Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 15, 2013 at 10:51:25AM +0100, Lee Jones wrote:
> All configuration left in d40_phy_cfg() is runtime configurable and
> there is already a call into it from d40_runtime_config(), so let's
> rely on that.
> 
> Acked-by: Vinod Koul <vnod.koul@xxxxxxxxx>
That needs up update!

> Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
>  drivers/dma/ste_dma40.c    |   14 +++---
>  drivers/dma/ste_dma40_ll.c |  101 +++++++++++++++++++++-----------------------
>  drivers/dma/ste_dma40_ll.h |    3 +-
>  3 files changed, 58 insertions(+), 60 deletions(-)
> 
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index 759293e..b7fe46b 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -2043,6 +2043,14 @@ static int d40_config_memcpy(struct d40_chan *d40c)
>  	} else if (dma_has_cap(DMA_MEMCPY, cap) &&
>  		   dma_has_cap(DMA_SLAVE, cap)) {
>  		d40c->dma_cfg = dma40_memcpy_conf_phy;
> +
> +		/* Generate interrrupt at end of transfer or relink. */
> +		d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
> +
> +		/* Generate interrupt on error. */
> +		d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
> +		d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
> +
>  	} else {
>  		chan_err(d40c, "No memcpy\n");
>  		return -EINVAL;
> @@ -2496,9 +2504,6 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
>  	}
>  
>  	pm_runtime_get_sync(d40c->base->dev);
> -	/* Fill in basic CFG register values */
> -	d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg,
> -		    &d40c->dst_def_cfg, chan_is_logical(d40c));
>  
>  	d40_set_prio_realtime(d40c);
>  
> @@ -2862,8 +2867,7 @@ static int d40_set_runtime_config(struct dma_chan *chan,
>  	if (chan_is_logical(d40c))
>  		d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
>  	else
> -		d40_phy_cfg(cfg, &d40c->src_def_cfg,
> -			    &d40c->dst_def_cfg, false);
> +		d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
>  
>  	/* These settings will take precedence later */
>  	d40c->runtime_addr = config_addr;
> diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
> index 435a223..ab5a2a7 100644
> --- a/drivers/dma/ste_dma40_ll.c
> +++ b/drivers/dma/ste_dma40_ll.c
> @@ -50,63 +50,58 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
>  
>  }
>  
> -/* Sets up SRC and DST CFG register for both logical and physical channels */
> -void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
> -		 u32 *src_cfg, u32 *dst_cfg, bool is_log)
> +void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
>  {
>  	u32 src = 0;
>  	u32 dst = 0;
>  
> -	if (!is_log) {
> -		/* Physical channel */
> -		if ((cfg->dir ==  STEDMA40_PERIPH_TO_MEM) ||
> -		    (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> -			/* Set master port to 1 */
> -			src |= 1 << D40_SREG_CFG_MST_POS;
> -			src |= D40_TYPE_TO_EVENT(cfg->dev_type);
> -
> -			if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> -				src |= 1 << D40_SREG_CFG_PHY_TM_POS;
> -			else
> -				src |= 3 << D40_SREG_CFG_PHY_TM_POS;
> -		}
> -		if ((cfg->dir ==  STEDMA40_MEM_TO_PERIPH) ||
> -		    (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> -			/* Set master port to 1 */
> -			dst |= 1 << D40_SREG_CFG_MST_POS;
> -			dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
> -
> -			if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> -				dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
> -			else
> -				dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
> -		}
> -		/* Interrupt on end of transfer for destination */
> -		dst |= 1 << D40_SREG_CFG_TIM_POS;
> -
> -		/* Generate interrupt on error */
> -		src |= 1 << D40_SREG_CFG_EIM_POS;
> -		dst |= 1 << D40_SREG_CFG_EIM_POS;
> -
> -		/* PSIZE */
> -		if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
> -			src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> -			src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
> -		}
> -		if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
> -			dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> -			dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
> -		}
> -
> -		/* Element size */
> -		src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
> -		dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
> -
> -		/* Set the priority bit to high for the physical channel */
> -		if (cfg->high_priority) {
> -			src |= 1 << D40_SREG_CFG_PRI_POS;
> -			dst |= 1 << D40_SREG_CFG_PRI_POS;
> -		}
> +	if ((cfg->dir ==  STEDMA40_PERIPH_TO_MEM) ||
> +	    (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> +		/* Set master port to 1 */
> +		src |= 1 << D40_SREG_CFG_MST_POS;
> +		src |= D40_TYPE_TO_EVENT(cfg->dev_type);
> +
> +		if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> +			src |= 1 << D40_SREG_CFG_PHY_TM_POS;
> +		else
> +			src |= 3 << D40_SREG_CFG_PHY_TM_POS;
> +	}
> +	if ((cfg->dir ==  STEDMA40_MEM_TO_PERIPH) ||
> +	    (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> +		/* Set master port to 1 */
> +		dst |= 1 << D40_SREG_CFG_MST_POS;
> +		dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
> +
> +		if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> +			dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
> +		else
> +			dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
> +	}
> +	/* Interrupt on end of transfer for destination */
> +	dst |= 1 << D40_SREG_CFG_TIM_POS;
> +
> +	/* Generate interrupt on error */
> +	src |= 1 << D40_SREG_CFG_EIM_POS;
> +	dst |= 1 << D40_SREG_CFG_EIM_POS;
> +
> +	/* PSIZE */
> +	if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
> +		src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> +		src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
> +	}
> +	if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
> +		dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> +		dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
> +	}
> +
> +	/* Element size */
> +	src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
> +	dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
> +
> +	/* Set the priority bit to high for the physical channel */
> +	if (cfg->high_priority) {
> +		src |= 1 << D40_SREG_CFG_PRI_POS;
> +		dst |= 1 << D40_SREG_CFG_PRI_POS;
>  	}
>  
>  	if (cfg->src_info.big_endian)
> diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
> index fdde8ef..1b47312 100644
> --- a/drivers/dma/ste_dma40_ll.h
> +++ b/drivers/dma/ste_dma40_ll.h
> @@ -432,8 +432,7 @@ enum d40_lli_flags {
>  
>  void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
>  		 u32 *src_cfg,
> -		 u32 *dst_cfg,
> -		 bool is_log);
> +		 u32 *dst_cfg);
>  
>  void d40_log_cfg(struct stedma40_chan_cfg *cfg,
>  		 u32 *lcsp1,
> -- 
> 1.7.10.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux