Linux USB Users

• Thread Index

• [PATCH v1 1/9] usb: musb: dsps: enable dual instance support for am33xx platform
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v1 3/9] arch: arm: omap3: remove unused usb_nop_xceive register API's
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v1 4/9] usb: phy: nop: removing unused usb_nop_xceiv_(un_)register API
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v1 6/9] usb: musb: dsps: use usb-phy driver API for phy power on/off
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v1 7/9] usb: musb: dsps: use get-usb-phy by phandle for multi instance
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v1 8/9] usb: phy: dts: Adding usbphy DT bindings for am33xx
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v1 9/9] usb: musb: dsp: remove the usb-phy control acess from platform glue
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH v1 5/9] usb: phy: dsps: adding usbphy driver for am33xx platform
  • From: Ravi Babu <ravibabu@xxxxxx>
• [PATCH 1/1] usb: host: ehci-spear: Remove redundant checks
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: host: ehci-spear: Fix potential NULL pointer dereferencing
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH] build some drivers only when compile-testing
  • From: Jeff Mahoney <jeffm@xxxxxxxx>
• Re: Misbehaving device
  • From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
• usb 1-1: ath9k_htc: Firmware - htc_9271.fw download failed
  • From: pingsheng pan <panpingsheng@xxxxxxxxx>
• Re: [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• Re: [PATCH] build some drivers only when compile-testing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RESEND PATCH v2] usb: gadget: f_mass_storage: add missing memory barrier for thread_wakeup_needed
  • From: UCHINO Satoshi <satoshi.uchino@xxxxxxxxxxxxx>
• Re: Misbehaving device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] qmi_wwan: Added support for Cinterion's PLxx WWAN Interface
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v2] staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: Misbehaving device
  • From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
• [PATCH] staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH] HID: usbhid: ignore Jabra speakerphones HID interface
  • From: Vincent Palatin <vpalatin@xxxxxxxxxxxx>
• Re: [PATCH] HID: usbhid: ignore Jabra speakerphones HID interface
  • From: Vincent Palatin <vpalatin@xxxxxxxxxxxx>
• Re: [PATCH] HID: usbhid: ignore Jabra speakerphones HID interface
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH] HID: usbhid: ignore Jabra speakerphones HID interface
  • From: Vincent Palatin <vpalatin@xxxxxxxxxxxx>
• Re: [PATCH] staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] staging: dwc2: remove compile warning for USB_DWC2_TRACK_MISSED_SOFS
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [OPW kernel] dma_set_coherent_mask
  • From: Don Dutile <ddutile@xxxxxxxxxx>
• Re: Huawei 3276 with option and cdc_ncm
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Huawei 3276 with option and cdc_ncm
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: Huawei 3276 with option and cdc_ncm
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Misbehaving device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Misbehaving device
  • From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
• Re: Huawei 3276 with option and cdc_ncm
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drivers/usb/host: remove leftover release_mem_region
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: host: ehci-spear: Fix potential NULL pointer dereferencing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] drivers/usb/host: remove leftover release_mem_region
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: add usb2 Link PM variables to sysfs and usb_device
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• 2 USB host instances on am33xx
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH 13/15] chipidea: Allow user to select PCI/IMX options
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: [PATCH 13/15] chipidea: Allow user to select PCI/IMX options
  • From: Jiri Slaby <jslaby@xxxxxxx>
• Re: [PATCH] xhci: Add BayTrail to list of Intel switchable hosts
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Add BayTrail to list of Intel switchable hosts
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] usb: host: ehci-omap: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: host: ehci-spear: Fix potential NULL pointer dereferencing
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 1/1] usb: host: ehci-spear: Fix potential NULL pointer dereferencing
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH v2] usb: omap2430: fix memleak in err case
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: Gu Zheng <guz.fnst@xxxxxxxxxxxxxx>
• Misbehaving device
  • From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] usb: misc: usb3503: Add to select the ports to disable
  • From: Dongjin Kim <tobetter@xxxxxxxxx>
• [PATCH 2/2] usb: misc: usb3503: Adding device tree entry 'disabled-ports'
  • From: Dongjin Kim <tobetter@xxxxxxxxx>
• Re: [RFT 0/2] TI compliance mode fixes
  • From: Tony Camuso <tcamuso@xxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: phy: samsung: Add support HSIC on Exynos4X12
  • From: Dongjin Kim <tobetter@xxxxxxxxx>
• Re: [PATCH 1/8] usb: host: ehci-omap: Remove redundant use of of_match_ptr
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] usb: host: ehci-omap: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: [PATCH V2] usb: ehci-s5p: skip phy setup for Exynos5440 based platforms
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] usb: host: ehci-omap: Remove redundant use of of_match_ptr
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Add BayTrail to list of Intel switchable hosts
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: add usb2 Link PM variables to sysfs and usb_device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] qmi_wwan: Added support for Cinterion's PLxx WWAN Interface
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/8] usb: host: ehci-omap: Remove redundant use of of_match_ptr
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: i.MX28EVK: ChipIDEA as device (or OTG) support in 3.10-rc2 or later?
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Add BayTrail to list of Intel switchable hosts
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] usb: host: ohci-spear: Remove redundant use of of_match_ptr
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 3/8] usb: host: ehci-spear: Remove redundant use of of_match_ptr
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] qmi_wwan: Added support for Cinterion's PLxx WWAN Interface
  • From: Schmiedl Christian <Christian.Schmiedl@xxxxxxxxxxx>
• Re: [PATCH 1/8] usb: host: ehci-omap: Remove redundant use of of_match_ptr
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 8/8] usb: phy: phy-nop: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 7/8] usb: host: uhci-platform: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 4/8] usb: host: ehci-orion: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 6/8] usb: host: ohci-spear: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 5/8] usb: host: ohci-omap3: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 3/8] usb: host: ehci-spear: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 2/8] usb: host: ehci-platform: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 1/8] usb: host: ehci-omap: Remove redundant use of of_match_ptr
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• i.MX28EVK: ChipIDEA as device (or OTG) support in 3.10-rc2 or later?
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 2/4] usb: xhci: define port register names and use them instead of magic numbers
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 1/4] usb: xhci: check usb2 port capabilities before adding hw link PM support
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 0/4] Add usb2 link powermanagement BESL support
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 3/4] usb: xhci: add USB2 Link power management BESL support
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 4/4] usb: add usb2 Link PM variables to sysfs and usb_device
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: Gu Zheng <guz.fnst@xxxxxxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: Gu Zheng <guz.fnst@xxxxxxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Reagrding interrupt end point transfers
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [RFC PATCH 4/4] usb: add usb2 Link PM variables to sysfs and usb_device
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH] xhci: Add BayTrail to list of Intel switchable hosts
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/9] Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 02/19] drivers/usb/host: add missing platform_driver owner
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH V2] usb: ehci-s5p: skip phy setup for Exynos5440 based platforms
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 06/19] drivers/usb/phy: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH 01/19] drivers/usb/musb: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH 04/19] drivers/usb/dwc3: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH 07/19] drivers/usb/gadget: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH 02/19] drivers/usb/host: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH 03/19] drivers/usb/chipidea: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH 00/19] driver:usb&net: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH 05/19] drivers/ust/renesas_usbhs: add missing platform_driver owner
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH -next] usb: fusbh200-hcd: fix error handling in fusbh200_hcd_fusbh200_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH -next] usb: fusbh200-hcd: convert list_for_each to entry variant
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH 2/2] usb: host: fusbh200-hcd: Staticize local symbols
  • From: Yuan-Hsin Chen <yuanlmm@xxxxxxxxx>
• Re: [PATCH 1/2] usb: dwc3: pci: PHY should be deleted later than dwc3 core
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Question about "generic" HID devices
  • From: Daniel Santos <danielfsantos@xxxxxxx>
• [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] net/usb/r8152: Use module_usb_driver to register driver
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] USB: ftdi: add full listing for RT Systems ftdi devices
  • From: "Rick \"Zero_Chaos\" Farina" <zerochaos@xxxxxxxxxx>
• [PATCH] uwb/whci: Use module_pci_driver to register driver
  • From: Peter Huewe <peterhuewe@xxxxxx>
• [PATCH] net/usb/r8152: Use module_usb_driver to register driver
  • From: Peter Huewe <peterhuewe@xxxxxx>
• Re: [PATCH] usb/misc/usb3503: Use module_i2c_driver to register driver
  • From: Peter Hüwe <PeterHuewe@xxxxxx>
• [patch] usb: uwb: use correct locking calls for rc data
  • From: tpugliese <thomas.pugliese@xxxxxxxxx>
• [PATCH] usb/misc/usb3503: Use module_i2c_driver to register driver
  • From: Peter Huewe <peterhuewe@xxxxxx>
• [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCH 2/7] USB: gadget: atmel_usba: allow multi instance
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCH 0/7 v4] ARM: at91: dt: add USBA support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCH 2/7] USB: gadget: atmel_usba: allow multi instance
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCH 3/7] USB: gadget: atmel_usba: add DT support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCH 3/7] USB: gadget: atmel_usba: add DT support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH 1/5] usb: add Atmel USBA UDC DT support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: exynos: PHY should be deleted later than dwc3 core
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: pci: PHY should be deleted later than dwc3 core
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Crash in dwc3 driver on module unload
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 19/39] ARM: ux500: Register Cyrp and Hash platform drivers on Snowball
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 18/39] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 16/39] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• testusb: test13 is broken at super speed
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 14/39] ARM: ux500: Stop passing Hash DMA channel config information though pdata
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/5] usb: add Atmel USBA UDC DT support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH 0/7] USB: serial: add wait_until_sent-support
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: usb sysfs file handling functions don't take
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: host: fusbh200-hcd: Staticize local symbols
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: host: fusbh200-hcd: Staticize local symbols
  • From: Yuan-Hsin Chen <yuanlmm@xxxxxxxxx>
• [PATCH 2/2] usb: host: fusbh200-hcd: Staticize local symbols
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 1/2] usb: host: fusbh200-hcd: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• usb:is that a bug?
  • From: linux fddl <fddllinux@xxxxxxxxx>
• RE: Regression in 3735ba8db8e6ea22ad3ff524328926d8d780a884 with Freescale P1020
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• RE: Regression in 3735ba8db8e6ea22ad3ff524328926d8d780a884 with Freescale P1020
  • From: Liu Shengzhou-B36685 <B36685@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] usb: add Atmel USBA UDC DT support
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• Re: Crash in dwc3 driver on module unload
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH 2/2] usb: dwc3: exynos: PHY should be deleted later than dwc3 core
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 1/2] usb: dwc3: pci: PHY should be deleted later than dwc3 core
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [patch] USB: cxacru: potential underflow in cxacru_cm_get_array()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [Libusbx-devel] Linux sysfs usb descriptors file has broken configuration length handling
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Regression in 3735ba8db8e6ea22ad3ff524328926d8d780a884 with Freescale P1020
  • From: Michael Braun <michael.braun@xxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] Linux sysfs usb descriptors file has broken configuration length handling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Question about "generic" HID devices
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] Linux sysfs usb descriptors file has broken configuration length handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Question about "generic" HID devices
  • From: Daniel Santos <danielfsantos@xxxxxxx>
• Re: Question about "generic" HID devices
  • From: Daniel Santos <danielfsantos@xxxxxxx>
• Re: [Libusbx-devel] Linux sysfs usb descriptors file has broken configuration length handling
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] Linux sysfs usb descriptors file has broken configuration length handling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb sysfs file handling functions don't take
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Question about "generic" HID devices
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Linux sysfs usb descriptors file has broken configuration length handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• usb sysfs file handling functions don't take
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Question about "generic" HID devices
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Question about "generic" HID devices
  • From: Daniel Santos <danielfsantos@xxxxxxx>
• [GIT PULL] ARM: tegra: DT-related fixes needed by the USB tree
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/8] ARM: tegra: update device trees for USB binding rework
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH Resend 2/2] net/usb: r8152: Use module_usb_driver()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH Resend 1/2] net/usb: r8152: Remove redundant version.h header inclusion
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Question about dummy_hcd
  • From: Jean-Edouard Lejosne <jed@xxxxxxxxxx>
• Re: Question about dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4] usb: ehci: Only sleep for post-resume handover if devices use persist
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [RFT 0/2] TI compliance mode fixes
  • From: Tony Camuso <tcamuso@xxxxxxxxxx>
• [PATCH] USB:ftdi_sio: Add support for Newport CONEX motor drivers
  • From: "Gomella, Andrew (NIH/NHLBI) [F]" <andrew.gomella@xxxxxxx>
• RE: [PATCH] staging: dwc2: Fix dma-enabled platform devices using a default dma_mask
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 0/5 v3] ARM: at91: dt: add USBA support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• drivers/usb/core/devio.c, USB3.0 and "arbitrary limit for USB2"
  • From: Federico Manzan <f.manzan@xxxxxxxxx>
• Re: [RFC PATCH 4/4] usb: add usb2 Link PM variables to sysfs and usb_device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] usb: add Atmel USBA UDC DT support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: Crash in dwc3 driver on module unload
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb:is that a bug?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 7/9] rcar-phy: add platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC PATCH 4/4] usb: add usb2 Link PM variables to sysfs and usb_device
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH 3/4] usb: xhci: add USB2 Link power management BESL support
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH 2/4] usb: xhci: define port register names and use them instead of magic numbers
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH 1/4] usb: xhci: check usb2 port capabilities before adding hw link PM support
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH 0/4] Add usb2 link powermanagement BESL support
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RFC PATCH 4/4] arm: omap: remove using usb_bind_phy for binding musb and phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 3/4] usb: musb: omap: use the new API to get PHY reference by label
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 2/4] usb: phy: add a new API to get PHY ref by label
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Huawei 3276 with option and cdc_ncm
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Huawei 3276 with option and cdc_ncm
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• [PATCH v5] usb host: Faraday USB2.0 FUSBH200-HCD driver
  • From: Yuan-Hsin Chen <yuanlmm@xxxxxxxxx>
• [PATCH 12/12] usb: host: uhci-platform: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 11/12] usb: host: oxu210hp-hcd: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 10/12] usb: host: ohci-tmio: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 09/12] usb: host: ohci-tilegx: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 08/12] usb: host: ohci-omap: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 07/12] usb: host: ohci-octeon: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 06/12] usb: host: ohci-nxp: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 05/12] usb: host: ohci-da8xx: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 04/12] usb: host: ehci-tilegx: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 03/12] usb: gadget: pxa27x_udc: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 02/12] usb: gadget: mv_u3d_core: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 01/12] usb: chipidea: ci13xxx_imx: Remove redundant platform_set_drvdata()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH v4] usb host: Faraday USB2.0 FUSBH200-HCD driver
  • From: Yuan-Hsin Chen <yuanlmm@xxxxxxxxx>
• Re: Crash in dwc3 driver on module unload
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH] staging: dwc2: Fix dma-enabled platform devices using a default dma_mask
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH 03/10] usb: phy: ab8500-usb: add transceiver clock control
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/7] staging: dwc2: miscellaneous cleanups
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/4] usb: tilegx: fix memleak when create hcd fail
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• [PATCH Resend 1/2] net/usb: r8152: Remove redundant version.h header inclusion
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH Resend 2/2] net/usb: r8152: Use module_usb_driver()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• usb:is that a bug?
  • From: linux fddl <fddllinux@xxxxxxxxx>
• Re: [PATCH 1/4] staging: dwc2: Set a default dma_mask for platform devices
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] usb: ohci: fix goto wrong tag in err case
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: ftdi: add full listing for RT Systems ftdi devices
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: tilegx: fix memleak when create hcd fail
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2] usb: ohci: fix goto wrong tag in err case
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 6/6] USB: IOCTL to toggle the quirk (not required).
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v3] usb: ehci: Only sleep for post-resume handover if devices use persist
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] usb host: Faraday USB2.0 FUSBH200-HCD driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] staging: dwc2: miscellaneous cleanups
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/4] staging: dwc2: Set a default dma_mask for platform devices
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v4 3/8] ARM: tegra: update device trees for USB binding rework
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] usb: phy: tegra: Add error handling & clean up.
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH] lsusb: Fix bug in USB 2.0 extended caps descriptor.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH 0/2] Add multiple transfer descriptors support to chipidea udc
  • From: "Svetoslav Neykov" <svetoslav@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [OPW kernel] dma_set_coherent_mask
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb: musb: Fix LapDock enumeration on omap for boot and slow cable insertion
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 23/33] drivers/usb/host: don't check resource with devm_ioremap_resource
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/8] Tegra USB PHY driver series
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH v4 2/8] arm: dt: Tegra20: Modify ULPI reset GPIO properties
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH v4 4/8] usb: phy: tegra: Return correct error value provided by clk_get_sys
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH v4 5/8] usb: phy: tegra: Get PHY mode using DT
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH v4 6/8] usb: phy: tegra: get ULPI reset GPIO info using DT.
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH v4 7/8] usb: phy: tegra: Add error handling & clean up.
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH v4 8/8] usb: phy: registering Tegra USB PHY as platform driver
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH v4 3/8] ARM: tegra: update device trees for USB binding rework
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH v4 1/8] ARM: tegra: finalize USB EHCI and PHY bindings
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [OPW kernel] dma_set_coherent_mask
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 21/33] drivers/usb/chipidea: don't check resource with devm_ioremap_resource
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH 18/33] drivers/staging/dwc2: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 21/33] drivers/usb/chipidea: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 23/33] drivers/usb/host: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 22/33] drivers/usb/gadget: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 24/33] drivers/usb/phy: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: chipidea: udc: add multiple td support to hardware_{en,de}queue
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH] qmi_wwan: Added support for Cinterion's PLxx WWAN Interface
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 2/2] usb: chipidea: udc: add multiple td support to hardware_{en,de}queue
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH v2 3/6] usb: phy: samsung: Consolidate reference clock rate handling
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v2 6/6] usb: phy: samsung: Add support for USB 2.0 PHY on Exynos 4x12
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v2 5/6] usb: phy: samsung: Pass enable/disable callbacks through driver data
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v2 4/6] usb: phy: samsung: Pass set_isolation callback through driver data
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v2 2/6] usb: phy: samsung: Use clk_get to get reference clock
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v2 1/6] usb: phy: samsung: Select common driver part implicitly
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH v2 0/6] Samsung USB PHY SoC support cleanup
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• Re: [PATCH 0/2] Add multiple transfer descriptors support to chipidea udc
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 13/15] chipidea: Allow user to select PCI/IMX options
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: [PATCH v2] usb: chipidea: udc: configure iso endpoints
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 2/9] usb/gadget: nokia: convert to new interface of f_obex
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2] usb: chipidea: udc: configure iso endpoints
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 01/39] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 07/39] dmaengine: ste_dma40: Only use addresses passed as configuration information
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 10/39] dmaengine: ste_dma40: Correct copy/paste error
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 08/39] dmaengine: ste_dma40: Remove redundant address fetching function
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 03/39] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 01/39] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 38/39] dmaengine: ste_dma40: Fetch the number of physical channels from DT
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 18/39] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config()
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 16/39] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 39/39] dmaengine: ste_dma40: Fetch disabled channels from DT
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 33/39] dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 36/39] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: About usbmisc_imx.c at chipidea driver
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: udc: configure iso endpoints
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [OPW kernel] dma_set_coherent_mask
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: xhci: Consolidate XHCI TD Size calculation
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCH 1/4] staging: dwc2: Set a default dma_mask for platform devices
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• RE: [PATCH 1/4] staging: dwc2: Set a default dma_mask for platform devices
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• Re: [PATCH 1/4] staging: dwc2: Set a default dma_mask for platform devices
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [GIT PULL] USB fixes for v3.10-rc2
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 11/39] ARM: ux500: Remove unnecessary attributes from DMA channel request pdata
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 10/39] dmaengine: ste_dma40: Correct copy/paste error
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 09/39] ARM: ux500: Remove DMA address look-up table
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 06/39] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 08/39] dmaengine: ste_dma40: Remove redundant address fetching function
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] USB fixes for v3.10-rc2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/39] dmaengine: ste_dma40: Only use addresses passed as configuration information
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 05/39] ARM: ux500: Stop passing MMC's platform data for Device Tree boots
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 04/39] ARM: ux500: Stop passing UART's platform data for Device Tree boots
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 03/39] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 01/39] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 13/15] chipidea: Allow user to select PCI/IMX options
  • From: Jiri Slaby <jslaby@xxxxxxx>
• [PATCH 2/2] usb: chipidea: udc: add multiple td support to hardware_{en,de}queue
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH 1/2] usb: chipidea: udc: manage dynamic amount of tds with an linked list
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH 0/2] Add multiple transfer descriptors support to chipidea udc
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [GIT PULL] USB fixes for v3.10-rc2
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: fix Kconfig logic for USB_UHCI_HCD
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [OPW kernel] dma_set_coherent_mask
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [V9 PATCH 00/12] mv-usb phy driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: dwc3 on omap5432 no SuperSpeed host mode
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: dwc3 on omap5432 no SuperSpeed host mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/2] usb: chipidea: big-endian support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [OPW kernel] xhci.c: dma_set_mask
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Add isp1763-hcd driver
  • From: Richard Retanubun <RichardRetanubun@xxxxxxxxxxxxx>
• Re: [PATCH] USB: fix Kconfig logic for USB_UHCI_HCD
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: dwc3 on omap5432 no SuperSpeed host mode
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: dwc3 on omap5432 no SuperSpeed host mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: usb: musb: Fix LapDock enumeration on omap for boot and slow cable insertion
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 9/9] rcar-phy: handle platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 9/9] rcar-phy: handle platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] qmi_wwan: Added support for Cinterion's PLxx WWAN Interface
  • From: Schmiedl Christian <Christian.Schmiedl@xxxxxxxxxxx>
• Re: [PATCH] qmi_wwan: Added support for Cinterion's PLxx WWAN Interface
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] usb: otg: mxs-phy: add missing type to usb_phy
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH 3/9] usb/gadget: f_obex: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 4/9] usb/gadget: phonet: move global dev variable to its user
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 5/9] usb/gadget: f_phonet: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 8/9] usb/gadget: nokia: convert to new interface of f_ecm
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 9/9] usb/gadget: f_phonet: add configfs support
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 7/9] usb/gadget: f_phonet: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 6/9] usb/gadget: nokia: convert to new interface of f_phonet
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 2/9] usb/gadget: nokia: convert to new interface of f_obex
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 1/9] usb/gadget: f_obex: use usb_gstrings_attach
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 0/9] Equivalent of g_nokia.ko with configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH] qmi_wwan: Added support for Cinterion's PLxx WWAN Interface
  • From: Schmiedl Christian <Christian.Schmiedl@xxxxxxxxxxx>
• [PATCH 10/10] usb: phy: ab8500-usb: add ab9540 support
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 01/10] usb: musb: enable ux500 host side dma support
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 02/10] usb: musb: various cosmetic fixes on ux500 files
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 03/10] usb: phy: ab8500-usb: add transceiver clock control
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 05/10] usb: phy: ab8500-usb: fix phy tuning value select logic
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 06/10] usb: phy: ab8500-usb: add platform_device_id table
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 07/10] usb: phy: ab8500-usb: move phy tuning values on separate functions
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 08/10] usb: phy: ab8500-usb: add flag bits to control driver features
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 09/10] usb: phy: ab8500-usb: add ab8540 support
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 04/10] usb: phy: ab8500-usb: restart phy during probe
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH -next 00/10] Various updates for ux500 musb and phy drivers
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• Re: [PATCH] console/font: Refactor font support code selection logic
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH] console/font: Refactor font support code selection logic
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: About usbmisc_imx.c at chipidea driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: About usbmisc_imx.c at chipidea driver
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: About usbmisc_imx.c at chipidea driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: About usbmisc_imx.c at chipidea driver
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• About usbmisc_imx.c at chipidea driver
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 00/39] Continuation of DMA changes in ux500 based drivers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 01/39] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 03/39] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 05/39] ARM: ux500: Stop passing MMC's platform data for Device Tree boots
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 07/39] dmaengine: ste_dma40: Only use addresses passed as configuration information
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 06/39] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 08/39] dmaengine: ste_dma40: Remove redundant address fetching function
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 10/39] dmaengine: ste_dma40: Correct copy/paste error
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 11/39] ARM: ux500: Remove unnecessary attributes from DMA channel request pdata
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 09/39] ARM: ux500: Remove DMA address look-up table
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 16/39] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 14/39] ARM: ux500: Stop passing Hash DMA channel config information though pdata
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 17/39] ARM: ux500: Stop passing Cryp DMA channel config information though pdata
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 18/39] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 19/39] ARM: ux500: Register Cyrp and Hash platform drivers on Snowball
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 21/39] usb: musb: ux500: move the MUSB HDRC configuration into the driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 22/39] usb: musb: ux500: take the dma_mask from coherent_dma_mask
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 23/39] usb: musb: ux500: harden checks for platform data
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 25/39] usb: musb: ux500: add device tree probing support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 24/39] usb: musb: ux500: attempt to find channels by name before using pdata
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 26/39] ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 30/39] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 29/39] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 28/39] ARM: ux500: Remove empty function u8500_of_init_devices()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 33/39] dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 32/39] ARM: ux500: Remove recently unused stedma40_xfer_dir enums
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 37/39] ARM: ux500: Stop passing DMA platform data though AUXDATA
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 36/39] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 38/39] dmaengine: ste_dma40: Fetch the number of physical channels from DT
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 39/39] dmaengine: ste_dma40: Fetch disabled channels from DT
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 27/39] ARM: ux500: Remove ux500-musb platform registation when booting with DT
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 04/39] ARM: ux500: Stop passing UART's platform data for Device Tree boots
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] usb: chipidea: udc: configure iso endpoints
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] usb/gadget: add helpers for configfs support for USB Ethernet
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 3/5] usb/gadget: cdc2: convert to new interface of f_ecm
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 4/5] usb/gadget: f_ecm: use usb_gstrings_attach
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 5/5] usb/gadget: f_ecm: add configfs support
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 2/5] usb/gadget: f_ecm: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 0/5] Equivalent of g_cdc.ko with configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• RE: [PATCH v3 0/8] Equivalent of g_ncm.ko with configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 4/8] usb/gadget: f_ncm: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 3/8] usb/gadget: u_ether: construct with default values and add setters/getters
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 7/8] usb/gadget: f_ncm: use usb_gstrings_attach
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 5/8] usb/gadget: ncm: convert to new function interface
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 8/8] usb/gadget: f_ncm: add configfs support
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 6/8] usb/gadget: f_ncm: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 1/8] usb/gadget: u_ether: convert into module
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 2/8] usb/gadget: rndis: convert into module
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v3 0/8] Equivalent of g_ncm.ko with configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [OPW kernel] xhci.c: dma_set_mask
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [OPW kernel] dma_set_coherent_mask
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [OPW kernel] xhci.c: dma_set_mask
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: xhci: Consolidate XHCI TD Size calculation
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFT 0/2] TI compliance mode fixes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH] usb: chipidea: udc: configure iso endpoints
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [RFT 0/2] TI compliance mode fixes
  • From: Tony Camuso <tcamuso@xxxxxxxxxx>
• [PATCH] USB: OHCI: fix logic for scheduling isochronous URBs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: fix latency in uhci-hcd and ohci-hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: UHCI: fix for suspend of virtual HP controller
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: fix Kconfig logic for USB_UHCI_HCD
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: udc: configure iso endpoints
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] usb: chipidea: udc: configure iso endpoints
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: udc: configure iso endpoints
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH] usb: chipidea: udc: configure iso endpoints
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• [PATCH v2 5/8] usb/isp116x-hcd: take msecs_to_jiffies_timeout into use
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/13] usb: chipidea: ci13xxx_imx: Let device core handle pinctrl
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: Fix compilation break when building with USB_DWC3_DUAL_ROLE=y
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: undefined reference to `usb_gadget_unmap_request' regression
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• [PATCH 3/7] staging: dwc2: add helper variable to simplify code
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 7/7] staging: dwc2: remove some useless debug prints
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 6/7] staging: dwc2: add const to handling of dwc2_core_params
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 5/7] staging: dwc2: remove unneeded check
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 4/7] staging: dwc2: remove some device-mode related debug code
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 2/7] staging: dwc2: use dwc2_hcd_get_frame_number where possible
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 1/7] staging: dwc2: replace some magic numbers by constants
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 0/7] staging: dwc2: miscellaneous cleanups
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: UHCI/EHCI interrupt storm after resume from S3
  • From: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@xxxxxxxxx>
• Re: [PATCH] usb: phy: samsung: adding usbphy for Exynos4X12
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH] usb: phy: samsung: adding usbphy for Exynos4X12
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• RE: dwc2: Transaction errors with device connected at boot
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH] usb: phy: samsung: adding usbphy for Exynos4X12
  • From: Dongjin Kim <tobetter@xxxxxxxxx>
• RE: [PATCH] usb: phy: remove CONFIG_USB_OTG_UTILS once more
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH] dwc2/pci.c: add STMICRO vendor and device ID for STA2X11 board
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH] dwc2/pci.c: add STMICRO vendor and device ID for STA2X11 board
  • From: Federico Vaga <federico.vaga@xxxxxxxxx>
• Re: [PATCH v3 03/10] ARM: tegra: update device trees for USB binding rework
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v3 02/10] arm: dt: Tegra20: Modify ULPI reset GPIO properties
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v3 01/10] ARM: tegra: finalize USB EHCI and PHY bindings
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: musb throughput issues
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: usb: why we need a msleep(5) in ehci_bus_suspend/resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCh V10 04/12] usb: ehci: ehci-mv: use PHY driver for ehci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: musb throughput issues
  • From: Frederik Schmid <frederik.schmid@xxxxxxxxx>
• Re: musb throughput issues
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• Re: musb throughput issues
  • From: Frederik Schmid <frederik.schmid@xxxxxxxxx>
• Re: musb throughput issues
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: musb throughput issues
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: musb throughput issues
  • From: Frederik Schmid <frederik.schmid@xxxxxxxxx>