Sorry, here are more details.
I'm refering to https://bugzilla.kernel.org/show_bug.cgi?id=60738
To sum up:
Most of the time, my HP USB 3.0 hard drive will not be properly mounted
when booting or when connecting it.
I usually end up with something similar to the following in dmesg:
[ 204.081693] usb usb9: usb wakeup-resume
[ 204.081700] usb usb9: usb auto-resume
[ 204.081711] hub 9-0:1.0: hub_resume
[ 204.081722] hub 9-0:1.0: port 1: status 02c1 change 0001
[ 204.090114] usb usb8: usb wakeup-resume
[ 204.090119] usb usb8: usb auto-resume
[ 204.090131] hub 8-0:1.0: hub_resume
[ 204.090140] hub 8-0:1.0: port 1: status 0101 change 0001
[ 204.182172] hub 9-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 204.182192] hub 9-0:1.0: port 1, status 02a0, change 0001, 5.0 Gb/s
[ 204.286239] hub 9-0:1.0: debounce: port 1: total 100ms stable 100ms
status 0x2a0
[ 204.286250] hub 8-0:1.0: state 7 ports 2 chg 0002 evt 0002
[ 204.286262] hub 8-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 204.286285] hub 9-0:1.0: hub_suspend
[ 204.286291] usb usb9: bus auto-suspend, wakeup 1
[ 204.390320] hub 8-0:1.0: debounce: port 1: total 100ms stable 100ms
status 0x101
[ 204.492391] usb 8-1: new high-speed USB device number 8 using xhci_hcd
[ 204.697607] usb 8-1: Device not responding to set address.
[ 204.898877] usb 8-1: Device not responding to set address.
[ 205.099841] usb 8-1: device not accepting address 8, error -71
[ 205.099868] kobject: '8-1' (ffff88020d7fe098): kobject_cleanup
[ 205.099870] kobject: '8-1' (ffff88020d7fe098): calling ktype release
[ 205.099883] kobject: '8-1': free name
[ 205.150907] kobject: '8-1' (ffff88020a605898): kobject_cleanup
[ 205.150918] kobject: '8-1' (ffff88020a605898): calling ktype release
[ 205.150921] kobject: '8-1': free name
[ 205.150929] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 205.150939] hub 8-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
[ 205.254964] hub 8-0:1.0: debounce: port 1: total 100ms stable 100ms
status 0x100
[ 205.254978] hub 8-0:1.0: hub_suspend
[ 205.254983] usb usb8: bus auto-suspend, wakeup 1
To make it work, when the USB drive is already plugged in, if I can
disconnect it and reconnect it in the USB 3.0 port fast enough, it works
most of the time.
This problem is not seen under Windows.
According to Windows Hardware Certification Requirements (part 1):
"Next, the time between the time that RxDetect succeeds and the time
that the device enters U0 can be up to 300 ms. With an extra margin for
hub control transfers and other delays, the total comes to 500 ms."
Also, when the hard drive is plugged in a USB 2.0 port, it works like a
charm.
Are we too aggressive when we are "waking up" the device?
Alexandre Demers
On 08/13/2013 12:26 AM, Alexandre Demers wrote:
> Hi,
>
> As requested by Greg Kroah, please see bug 60738 - Summary: USB 3.0
connection delay seems to be too short for HP USB 3.0 hard drive.
>
> I'll be pleased to help you as much as possible.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
