This patchset adds tested otg id switch function and vbus connect and disconnect detection for chipidea driver. And fix kinds of bugs found at chipidea drivers after enabling id and vbus detection. This patch are fully tested at imx6 sabresd and imx28evk platform by me. Besides, marek tested it on two STMP3780-based boards (not yet mainline) and two MX28-based boards. My chipidea repo: https://github.com/hzpeterchen/linux-usb.git Changes for v15: - Mark otgsc API as static line, and move them to otg.h [4/13] - Remove some redundant comments [6/13] - Fix some typos [8/13] - Retire flag CI_HDRC_PULLUP_ON_VBUS [12/13] [13/13] Changes for v14: - This patchset is based on below recent chipidea patches and newest usb-next, it can decrease rebase effort. Fabio Estevam (3): chipidea: ci_hdrc_imx: Remove unused variable 'res' chipidea: core: Move hw_phymode_configure() into probe chipidea: Remove previous MODULE_ALIAS Lothar Wabmann (3): usb: chipidea: improve kconfig 2.0 usb: chipidea: don't clobber return value of ci_role_start() usb: chipidea: ci_hdrc_imx: remove an unsolicited module_put() call from ci_hdrc_imx_remove() Peter Chen (1): usb: chipidea: fix the build error with randconfig - [Michael comments]: move vbus operation to core, and squash two vbus patches. [1/12], [2/12] - [Michael comments]: move out non vbus and non id related patches. [14/14 at v13] Chagnes for v13: - Add Tested-by: Marek Vasut <marex@xxxxxxx> - [Sascha's comments]: Add return value check for devm_regulator_get. [3/14] - [Marc's comments]: Change timeout usage at hw_wait_reg. [11/14] - [Alex's comments]: Using platdata flag to indicate dual role but not OTG controller. [7/14] Changes for v12: - Rebased greg's usb-next tree (3.10.0-rc7+) - Split more small patches for single function and fix. Peter Chen (12): usb: chipidea: move vbus regulator operation to core usb: chipidea: host: add vbus regulator control usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users usb: chipidea: otg: Add otg file used to access otgsc usb: chipidea: Add role init and destory APIs usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG usb: chipidea: disable all interrupts and clear all interrupts status usb: chipidea: move otg relate things to otg file usb: chipidea: add vbus interrupt handler usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS usb: chipidea: udc: .pullup is valid when vbus is on at CI_HDRC_PULLUP_ON_VBUS Peter Chen (13): usb: chipidea: move vbus regulator operation to core usb: chipidea: host: add vbus regulator control usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users usb: chipidea: otg: Add otg file used to access otgsc usb: chipidea: Add role init and destroy APIs usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG usb: chipidea: disable all interrupts and clear all interrupts status usb: chipidea: move otg related things to otg file usb: chipidea: add vbus interrupt handler usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS usb: chipidea: retire flag CI_HDRC_PULLUP_ON_VBUS usb: chipidea: udc: .pullup is valid only when vbus is there drivers/usb/chipidea/Makefile | 2 +- drivers/usb/chipidea/bits.h | 10 ++ drivers/usb/chipidea/ci.h | 8 ++ drivers/usb/chipidea/ci_hdrc_imx.c | 27 +----- drivers/usb/chipidea/ci_hdrc_msm.c | 1 - drivers/usb/chipidea/core.c | 183 +++++++++++++++++++++++++----------- drivers/usb/chipidea/host.c | 30 ++++++- drivers/usb/chipidea/host.h | 6 + drivers/usb/chipidea/otg.c | 120 +++++++++++++++++++++++ drivers/usb/chipidea/otg.h | 35 +++++++ drivers/usb/chipidea/udc.c | 78 ++++++++++------ drivers/usb/chipidea/udc.h | 6 + include/linux/usb/chipidea.h | 7 +- 13 files changed, 401 insertions(+), 112 deletions(-) create mode 100644 drivers/usb/chipidea/otg.c create mode 100644 drivers/usb/chipidea/otg.h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
