From: Mark Brown <broonie@xxxxxxxxxx> The intn and connect GPIO properties are swapped in the code which will cause failures at runtime if these are connected, fix the code. There are currently no in-tree users of this device to check or update. Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/usb/misc/usb3503.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index cbb6b78..4e3a2d2 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -215,10 +215,10 @@ static int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id) } } - hub->gpio_intn = of_get_named_gpio(np, "connect-gpios", 0); + hub->gpio_intn = of_get_named_gpio(np, "intn-gpios", 0); if (hub->gpio_intn == -EPROBE_DEFER) return -EPROBE_DEFER; - hub->gpio_connect = of_get_named_gpio(np, "intn-gpios", 0); + hub->gpio_connect = of_get_named_gpio(np, "connect-gpios", 0); if (hub->gpio_connect == -EPROBE_DEFER) return -EPROBE_DEFER; hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0); -- 1.8.4.rc1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
