option_set_termios(struct tty_struct *tty,
-			struct usb_serial_port *port, struct ktermios *old);
-static int  option_tiocmget(struct tty_struct *tty, struct file *file);
-static int  option_tiocmset(struct tty_struct *tty, struct file *file,
-				unsigned int set, unsigned int clear);
-static int  option_send_setup(struct usb_serial_port *port);
-#ifdef CONFIG_PM
-static int  option_suspend(struct usb_serial *serial, pm_message_t message);
-static int  option_resume(struct usb_serial *serial);
-#endif
-
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
 #define OPTION_PRODUCT_COLT			0x5000
@@ -677,22 +656,22 @@ static struct usb_serial_driver option_1port_device = {
 	.id_table          = option_ids,
 	.num_ports         = 1,
 	.probe             = option_probe,
-	.open              = option_open,
-	.close             = option_close,
-	.dtr_rts	   = option_dtr_rts,
-	.write             = option_write,
-	.write_room        = option_write_room,
-	.chars_in_buffer   = option_chars_in_buffer,
-	.set_termios       = option_set_termios,
-	.tiocmget          = option_tiocmget,
-	.tiocmset          = option_tiocmset,
-	.attach            = option_startup,
-	.disconnect        = option_disconnect,
-	.release           = option_release,
+	.open              = usb_wwan_open,
+	.close             = usb_wwan_close,
+	.dtr_rts	   = usb_wwan_dtr_rts,
+	.write             = usb_wwan_write,
+	.write_room        = usb_wwan_write_room,
+	.chars_in_buffer   = usb_wwan_chars_in_buffer,
+	.set_termios       = usb_wwan_set_termios,
+	.tiocmget          = usb_wwan_tiocmget,
+	.tiocmset          = usb_wwan_tiocmset,
+	.attach            = usb_wwan_startup,
+	.disconnect        = usb_wwan_disconnect,
+	.release           = usb_wwan_release,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
-	.suspend           = option_suspend,
-	.resume            = option_resume,
+	.suspend           = usb_wwan_suspend,
+	.resume            = usb_wwan_resume,
 #endif
 };
 
@@ -705,12 +684,6 @@ static int debug;
 #define IN_BUFLEN 4096
 #define OUT_BUFLEN 4096
 
-struct option_intf_private {
-	spinlock_t susp_lock;
-	unsigned int suspended:1;
-	int in_flight;
-};
-
 struct option_port_private {
 	/* Input endpoints and buffer for this port */
 	struct urb *in_urbs[N_IN_URB];
@@ -767,209 +740,21 @@ module_exit(option_exit);
 static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
-	struct option_intf_private *data;
+	struct usb_wwan_intf_private *data;
 	/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
 	if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
 		serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
 		serial->interface->cur_altsetting->desc.bInterfaceClass == 0x8)
 		return -ENODEV;
 
-	data = serial->private = kzalloc(sizeof(struct option_intf_private), GFP_KERNEL);
+	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
+	data->send_setup = option_send_setup;
 	spin_lock_init(&data->susp_lock);
 	return 0;
 }
 
-static void option_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios)
-{
-	dbg("%s", __func__);
-	/* Doesn't support option setting */
-	tty_termios_copy_hw(tty->termios, old_termios);
-	option_send_setup(port);
-}
-
-static int option_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned int value;
-	struct option_port_private *portdata;
-
-	portdata = usb_get_serial_port_data(port);
-
-	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
-		((portdata->dtr_state) ? TIOCM_DTR : 0) |
-		((portdata->cts_state) ? TIOCM_CTS : 0) |
-		((portdata->dsr_state) ? TIOCM_DSR : 0) |
-		((portdata->dcd_state) ? TIOCM_CAR : 0) |
-		((portdata->ri_state) ? TIOCM_RNG : 0);
-
-	return value;
-}
-
-static int option_tiocmset(struct tty_struct *tty, struct file *file,
-			unsigned int set, unsigned int clear)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-
-	portdata = usb_get_serial_port_data(port);
-
-	/* FIXME: what locks portdata fields ? */
-	if (set & TIOCM_RTS)
-		portdata->rts_state = 1;
-	if (set & TIOCM_DTR)
-		portdata->dtr_state = 1;
-
-	if (clear & TIOCM_RTS)
-		portdata->rts_state = 0;
-	if (clear & TIOCM_DTR)
-		portdata->dtr_state = 0;
-	return option_send_setup(port);
-}
-
-/* Write */
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count)
-{
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	int i;
-	int left, todo;
-	struct urb *this_urb = NULL; /* spurious */
-	int err;
-	unsigned long flags;
-
-	portdata = usb_get_serial_port_data(port);
-	intfdata = port->serial->private;
-
-	dbg("%s: write (%d chars)", __func__, count);
-
-	i = 0;
-	left = count;
-	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
-		todo = left;
-		if (todo > OUT_BUFLEN)
-			todo = OUT_BUFLEN;
-
-		this_urb = portdata->out_urbs[i];
-		if (test_and_set_bit(i, &portdata->out_busy)) {
-			if (time_before(jiffies,
-					portdata->tx_start_time[i] + 10 * HZ))
-				continue;
-			usb_unlink_urb(this_urb);
-			continue;
-		}
-		dbg("%s: endpoint %d buf %d", __func__,
-			usb_pipeendpoint(this_urb->pipe), i);
-
-		err = usb_autopm_get_interface_async(port->serial->interface);
-		if (err < 0)
-			break;
-
-		/* send the data */
-		memcpy(this_urb->transfer_buffer, buf, todo);
-		this_urb->transfer_buffer_length = todo;
-
-		spin_lock_irqsave(&intfdata->susp_lock, flags);
-		if (intfdata->suspended) {
-			usb_anchor_urb(this_urb, &portdata->delayed);
-			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-		} else {
-			intfdata->in_flight++;
-			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-			err = usb_submit_urb(this_urb, GFP_ATOMIC);
-			if (err) {
-				dbg("usb_submit_urb %p (write bulk) failed "
-					"(%d)", this_urb, err);
-				clear_bit(i, &portdata->out_busy);
-				spin_lock_irqsave(&intfdata->susp_lock, flags);
-				intfdata->in_flight--;
-				spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-				continue;
-			}
-		}
-
-		portdata->tx_start_time[i] = jiffies;
-		buf += todo;
-		left -= todo;
-	}
-
-	count -= left;
-	dbg("%s: wrote (did %d)", __func__, count);
-	return count;
-}
-
-static void option_indat_callback(struct urb *urb)
-{
-	int err;
-	int endpoint;
-	struct usb_serial_port *port;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
-	int status = urb->status;
-
-	dbg("%s: %p", __func__, urb);
-
-	endpoint = usb_pipeendpoint(urb->pipe);
-	port =  urb->context;
-
-	if (status) {
-		dbg("%s: nonzero status: %d on endpoint %02x.",
-		    __func__, status, endpoint);
-	} else {
-		tty = tty_port_tty_get(&port->port);
-		if (urb->actual_length) {
-			tty_buffer_request_room(tty, urb->actual_length);
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-		} else 
-			dbg("%s: empty read urb received", __func__);
-		tty_kref_put(tty);
-
-		/* Resubmit urb so we continue receiving */
-		if (port->port.count && status != -ESHUTDOWN) {
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err)
-				printk(KERN_ERR "%s: resubmit read urb failed. "
-					"(%d)", __func__, err);
-			else
-				usb_mark_last_busy(port->serial->dev);
-		}
-
-	}
-	return;
-}
-
-static void option_outdat_callback(struct urb *urb)
-{
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	int i;
-
-	dbg("%s", __func__);
-
-	port =  urb->context;
-	intfdata = port->serial->private;
-
-	usb_serial_port_softint(port);
-	usb_autopm_put_interface_async(port->serial->interface);
-	portdata = usb_get_serial_port_data(port);
-	spin_lock(&intfdata->susp_lock);
-	intfdata->in_flight--;
-	spin_unlock(&intfdata->susp_lock);
-
-	for (i = 0; i < N_OUT_URB; ++i) {
-		if (portdata->out_urbs[i] == urb) {
-			smp_mb__before_clear_bit();
-			clear_bit(i, &portdata->out_busy);
-			break;
-		}
-	}
-}
-
 static void option_instat_callback(struct urb *urb)
 {
 	int err;
@@ -1026,183 +811,6 @@ static void option_instat_callback(struct urb *urb)
 	}
 }
 
-static int option_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-	int i;
-	int data_len = 0;
-	struct urb *this_urb;
-
-	portdata = usb_get_serial_port_data(port);
-
-	for (i = 0; i < N_OUT_URB; i++) {
-		this_urb = portdata->out_urbs[i];
-		if (this_urb && !test_bit(i, &portdata->out_busy))
-			data_len += OUT_BUFLEN;
-	}
-
-	dbg("%s: %d", __func__, data_len);
-	return data_len;
-}
-
-static int option_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-	int i;
-	int data_len = 0;
-	struct urb *this_urb;
-
-	portdata = usb_get_serial_port_data(port);
-
-	for (i = 0; i < N_OUT_URB; i++) {
-		this_urb = portdata->out_urbs[i];
-		/* FIXME: This locking is insufficient as this_urb may
-		   go unused during the test */
-		if (this_urb && test_bit(i, &portdata->out_busy))
-			data_len += this_urb->transfer_buffer_length;
-	}
-	dbg("%s: %d", __func__, data_len);
-	return data_len;
-}
-
-static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	struct usb_serial *serial = port->serial;
-	int i, err;
-	struct urb *urb;
-
-	portdata = usb_get_serial_port_data(port);
-	intfdata = serial->private;
-
-	dbg("%s", __func__);
-
-	/* Start reading from the IN endpoint */
-	for (i = 0; i < N_IN_URB; i++) {
-		urb = portdata->in_urbs[i];
-		if (!urb)
-			continue;
-		err = usb_submit_urb(urb, GFP_KERNEL);
-		if (err) {
-			dbg("%s: submit urb %d failed (%d) %d",
-				__func__, i, err,
-				urb->transfer_buffer_length);
-		}
-	}
-
-	option_send_setup(port);
-
-	serial->interface->needs_remote_wakeup = 1;
-	spin_lock_irq(&intfdata->susp_lock);
-	portdata->opened = 1;
-	spin_unlock_irq(&intfdata->susp_lock);
-	usb_autopm_put_interface(serial->interface);
-
-	return 0;
-}
-
-static void option_dtr_rts(struct usb_serial_port *port, int on)
-{
-	struct usb_serial *serial = port->serial;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-	portdata = usb_get_serial_port_data(port);
-	mutex_lock(&serial->disc_mutex);
-	portdata->rts_state = on;
-	portdata->dtr_state = on;
-	if (serial->dev)
-		option_send_setup(port);
-	mutex_unlock(&serial->disc_mutex);
-}
-
-
-static void option_close(struct usb_serial_port *port)
-{
-	int i;
-	struct usb_serial *serial = port->serial;
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata = port->serial->private;
-
-	dbg("%s", __func__);
-	portdata = usb_get_serial_port_data(port);
-
-	if (serial->dev) {
-		/* Stop reading/writing urbs */
-		spin_lock_irq(&intfdata->susp_lock);
-		portdata->opened = 0;
-		spin_unlock_irq(&intfdata->susp_lock);
-
-		for (i = 0; i < N_IN_URB; i++)
-			usb_kill_urb(portdata->in_urbs[i]);
-		for (i = 0; i < N_OUT_URB; i++)
-			usb_kill_urb(portdata->out_urbs[i]);
-		usb_autopm_get_interface(serial->interface);
-		serial->interface->needs_remote_wakeup = 0;
-	}
-}
-
-/* Helper functions used by option_setup_urbs */
-static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
-		int dir, void *ctx, char *buf, int len,
-		void (*callback)(struct urb *))
-{
-	struct urb *urb;
-
-	if (endpoint == -1)
-		return NULL;		/* endpoint not needed */
-
-	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
-	if (urb == NULL) {
-		dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
-		return NULL;
-	}
-
-		/* Fill URB using supplied data. */
-	usb_fill_bulk_urb(urb, serial->dev,
-		      usb_sndbulkpipe(serial->dev, endpoint) | dir,
-		      buf, len, callback, ctx);
-
-	return urb;
-}
-
-/* Setup urbs */
-static void option_setup_urbs(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		/* Do indat endpoints first */
-		for (j = 0; j < N_IN_URB; ++j) {
-			portdata->in_urbs[j] = option_setup_urb(serial,
-					port->bulk_in_endpointAddress,
-					USB_DIR_IN, port,
-					portdata->in_buffer[j],
-					IN_BUFLEN, option_indat_callback);
-		}
-
-		/* outdat endpoints */
-		for (j = 0; j < N_OUT_URB; ++j) {
-			portdata->out_urbs[j] = option_setup_urb(serial,
-					port->bulk_out_endpointAddress,
-					USB_DIR_OUT, port,
-					portdata->out_buffer[j],
-					OUT_BUFLEN, option_outdat_callback);
-		}
-	}
-}
-
-
 /** send RTS/DTR state to the port.
  *
  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
@@ -1228,224 +836,6 @@ static int option_send_setup(struct usb_serial_port *port)
 		0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
-static int option_startup(struct usb_serial *serial)
-{
-	int i, j, err;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-	u8 *buffer;
-
-	dbg("%s", __func__);
-
-	/* Now setup per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
-		if (!portdata) {
-			dbg("%s: kmalloc for option_port_private (%d) failed!.",
-					__func__, i);
-			return 1;
-		}
-		init_usb_anchor(&portdata->delayed);
-
-		for (j = 0; j < N_IN_URB; j++) {
-			buffer = (u8 *)__get_free_page(GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error;
-			portdata->in_buffer[j] = buffer;
-		}
-
-		for (j = 0; j < N_OUT_URB; j++) {
-			buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error2;
-			portdata->out_buffer[j] = buffer;
-		}
-
-		usb_set_serial_port_data(port, portdata);
-
-		if (!port->interrupt_in_urb)
-			continue;
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-		if (err)
-			dbg("%s: submit irq_in urb failed %d",
-				__func__, err);
-	}
-	option_setup_urbs(serial);
-	return 0;
-
-bail_out_error2:
-	for (j = 0; j < N_OUT_URB; j++)
-		kfree(portdata->out_buffer[j]);
-bail_out_error:
-	for (j = 0; j < N_IN_URB; j++)
-		if (portdata->in_buffer[j])
-			free_page((unsigned long)portdata->in_buffer[j]);
-	kfree(portdata);
-	return 1;
-}
-
-static void stop_read_write_urbs(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	/* Stop reading/writing urbs */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-		for (j = 0; j < N_IN_URB; j++)
-			usb_kill_urb(portdata->in_urbs[j]);
-		for (j = 0; j < N_OUT_URB; j++)
-			usb_kill_urb(portdata->out_urbs[j]);
-	}
-}
-
-static void option_disconnect(struct usb_serial *serial)
-{
-	dbg("%s", __func__);
-
-	stop_read_write_urbs(serial);
-}
-
-static void option_release(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-
-	/* Now free them */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		for (j = 0; j < N_IN_URB; j++) {
-			if (portdata->in_urbs[j]) {
-				usb_free_urb(portdata->in_urbs[j]);
-				free_page((unsigned long)
-					portdata->in_buffer[j]);
-				portdata->in_urbs[j] = NULL;
-			}
-		}
-		for (j = 0; j < N_OUT_URB; j++) {
-			if (portdata->out_urbs[j]) {
-				usb_free_urb(portdata->out_urbs[j]);
-				kfree(portdata->out_buffer[j]);
-				portdata->out_urbs[j] = NULL;
-			}
-		}
-	}
-
-	/* Now free per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		kfree(usb_get_serial_port_data(port));
-	}
-}
-
-#ifdef CONFIG_PM
-static int option_suspend(struct usb_serial *serial, pm_message_t message)
-{
-	struct option_intf_private *intfdata = serial->private;
-	int b;
-
-	dbg("%s entered", __func__);
-
-	if (message.event & PM_EVENT_AUTO) {
-		spin_lock_irq(&intfdata->susp_lock);
-		b = intfdata->in_flight;
-		spin_unlock_irq(&intfdata->susp_lock);
-
-		if (b)
-			return -EBUSY;
-	}
-
-	spin_lock_irq(&intfdata->susp_lock);
-	intfdata->suspended = 1;
-	spin_unlock_irq(&intfdata->susp_lock);
-	stop_read_write_urbs(serial);
-
-	return 0;
-}
-
-static void play_delayed(struct usb_serial_port *port)
-{
-	struct option_intf_private *data;
-	struct option_port_private *portdata;
-	struct urb *urb;
-	int err;
-
-	portdata = usb_get_serial_port_data(port);
-	data = port->serial->private;
-	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (!err)
-			data->in_flight++;
-	}
-}
-
-static int option_resume(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_intf_private *intfdata = serial->private;
-	struct option_port_private *portdata;
-	struct urb *urb;
-	int err = 0;
-
-	dbg("%s entered", __func__);
-	/* get the interrupt URBs resubmitted unconditionally */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		if (!port->interrupt_in_urb) {
-			dbg("%s: No interrupt URB for port %d\n", __func__, i);
-			continue;
-		}
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
-		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
-		if (err < 0) {
-			err("%s: Error %d for interrupt URB of port%d",
-				 __func__, err, i);
-			goto err_out;
-		}
-	}
-
-	for (i = 0; i < serial->num_ports; i++) {
-		/* walk all ports */
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		/* skip closed ports */
-		spin_lock_irq(&intfdata->susp_lock);
-		if (!portdata->opened) {
-			spin_unlock_irq(&intfdata->susp_lock);
-			continue;
-		}
-
-		for (j = 0; j < N_IN_URB; j++) {
-			urb = portdata->in_urbs[j];
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err < 0) {
-				err("%s: Error %d for bulk URB %d",
-					 __func__, err, i);
-				spin_unlock_irq(&intfdata->susp_lock);
-				goto err_out;
-			}
-		}
-		play_delayed(port);
-		spin_unlock_irq(&intfdata->susp_lock);
-	}
-	spin_lock_irq(&intfdata->susp_lock);
-	intfdata->suspended = 0;
-	spin_unlock_irq(&intfdata->susp_lock);
-err_out:
-	return err;
-}
-#endif
-
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
-- 
1.6.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux