Linux USB Users

• Thread Index

• Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: add usb_clk for transition to common clk framework
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] dwc3: dwc3-pci: Use SIMPLE_DEV_PM_OPS
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: Bug 60738 - USB 3.0 connection delay seems to be too short for HP USB 3.0 hard drive
  • From: Alexandre Demers <alexandre.f.demers@xxxxxxxxx>
• Re: Bug 60738 - USB 3.0 connection delay seems to be too short for HP USB 3.0 hard drive
  • From: Kumar Gaurav <kumargauravgupta3@xxxxxxxxx>
• Re: Regression: USB memory stick stalls and no longer automounts under 3.11-rc1
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2] usb: core: don't try to reset_device() a port that got just disconnected
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Bug 60738 - USB 3.0 connection delay seems to be too short for HP USB 3.0 hard drive
  • From: Alexandre Demers <alexandre.f.demers@xxxxxxxxx>
• Re: Bug 60738 - USB 3.0 connection delay seems to be too short for HP USB 3.0 hard drive
  • From: Greg KH <greg@xxxxxxxxx>
• Bug 60738 - USB 3.0 connection delay seems to be too short for HP USB 3.0 hard drive
  • From: Alexandre Demers <alexandre.f.demers@xxxxxxxxx>
• RE: DWC3 role switch cause IRQ request failed
  • From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: RTL8192CU module device HW:ID support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: RTL8192CU module device HW:ID support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: rh_call_control tbuf potential future overflow fix
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RTL8192CU module device HW:ID support
  • From: srenaud20@xxxxxxx
• RE: [PATCH v3] usb: rh_call_control tbuf potential future overflow fix
  • From: "Stalley, Sean" <sean.stalley@xxxxxxxxx>
• [PATCH] usb: host: add Kconfig option for EHSET
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• RE: [PATCH 2/3] staging: dwc2: add NAK holdoff patch from downstream Pi kernel
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ACPI / PCI: don't allow PCI devices without irq to be enabled
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [PATCH 2/4] staging: ozwpan: Increment port number for new device.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""
  • From: Peter Wu <lekensteyn@xxxxxxxxx>
• [RFC 2/3] xhci: trace debug messages related to driver initialization and unload
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC 3/3] xhci: trace debug statements related to ring expansion
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• [RFC 1/3] xhci: trace debug statements for urb cancellation
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• Re: patch "usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET" added to usb tree
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] ACPI / PCI: don't allow PCI devices without irq to be enabled
  • From: Yinghai Lu <yinghai@xxxxxxxxxx>
• Re: patch "usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET" added to usb tree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: add usb_clk for transition to common clk framework
  • From: boris brezillon <b.brezillon@xxxxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: add usb_clk for transition to common clk framework
  • From: boris brezillon <b.brezillon@xxxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 0/2] USB port power off bug fixes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3] usb: rh_call_control tbuf potential future overflow fix
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] USB: OHCI: make ohci-nxp a separate driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH V5 4/6] USB: OHCI: make ohci-spear a separate driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/2] USB: OHCI: make ohci-ep93xx a separate driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH V2] USB: EHCI: make ehci-w90X900 a separate driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] Documentation sysfs-bus-usb: Document all files used by libusb
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] usb: config->desc.bLength may not exceed amount of data returned by the device
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] usb: musb: dsps: make it depend on OF_IRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 0/5] USB: HCD/EHCI: giveback of URB in tasklet context
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: Commit 09fc7d22b0 (usb: musb: fix incorrect usage of resource pointer) questions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] staging: dwc2: add microframe scheduler from downstream Pi kernel
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 3/3] staging: dwc2: add microframe scheduler from downstream Pi kernel
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 11/11] usb: misc: usb3503: Support operation with no I2C control
  • From: Dongjin Kim <tobetter@xxxxxxxxx>
• [PATCH v3] usb: rh_call_control tbuf overflow fix
  • From: "Sean O. Stalley" <sean.stalley@xxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: add usb_clk for transition to common clk framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget/composite : Avoid crash with bad gadget drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: core: clarify usb-phy array binding
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: DWC3 role switch cause IRQ request failed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] USB-Serial: Fix error handling of usb_wwan
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] USB-Serial: Fix error handling of usb_wwan
  • From: Matt Burtch <matt@xxxxxxxxxxxx>
• Re: [alsa-devel] Buffer size for ALSA USB PCM audio
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: xhci: Disable runtime PM suspend for quirky controllers.
  • From: Shawn Nematbakhsh <shawnn@xxxxxxxxxxxx>
• [PATCH] wusbcore: clean up list locking in urb enqueue
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: [3.8-rc3 -> 3.8-rc4 regression] Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [alsa-devel] Buffer size for ALSA USB PCM audio
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [alsa-devel] Buffer size for ALSA USB PCM audio
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: dealing with enclosures that don't handle READ_CAPACITY10
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: dealing with enclosures that don't handle READ_CAPACITY10
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: Add UDC driver for Aeroflex Gaisler GRUSBDC
  • From: Andreas Larsson <andreas@xxxxxxxxxxx>
• Re: [PATCH v2] USB: ohci-at91: add usb_clk for transition to common clk framework
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] usb: gadget: at91_udc: add usb_clk for transition to common clk framework
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 2/2] USB: chipidea: i.MX: simplify usbmisc
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: chipidea: i.MX: remove unused define
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [alsa-devel] Buffer size for ALSA USB PCM audio
  • From: Takashi Iwai <tiwai@xxxxxxx>
• dealing with enclosures that don't handle READ_CAPACITY10
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] dwc3: dwc3-pci: Use SIMPLE_DEV_PM_OPS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3 0/6] USB tree changes for Tegra30 and Tegra114 USB Host support
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 1/6] usb: host: add has_tdi_phy_lpm capability bit
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 3/6] usb: phy: tegra: Tegra30 support
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 2/6] usb: phy: tegra: Fix wrong PHY parameters
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 5/6] usb: phy: tegra: Program new PHY parameters
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 4/6] Documentation: New DT parameters for tegra30-usb-phy
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v3 6/6] usb: host: tegra: Tegra30 support
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH] usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  • From: Takashi Iwai <tiwai@xxxxxxx>
• kernel Oops: 0003 on usbhid_submit_report
  • From: Andreas Lillebø Holm <andreas@xxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH 1/2] USB: chipidea: i.MX: remove unused define
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] USB: chipidea: i.MX: simplify usbmisc
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] USB chipidea i.MX: Fix module loading
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 3/6] usb: phy: msm: Migrate to Managed Device Resource allocation
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 3/3] staging: dwc2: add microframe scheduler from downstream Pi kernel
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 03/13] staging: dwc2: unshift non-bool register value constants
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH 0/3] staging: dwc2: 2nd try at uframe scheduler patch
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH 3/3] staging: dwc2: add microframe scheduler from downstream Pi kernel
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH 2/3] staging: dwc2: add NAK holdoff patch from downstream Pi kernel
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH] usb: chipidea: enable to build host support as module
  • From: Luka Perkov <luka@xxxxxxxxxxx>
• [3.8-rc3 -> 3.8-rc4 regression] Re: [PATCH] module, async: async_synchronize_full() on module init iff async is used
  • From: Jonathan Nieder <jrnieder@xxxxxxxxx>
• Re: [PATCH V5 4/6] USB: OHCI: make ohci-spear a separate driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH V5 6/6] USB: OHCI: make ohci-s3c2410 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V5 5/6] USB: OHCI: make ohci-at91 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• Re: Linux USB power delivery
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• [PATCH V5 4/6] USB: OHCI: make ohci-spear a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V5 2/6] USB: OHCI: make ohci-omap a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V5 3/6] USB: OHCI: make ohci-omap3 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V5 1/6] USB: OHCI: make ohci-exynos a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• Bug report: 045e:0721 Microsoft LifeCam NX-3000 not detected
  • From: Jürgen Liebmann <info@xxxxxxxxxxxxx>
• [PATCH v15 13/13] usb: chipidea: udc: .pullup is valid only when vbus is there
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 12/13] usb: chipidea: retire flag CI_HDRC_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 11/13] usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 10/13] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 09/13] usb: chipidea: add vbus interrupt handler
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 08/13] usb: chipidea: move otg related things to otg file
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 07/13] usb: chipidea: disable all interrupts and clear all interrupts status
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 06/13] usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 05/13] usb: chipidea: Add role init and destroy APIs
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 04/13] usb: chipidea: otg: Add otg file used to access otgsc
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 03/13] usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 01/13] usb: chipidea: move vbus regulator operation to core
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 02/13] usb: chipidea: host: add vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v15 00/13] Add tested id switch and vbus connect detect support for Chipidea
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb-gadget-audio-file-wake-up-sleep-thread
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: enable to build host support as module
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: The USB Driver Appears to be Looping,
  • From: "Christopher M. Penalver" <christopher.m.penalver@xxxxxxxxx>
• Re: The USB Driver Appears to be Looping
  • From: "Thomas D. Dean" <tomdean@xxxxxxxxxxxxx>
• Re: [PATCH] usb: misc: Fix swapped properties in usb3503 DT parsing
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: The USB Driver Appears to be Looping
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Non-enumerable devices on USB and other enumerable buses
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• The USB Driver Appears to be Looping
  • From: "Thomas D. Dean" <tomdean@xxxxxxxxxxxxx>
• Re: Commit 09fc7d22b0 (usb: musb: fix incorrect usage of resource pointer) questions
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] davinci: fix resources passed to MUSB driver for DM6467
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] staging: dwc2: add microframe scheduler from downstream Pi kernel
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 2/3] staging: dwc2: add NAK holdoff patch from downstream Pi kernel
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 1/3] staging: dwc2: reorder some kernel doc comments and struct members
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 0/3] staging: dwc2: 2nd try at uframe scheduler patch
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Non-enumerable devices on USB and other enumerable buses
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: New USB Modem (using option driver new_id)
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• New USB Modem (using option driver new_id)
  • From: Alif <alifma@xxxxxxxxxxx>
• [PATCH 2/4] USB: usbtmc: fix big-endian probe of Rigol devices
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 4/4] USB: ti_usb_3410_5052: fix big-endian firmware handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 3/4] USB: adutux: fix big-endian device-type reporting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 1/4] USB: mos7840: fix big-endian probe
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 0/4] USB: fixes for v3.11
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH] usb: phy: nop: Defer clock prepare until PHY init
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] usb: chipidea: enable to build host support as module
  • From: Luka Perkov <luka@xxxxxxxxxxx>
• [PATCH] usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  • From: "Maksim A. Boyko" <maksboyko@xxxxxxxxx>
• Re: Commit 09fc7d22b0 (usb: musb: fix incorrect usage of resource pointer) questions
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Bug 60699 - Stalled state of endpoint will not be cleared
  • From: Florian Wolter <wolly84@xxxxxx>
• Re: [PATCH v2 0/4] Add phy support for AM335X platform using Generic PHy framework
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4 6/6] USB: OHCI: make ohci-s3c2410 a separate driver
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: device failing to enumerate with XHCI
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  • From: "Maksim A. Boyko" <maksboyko@xxxxxxxxx>
• [PATCH V2] USB: OHCI: make ohci-nxp a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V3 2/2] USB: OHCI: make ohci-pxa27x a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V3 1/2] USB: OHCI: make ohci-ep93xx a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• Re: [PATCH] net/usb: rtl8150: allocate URB transfer_buffer and setup_packet separately
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• [PATCH V4 6/6] USB: OHCI: make ohci-s3c2410 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 5/6] USB: OHCI: make ohci-at91 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 4/6] USB: OHCI: make ohci-spear a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 3/6] USB: OHCI: make ohci-omap3 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 2/6] USB: OHCI: make ohci-omap a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V4 1/6] USB: OHCI: make ohci-exynos a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH V2] USB: EHCI: make ehci-w90X900 a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• Re: [PATCH 1/2] net/usb: catc: allocate URB setup_packet as separate buffer
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• Re: FUSB200 xhci issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• RE: [RFC v3] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v4] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxxxxxxxx>
• [PATCH v2] usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO out side of the ifs.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO out side of the ifs.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• RE: [RFC v3] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: "Yates, Alexandra" <alexandra.yates@xxxxxxxxx>
• [GIT PATCH] USB fixes for 3.11-rc5
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v3] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: 3.10.4: kmemleak in usb_get_bos_descriptor()?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: device failing to enumerate with XHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] USB & USBNET: loose SG check and support usbnet DMA SG
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] USB & USBNET: loose SG check and support usbnet DMA SG
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] net/usb: catc: allocate URB setup_packet as separate buffer
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Usb devices become invisible after a few plug/unplug of webcams
  • From: Lionel Landwerlin <lionel.g.landwerlin@xxxxxxxxxxxxxxx>
• Re: Linux USB power delivery
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [RFC v3] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: "Yates, Alexandra" <alexandra.yates@xxxxxxxxx>
• Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC v3] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] wusbcore: fix kernel panic when disconnecting a wireless USB->serial device
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: 3.10.4: kmemleak in usb_get_bos_descriptor()?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC v3] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxxxxxxxx>
• [RFC v3] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxxxxxxxx>
• Re: [PATCH] wusbcore: fix kernel panic when disconnecting a wireless USB->serial device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Can't mount external (USB) HDD with Kernel 3.10.3
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] net/usb: rtl8150: allocate URB transfer_buffer and setup_packet separately
  • From: Petko Manolov <petkan@xxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: clarify usb-phy array binding
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• [PATCH] usb: gadget/composite : Avoid crash with bad gadget drivers
  • From: Philippe De Swert <philippe.deswert@xxxxxxxxxxxxxxx>
• Re: [RFC V3] usb: rh_call_control tbuf overflow fix
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Usb devices become invisible after a few plug/unplug of webcams
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Can't mount external (USB) HDD with Kernel 3.10.3
  • From: Alberto Gonzalez <alberto6674@xxxxxxxxx>
• Re: [PATCH 2/2] net: asix: Move declaration of ax88172a_info to shared header
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: asix: Move declaration of ax88172a_info to shared header
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 2/2] net: asix: Move declaration of ax88172a_info to shared header
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH 2/2] net: asix: Move declaration of ax88172a_info to shared header
  • From: Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: asix: Move declaration of ax88172a_info to shared header
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 1/2] net: asix: Staticise non-exported symbols
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] net: asix: Move declaration of ax88172a_info to shared header
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] usb: xhci: Disable runtime PM suspend for quirky controllers.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [RFC V3] usb: rh_call_control tbuf overflow fix
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC v2] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: "Yates, Alexandra" <alexandra.yates@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: clarify usb-phy array binding
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• RE: [RFC V3] usb: rh_call_control tbuf overflow fix
  • From: "Ismail, Abdul R" <abdul.r.ismail@xxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC V3] usb: rh_call_control tbuf overflow fix
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: core: clarify usb-phy array binding
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• Re: [PATCH] dwc3: Only build debugfs when DWC3_GADGET/DUAL_ROLE is enabled
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• RE: DWC3 role switch cause IRQ request failed
  • From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
• Re: [RFC PATCH v2 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] usb: phy: nop: Prepare clocks as well as enabling them
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] usb: host: delete chipidea dependency
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] wusbcore: fix kernel panic when disconnecting a wireless USB->serial device
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL FOR v3.12] UVC gadget fix
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] usb: host: delete chipidea dependency
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: nop: Prepare clocks as well as enabling them
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: host: delete chipidea dependency
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• ath9k_htc firmware problem [was: Re: FUSB200 xhci issue]
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL, FOR LINUX-OMAP] usb: nop phy rename
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] HWA RC: fix a kernel panic when unplugging the HWA dongle
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: [PATCH 5/5] usb/musb dma: add cppi41 dma driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC V3] usb: rh_call_control tbuf overflow fix
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v14 11/12] usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [GIT PULL FOR v3.12] UVC gadget fix
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: DWC3 role switch cause IRQ request failed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v14 11/12] usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] usb: host: tegra: Tegra30 support
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: DWC3 role switch cause IRQ request failed
  • From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
• Re: [RFC PATCH v2 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Linux USB power delivery
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: DWC3 Dule Role setting cause dwc3 device driver request IRQ failed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: DWC3 role switch cause IRQ request failed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFT] xhci-plat: Don't enable legacy PCI interrupts.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v14 11/12] usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v14 06/12] usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] dwc3: Only build debugfs when DWC3_GADGET/DUAL_ROLE is enabled
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Commit 09fc7d22b0 (usb: musb: fix incorrect usage of resource pointer) questions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v14 04/12] usb: chipidea: otg: Add otg file used to access otgsc
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v14 08/12] usb: chipidea: move otg relate things to otg file
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v14 06/12] usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v14 04/12] usb: chipidea: otg: Add otg file used to access otgsc
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v14 06/12] usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: chipidea: i.MX: simplify usbmisc
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: chipidea: i.MX: simplify usbmisc
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] arm: dts: imx: Delete usbmisc_imx
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Usb devices become invisible after a few plug/unplug of webcams
  • From: Lionel Landwerlin <lionel.g.landwerlin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] chipidea: Remove previous MODULE_ALIAS
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] usb: chipidea: improve kconfig 2.0
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: host: delete chipidea dependency
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH 10/11] usb: misc: usb3503: Don't specify all DT properties as required
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 07/11] usb: misc: usb3503: Fix typos in error messages
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 11/11] usb: misc: usb3503: Support operation with no I2C control
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 03/11] usb: misc: usb3503: Convert to devm_ APIs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 05/11] usb: misc: usb3503: Convert to regmap
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 06/11] usb: misc: usb3503: Factor out I2C probe
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 08/11] usb: misc: usb3503: Default to hub mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 09/11] usb: misc: usb3503: Add USB3503A to the compatible list
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 04/11] usb: misc: usb3503: Actively manage Hub Connect GPIO
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 02/11] usb: misc: usb3503: Use gpio_set_value_cansleep()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 01/11] usb: misc: usb3503: Fix swapped properties in DT parsing
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: delete the dead code
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] chipidea: core: Move hw_phymode_configure() into probe
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: isp1760: avoid to flush_dcache_page on slab page
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• [RFC PATCH v2 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [RFC PATCH v2 0/3] DWC3 USB support for Qualcomm platform
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [RFC PATCH v2 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH] chipidea: core: Move hw_phymode_configure() into probe
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH] chipidea: core: Move hw_phymode_configure() into probe
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  • From: Maxim Boyko <boyko@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  • From: Maxim Boyko <boyko@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] Moxa UPort firmware
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  • From: "Maksim A. Boyko" <maksim.a.boyko@xxxxxxxxx>
• RE: [PATCH][bugfix] usb/gadget: configfs: keep a function if it is not successfully added
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PULL] Moxa UPort firmware
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 2/2] USB: chipidea: i.MX: simplify usbmisc
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] USB chipidea i.MX: Fix module loading
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] USB: chipidea: i.MX: remove unused define
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] arm: dts: imx: Delete usbmisc_imx
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• RE: xHCI ISR be registered twice
  • From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
• RE: [PULL] Moxa UPort firmware
  • From: Danny Lin (林政易) <danny.lin@xxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Sujith Manoharan <sujith@xxxxxxxxxxx>
• Re: [PATCH 1/3 v5] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• RE: [RFT] xhci-plat: Don't enable legacy PCI interrupts.
  • From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
• Re: [PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] USBNET: ax88179_178a: enable tso if usb host supports sg dma
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH] usb: isp1760: avoid to flush_dcache_page on slab page
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [RFC v2] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC v2] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxxxxxxxx>
• [RFC v2] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] USBNET: ax88179_178a: enable tso if usb host supports sg dma
  • From: Grant Grundler <grundler@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] USBNET: ax88179_178a: enable tso if usb host supports sg dma
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v3] usb: rh_call_control tbuf overflow fix
  • From: "Sean O. Stalley" <sean.stalley@xxxxxxxxx>
• RE: [RFC V3] usb: rh_call_control tbuf overflow fix
  • From: "Stalley, Sean" <sean.stalley@xxxxxxxxx>
• Re: [RFC V3] usb: rh_call_control tbuf overflow fix
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC V3] usb: rh_call_control tbuf overflow fix
  • From: "Sean O. Stalley" <sean.stalley@xxxxxxxxx>
• RE: [PATCH] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: "Yates, Alexandra" <alexandra.yates@xxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3 v5] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: 'Siano Mobile Silicon' firmware doesn't load in 3.10.x
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxx>
• [PATCH] RFC - xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxx>
• Re: [PULL] Moxa UPort firmware
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: [RFC V2] usb: rh_call_control tbuf overflow fix
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC V2] usb: rh_call_control tbuf overflow fix
  • From: "Sean O. Stalley" <sean.stalley@xxxxxxxxx>
• [PATCH v2] HWA: avoid constant suspend and resume on the root hub
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• 3.10.4: kmemleak in usb_get_bos_descriptor()?
  • From: Martin MOKREJŠ <mmokrejs@xxxxxxxxx>
• Re: [PATCH] HWA: avoid constant suspend and resume on the root hub
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] net/usb: rtl8150: allocate URB transfer_buffer and setup_packet separately
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• [PATCH] HWA: avoid constant suspend and resume on the root hub
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3 v5] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• [RFT] xhci-plat: Don't enable legacy PCI interrupts.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] USBNET: ax88179_178a: enable tso if usb host supports sg dma
  • From: Grant Grundler <grundler@xxxxxxxxxx>
• [PATCH] wusbcore: fix root hub hub_status_data to only return > 0 if status has actually changed
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: xHCI ISR be registered twice
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] USB: introduce usb_device_no_sg_constraint() helper
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH v4 2/4] USB: XHCI: mark no_sg_constraint
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH v4 3/4] USBNET: support DMA SG
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH][bugfix] usb/gadget: configfs: keep a function if it is not successfully added
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] USBNET: ax88179_178a: enable tso if usb host supports sg dma
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• 'Siano Mobile Silicon' firmware doesn't load in 3.10.x
  • From: mario tillmann <mario.t4man@xxxxxxxxx>
• Re: [PATCH] net/usb: rtl8150: allocate URB transfer_buffer and setup_packet separately
  • From: Petko Manolov <petkan@xxxxxxxxxxxxx>
• Re: FUSB200 xhci issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH] UWB: fix sysfs warning on HWA device unplug.
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: Linux USB power delivery
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH v4 0/4] USB & USBNET: loose SG check and support usbnet DMA SG
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v4 1/4] USB: introduce usb_device_no_sg_constraint() helper
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v4 2/4] USB: XHCI: mark no_sg_constraint
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v4 3/4] USBNET: support DMA SG
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v4 4/4] USBNET: ax88179_178a: enable tso if usb host supports sg dma
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Linux USB power delivery
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: [PATCH v2 5/5] arm: dts: imx: Delete usbmisc_imx
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH] usb: phy: nop: Prepare clocks as well as enabling them
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 5/5] arm: dts: imx: Delete usbmisc_imx
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PULL] Moxa UPort firmware
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 1/3 v5] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [PATCH v2 4/5] arm: dts: imx: add aliases for usb
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 2/5] usb: chipidea: usbmisc_imx: Using regmap to access register
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 0/5] usb: chipidea: delete usbmisc_imx
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 3/5] usb: chipidea: imx: build ci_hdrc_imx.c and usbmisc_imx.c together
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 1/5] usb: chipidea: imx: rename the DT doc name
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 5/5] arm: dts: imx: Delete usbmisc_imx
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/3 v5] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [RFC 1/2] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH 1/1] usb: chipidea: imx: delete the dead code
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH] Fix invalid volume resolution for Logitech HD Webcam C525
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH][bugfix] usb/gadget: configfs: keep a function if it is not successfully added
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH] 6fire: fix URB transfer buffer for midi output
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH] 6fire: fix URB transfer buffer for midi output
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] 6fire: fix URB transfer buffer for midi output
  • From: Takashi Iwai <tiwai@xxxxxxx>
• RE: xHCI ISR be registered twice
  • From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
• USB Gadget:how to test udc with gadget gmidi?
  • From: litong <fddllitong@xxxxxxxxx>
• [PATCH v2 2/2] lsusb: Reports devices that support BESL on USB2.0
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxx>
• [PATCH v2 1/2] lsusb: Reports if USB2.0 port is on L1 state
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxx>
• [PATCH v2 0/2] lsusb LPM support USB2.0
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxx>
• RE: [PATCH 0/2] lsusb LPM BESL support
  • From: "Yates, Alexandra" <alexandra.yates@xxxxxxxxx>
• [PATCH] usb/hcd: Log error code if reset() fails
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] usb: misc: usb3503: Convert to devm_ APIs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: VM Kernel bug with CONFIG_DEBUG_VM
  • From: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
• Re: [PATCH] Fix invalid volume resolution for Logitech HD Webcam C525
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix invalid volume resolution for Logitech HD Webcam C525
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Fix invalid volume resolution for Logitech HD Webcam C525
  • From: Бойко Максим <maksboyko@xxxxxxxxx>
• [PATCH] usb: misc: Fix swapped properties in usb3503 DT parsing
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/2] lsusb LPM BESL support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] lsusb: Reports devices that support BESL on USB2.0
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxx>
• [PATCH 1/2] lsusb: Reports if USB2.0 port is on L1 state
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxx>
• [PATCH 0/2] lsusb LPM BESL support
  • From: Alexandra Yates <alexandra.yates@xxxxxxxxx>
• Re: [PATCH 1/3 v5] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH] usb: phy: Cleanup error code in **_usb_get_phy_**() APIs
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCH] 6fire: fix URB transfer buffer for midi output
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ar5523 Gigaset USB Adapter 108 issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ar5523 Gigaset USB Adapter 108 issue
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3 v5] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCH] alauda: do not use stack for URB transfer_buffers
  • From: Jörn Engel <joern@xxxxxxxxx>
• Re: [PATCH] 6fire: fix URB transfer buffer for midi output
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 1/3 v5] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: xHCI ISR be registered twice
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net/usb: hso: allocate serial_state_notification as separate buffer
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 1/2] net/usb: hso: allocate URB setup_packets as separate buffers
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH] USB: EHCI: accept very late isochronous URBs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH] 6fire: fix DMA issues with URB transfer_buffer usage
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• Re: [alsa-devel] [PATCH] 6fire: fix DMA issues with URB transfer_buffer usage
  • From: Torsten Schenk <torsten.schenk@xxxxxxxx>
• Re: [alsa-devel] [PATCH] 6fire: fix DMA issues with URB transfer_buffer usage
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH] net/usb: rtl8150: allocate URB transfer_buffer and setup_packet separately
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• [PATCH 2/2] net/usb: pegasus: allocate URB transfer_buffers as separate buffers
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• [PATCH 1/2] net/usb: pegasus: do not use stack for URB buffers
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• [PATCH 2/2] net/usb: hso: allocate serial_state_notification as separate buffer
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• [PATCH 1/2] net/usb: hso: allocate URB setup_packets as separate buffers
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• [PATCH 2/2] net/usb: catc: allocate URB transfer_buffers as separate buffers
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• [PATCH 1/2] net/usb: catc: allocate URB setup_packet as separate buffer
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• [PATCH] usb: phy: Cleanup error code in **_usb_get_phy_**() APIs
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH] 6fire: fix DMA issues with URB transfer_buffer usage
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] dwc3: dwc3-pci: Use SIMPLE_DEV_PM_OPS
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [alsa-devel] Linux 3.10.4 and Logitech HD Webcam C525/C310
  • From: Бойко Максим <maksboyko@xxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Andy Green <andy.green@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: ar5523 Gigaset USB Adapter 108 issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: VM Kernel bug with CONFIG_DEBUG_VM
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: rx51: change musb mode to OTG
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH 1/1] usb: chipidea: imx: include usbmisc_imx.c in ci_hdrc_imx.c
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: move the "simple" drivers into usb-serial-simple.c
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] alauda: do not use stack for URB transfer_buffers
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• Re: I've now caught up on my pending USB patches
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: core: don't try to reset_device() a port that got just disconnected
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: ar5523 Gigaset USB Adapter 108 issue
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: I've now caught up on my pending USB patches
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v3 4/4] USBNET: ax88179_178a: enable tso if usb host supports sg dma
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: 045e:0745 [HP TouchSmart tm2t-2200] No scancode for several keys of Microsoft Comfort Desktop 5000
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] usb: gadget: zero: Add flexible auto remote wakeup test method
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] USB: global suspend and remote wakeup don't mix
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [RFC 0/2] USB port power off bug fixes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] USB tree changes for Tegra30 and Tegra114 USB Host support
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] usb: host: tegra: Tegra30 support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] usb: host: tegra: Tegra30 support
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• 045e:0745 [HP TouchSmart tm2t-2200] No scancode for several keys of Microsoft Comfort Desktop 5000
  • From: Ari Fogel <arifogel@xxxxxxxx>
• Re: [RFC 0/2] USB port power off bug fixes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: global suspend and remote wakeup don't mix
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 0/2] USB port power off bug fixes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] usb: host: tegra: Tegra30 support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] alauda: do not use stack for URB transfer_buffers
  • From: Jörn Engel <joern@xxxxxxxxx>
• Re: [PATCH] USB: global suspend and remote wakeup don't mix
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH v2 0/6] USB tree changes for Tegra30 and Tegra114 USB Host support
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v2 1/6] usb: host: add has_tdi_phy_lpm capability bit
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v2 2/6] usb: phy: tegra: Fix wrong PHY parameters
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v2 4/6] Documentation: New DT parameters for tegra30-usb-phy
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v2 5/6] usb: phy: tegra: Program new PHY parameters
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v2 3/6] usb: phy: tegra: Tegra30 support
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH v2 6/6] usb: host: tegra: Tegra30 support
  • From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
• [PATCH 1/3 v5] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: phy-samsung-usb: Simplify PMU register handling
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH] usb: fix some scripts/kernel-doc warnings
  • From: Yacine Belkadi <yacine.belkadi.1@xxxxxxxxx>
• [PATCH v2 7/7] pl2303: add two comments concerning the supported baud rates with HX chips
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH v2 4/7] pl2303: move the two baud rate encoding methods to separate functions
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH v2 3/7] pl2303: remove 500000 baud from the list of standard baud rates
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH v2 2/7] pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH v2 0/7] pl2303: improve the baud rate support
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH v2 5/7] pl2303: increase the allowed baud rate range for the divisor based encoding method
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH v2 6/7] pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH v2 1/7] pl2303: fix+improve the divsor based baud rate encoding method
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] USBNET: ax88179_178a: enable tso if usb host supports sg dma
  • From: Grant Grundler <grundler@xxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP: rx51: change musb mode to OTG
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 0/2] ARM: OMAP: fix USB regression on Nokia boards
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 1/2] ARM: omap2: fix musb usage for n8x0
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] USB: global suspend and remote wakeup don't mix
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: global suspend and remote wakeup don't mix
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH] usb: dwc3-pci: Ensure system sleep PM ops are defined only when used
  • From: Mark Brown <broonie@xxxxxxxxxx>