On Fri, Aug 09, 2013 at 04:40:32PM +0100, Kumar Gala wrote: > The binding spec wasn't clear that the order of the phandles in the > usb-phy array has meaning. Clarify this point in the binding that > it should be <USB2-HS-PHY, USB3-SS-PHY>. > > Signed-off-by: Kumar Gala <galak@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/usb/dwc3.txt | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > index 7a95c65..8a9770b 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -6,7 +6,9 @@ Required properties: > - compatible: must be "synopsys,dwc3" > - reg : Address and length of the register set for the device > - interrupts: Interrupts used by the dwc3 controller. > - - usb-phy : array of phandle for the PHY device > + - usb-phy : array of phandle for the PHY device. The first element > + in the array is expected to be a handle to the USB2/HS PHY and > + the second element is expected to be a handle to the USB3/SS PHY Just to check - it's not valid to have a USB3 phy without a USB2 phy? Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
