[PATCH 03/10] usb: phy: ab8500-usb: add transceiver clock control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>

Add common clock support code for the ab8500-usb phy driver.

Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Acked-by: Maxime Coquelin <maxime.coquelin@xxxxxx>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
Signed-off-by: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
---
 drivers/usb/phy/phy-ab8500-usb.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index b043faa..cc0d7e5 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -29,6 +29,8 @@
 #include <linux/notifier.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/usb/musb-ux500.h>
@@ -126,6 +128,7 @@ struct ab8500_usb {
 	unsigned vbus_draw;
 	struct work_struct phy_dis_work;
 	enum ab8500_usb_mode mode;
+	struct clk *sysclk;
 	struct regulator *v_ape;
 	struct regulator *v_musb;
 	struct regulator *v_ulpi;
@@ -252,6 +255,9 @@ static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host)
 	if (IS_ERR(ab->pinctrl))
 		dev_err(ab->dev, "could not get/set default pinstate\n");
 
+	if (clk_prepare_enable(ab->sysclk))
+		dev_err(ab->dev, "can't prepare/enable clock\n");
+
 	ab8500_usb_regulator_enable(ab);
 
 	abx500_mask_and_set_register_interruptible(ab->dev,
@@ -274,6 +280,8 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
 	/* Needed to disable the phy.*/
 	ab8500_usb_wd_workaround(ab);
 
+	clk_disable_unprepare(ab->sysclk);
+
 	ab8500_usb_regulator_disable(ab);
 
 	if (!IS_ERR(ab->pinctrl)) {
@@ -784,6 +792,12 @@ static int ab8500_usb_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
+	ab->sysclk = devm_clk_get(ab->dev, "sysclk");
+	if (IS_ERR(ab->sysclk)) {
+		dev_err(ab->dev, "Could not get sysclk.\n");
+		return PTR_ERR(ab->sysclk);
+	}
+
 	err = ab8500_usb_irq_setup(pdev, ab);
 	if (err < 0)
 		return err;
-- 
1.8.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux