On 05/10/2013 07:54 AM, Venu Byravarasu wrote:
> The existing Tegra USB bindings have a few issues:
>
> 1) Many properties are documented as being part of the EHCI controller
> node, yet they apply more to the PHY device. They should be moved.
>
> 2) Some registers in PHY1 are shared with PHY3, and hence PHY3 needs a
> reg entry to point at PHY1's register space. We can't assume the PHY1
> driver is present, so the PHY3 driver will directly access those
> registers.
>
> 3) The list of clocks required by the PHY was missing some required
> entries.
>
> 4) UTMI PHY Timing parameters are added
>
> 5) VBUS control is now specified using a regulator rather than a plain GPIO
>
> 6) Added nvidia,is-wired property to indicate whether the device is
> hard wired on the board, or pluggable.
>
> This patch fixes the binding definition to resolve these issues.
> diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt
> + the USB controller.
> + - nvidia,is-wired : boolean. Indicates whether we can do certain kind of power
> + optimizations for the devices that are always connected. e.g. modem.
> + - dr_mode : dual role mode. Indicates the working mode for the PHY. Can be
> + "host", "peripheral", or "otg". Defaults to "host" if not defined.
> + host means this is a host controller
> + peripheral means it is device controller
> + otg means it can operate as either ("on the go")
Nit: Please leave a blank line here, to separate the sections/lists.
> +Required properties for dr_mode == otg:
> + - vbus-supply: regulator for VBUS
> \ No newline at end of file
Nit: Since you're reposting this series for other reasons, I'd like to
fix that "No newline at end of file"; please add a newline here.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
