Linux USB Users
[Prev Page][Next Page]
- Explanation Needed
- From: Kumar Gaurav <kumargauravgupta3@xxxxxxxxx>
- Re: [PATCH 2/4] usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: octeon-usb and dwc2 in staging are for the same hw
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [Pull Request] xhci: Step 1 to fix usb-linus and usb-next.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH] usb: phy: am335x: add wakeup support
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH RESEND] clk: tegra30: Don't wait for PLL_U lock bit
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] usb: gadget: ffs: add ACM + FunctionFS configuration
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- [PATCH] dma: cpp41: make it compile with CONFIG_BUG=n
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH] usb: phy: am335x-control: make it compile with
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] usb: gadget: ffs: add ACM + FunctionFS configuration
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 2/2] usb: gadget: ffs: add ACM + FunctionFS configuration
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- [PATCH 1/2] usb: gadget: ffs: fix eth module parameters warning in pure-only config
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- [PATCH 0/2] g_ffs CDC ACM support
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: Felipe Balbi <balbi@xxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 7/8] ARM: dts: omap4: update omap-control-usb nodes
- From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
- Re: [PATCH] net: cdc_ncm: Export cdc_ncm_{tx,rx}_fixup functions for re-use
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] net: cdc_ncm: Export cdc_ncm_{tx,rx}_fixup functions for re-use
- From: Enrico Mioso <mrkiko.rs@xxxxxxxxx>
- Re: [PATCH] net: cdc_ncm: Export cdc_ncm_{tx,rx}_fixup functions for re-use
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] net: cdc_ncm: remove non-standard NCM device IDs
- From: Enrico Mioso <mrkiko.rs@xxxxxxxxx>
- [PATCH] net: huawei_cdc_ncm: Introduce new huawei_cdc_ncm driver
- From: Enrico Mioso <mrkiko.rs@xxxxxxxxx>
- [PATCH] net: cdc_ncm: Export cdc_ncm_{tx,rx}_fixup functions for re-use
- From: Enrico Mioso <mrkiko.rs@xxxxxxxxx>
- [PATCH v3 4/8] usb: phy: omap-usb3: Don't use omap_get_control_dev()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 3/8] usb: phy: omap-usb2: Don't use omap_get_control_dev()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 7/8] ARM: dts: omap4: update omap-control-usb nodes
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 8/8] ARM: dts: omap5: update omap-control-usb node
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 6/8] usb: phy: omap: get rid of omap_get_control_dev()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 5/8] usb: musb: omap2430: Don't use omap_get_control_dev()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 2/8] usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 1/8] usb: phy: omap-control: Get rid of platform data
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 0/8] phy: omap-usb: Support multiple instances and new types
- From: Roger Quadros <rogerq@xxxxxx>
- Re: octeon-usb and dwc2 in staging are for the same hw
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [patch] USB: mos7720: use GFP_ATOMIC under spinlock
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [patch] usb: chipidea: fix a NULL dereference on error
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/9] USB: phy: phy-nop: Manage RESET GPIO in the driver
- From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
- Re: linux-next: Tree for Aug 15 (usb/phy/phy-am335x-control.c)
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx
- From: Tomasz Figa <t.figa@xxxxxxxxxxx>
- [PATCH 2/2] arm: dts: dra7-evm: Add extcon dt nodes for USB ID detection
- From: George Cherian <george.cherian@xxxxxx>
- [PATCH 1/2] extcon: extcon-dra7xx: Add extcon driver for USB ID detection
- From: George Cherian <george.cherian@xxxxxx>
- [PATCH 0/2] Enable USB ID pin detection using extcon for DRA7xx
- From: George Cherian <george.cherian@xxxxxx>
- Re: [patch] USB: mos7720: use GFP_ATOMIC under spinlock
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: [PATCH 2/5] usb-core: Track if an endpoint has streams
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 2/8] usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power()
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 6/8] usb: phy: omap: get rid of omap_get_control_dev()
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH v2 6/8] usb: phy: omap: get rid of omap_get_control_dev()
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 1/8] usb: phy: omap-control: Get rid of platform data
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH net-next 4/7] r8152: adjust some duplicated code
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next 3/7] r8152: replace lockflags with flags
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next 2/7] r8152: replace void * with struct r8152 *
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next 6/7] r8152: adjust tx_bottom function
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next 7/7] r8152: add comments
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next 5/7] r8152: move some declearation of variables
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next 1/7] r8152: remove clearing the memory to zero for netdev priv
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [patch] usb: chipidea: fix a NULL dereference on error
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [RFC 2/2] xhci: refactor handle_cmd_completion() switch into separate function
- From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
- [RFC 1/2] xhci: remove unused argument from xhci_giveback_urb_in_irq()
- From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
- [PATCH 2/3] usb: dwc3: exynos: nop_usb_xceiv should be selected for dwc3-exynos
- From: Huang Rui <ray.huang@xxxxxxx>
- [PATCH 1/3] usb: dwc3: pci: nop_usb_xceiv should be selected for dwc3-pci
- From: Huang Rui <ray.huang@xxxxxxx>
- [PATCH 3/3] usb: dwc3: omap: omap_usb3 should be selected for dwc3-omap
- From: Huang Rui <ray.huang@xxxxxxx>
- [PATCH 0/3] usb: dwc3: PHY should be selected when glue is enabled
- From: Huang Rui <ray.huang@xxxxxxx>
- [patch] USB: mos7720: use GFP_ATOMIC under spinlock
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 0/2] ARM: OMAP: fix USB regression on Nokia boards
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH net-next v2 1/3] net/usb/r8152: support aggregation
- From: Francois Romieu <romieu@xxxxxxxxxxxxx>
- RE: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
- Re: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
- RE: [PATCH net-next v2 1/3] net/usb/r8152: support aggregation
- From: hayeswang <hayeswang@xxxxxxxxxxx>
- Re: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: About the hibernation feature implementation in dwc3 driver
- From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
- RE: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
- [GIT PATCH] USB fixes for 3.11-rc6
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [Pull Request] xhci: Step 1 to fix usb-linus and usb-next.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] usb: Don't fail port power resume on device disconnect.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [Pull Request] xhci: Step 1 to fix usb-linus and usb-next.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [Pull Request] xhci: Step 2 to fix usb-linus and usb-next.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC 0/2] USB port power off bug fixes
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC 0/2] USB port power off bug fixes
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/4] usb: Don't fail port power resume on device disconnect.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 1/4] USB: handle LPM errors during device suspend correctly
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [Pull Request] xhci: Step 2 to fix usb-linus and usb-next.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 4/4] xhci-plat: Don't enable legacy PCI interrupts.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 2/4] usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [Pull Request] xhci: Step 1 to fix usb-linus and usb-next.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFC 0/2] USB port power off bug fixes
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: RTL8192CU module device HW:ID support
- Re: [Pull Request] xhci: Platform updates, 64-bit DMA, and trace events for 3.12.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] USB: WUSBCORE: resource init and free cleanups
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] USB: WUSBCORE: resource init and free cleanups
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Peter Hyman <pete@xxxxxxxxxxxxxx>
- [PATCH] Documentation: document all g_serial module parameters
- From: Matt Porter <matt.porter@xxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC 0/5] usbfs: Add support for bulk streams
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [PATCH] i2c-tiny-usb: do not use stack as URB transfer_buffer
- From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
- [PATCH 3/3] USB: WUSBCORE: Use usb_init_urb instead of creating the URB manually
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- [PATCH 2/3] USB: WUSBCORE: fix leak of urb in wa_xfer_destroy.
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- [PATCH 1/3] USB: WUSBCORE: fix resource cleanup in error path in __wa_xfer_setup_segs
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- [PATCH 0/3] USB: WUSBCORE: resource init and free cleanups
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 0/2] ARM: OMAP: fix USB regression on Nokia boards
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- RE: About the hibernation feature implementation in dwc3 driver
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: [PATCH] i2c-tiny-usb: do not use stack as URB transfer_buffer
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2] USB: WUSBCORE: clear RPIPE stall for control endpoints
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- [Bug 60746] 3.10.4: xhci_hcd 0000:0b:00.0: Refused to change power state, currently in D3
- From: Martin MOKREJŠ <mmokrejs@xxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: linux-next: Tree for Aug 15 (usb/phy/phy-am335x-control.c)
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- Re: [PATCH v2 6/8] usb: phy: omap: get rid of omap_get_control_dev()
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/8] usb: phy: omap-control: Get rid of platform data
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 12/14] xhci: trace debug messages related to driver initialization and unload
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 09/14] xhci: add xhci_address_ctx trace event
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 14/14] xhci: fix dma mask setup in xhci.c
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 13/14] xhci: trace debug statements related to ring expansion
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 11/14] xhci: trace debug statements for urb cancellation
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 10/14] xhci: add xhci_cmd_completion trace event
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 06/14] xhci: add trace for debug messages related to changing contexts
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 08/14] xhci: add trace for debug messages related to endpoint reset
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 05/14] xhci: add traces for debug messages in xhci_address_device()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 07/14] xhci: add trace for debug messages related to quirks
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 04/14] xhci: remove CONFIG_USB_XHCI_HCD_DEBUGGING and unused code
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 03/14] xhci: replace printk(KERN_DEBUG ...)
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 02/14] xhci: replace xhci_info() with xhci_dbg()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 01/14] usb: Add Device Tree support to XHCI Platform driver
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [Pull Request] xhci: Platform updates, 64-bit DMA, and trace events for 3.12.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [alsa-devel] Buffer size for ALSA USB PCM audio
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] usb-core: Track if an endpoint has streams
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Peter Hyman <pete@xxxxxxxxxxxxxx>
- [PATCH 4/4] usb: musb: only remove host/udc if it has been added
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 1/4] usb: usb: dsps: update code according to the binding document
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 3/4] usb: musb: am335x: Do not remove the session bit HOST-only mode
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 2/4] usb: musb: am335x: add second port to beagle bone
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- musb: am335x final dts fixes + session bit
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: usb: dsps: update code to reflect recent binding changes
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/8] usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power()
- From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
- [PATCH v2 8/8] ARM: dts: omap5: update omap-control-usb node
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 3/8] usb: phy: omap-usb2: Don't use omap_get_control_dev()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 2/8] usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 7/8] ARM: dts: omap4: update omap-control-usb nodes
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 5/8] usb: musb: omap2430: Don't use omap_get_control_dev()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 6/8] usb: phy: omap: get rid of omap_get_control_dev()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 4/8] usb: phy: omap-usb3: Don't use omap_get_control_dev()
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 1/8] usb: phy: omap-control: Get rid of platform data
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 0/8] phy: omap-usb: Support multiple instances and new types
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 3/3] usb: usb: dsps: update code to reflect recent binding changes
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 2/3] usb: usb: dsps: update device tree bindings
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 1/3] of: add vendor prefix for Mentor Graphics
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH net-next v2 1/3] net/usb/r8152: support aggregation
- From: Francois Romieu <romieu@xxxxxxxxxxxxx>
- [PATCH 1/2] staging: ozwpan: Remove unneeded variable initializer
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 2/2] staging: ozwpan: Remove extra variable.
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: USB for Tegra114 Dalmore
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [RFC 0/5] usbfs: Add support for bulk streams
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] usb: usb: dsps: update device tree bindings
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH v2 8/9] ARM: dts: omap3-beagle: Make USB host pin naming consistent
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 0/9] USB: phy: phy-nop: Manage RESET GPIO in the driver
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 4/9] ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 2/9] usb: phy: nop: Don't use regulator framework for RESET line
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 9/9] ARM: dts: omap3-beagle-xm: Add USB Host support
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 3/9] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 7/9] ARM: dts: omap5-uevm: Use reset-gpios for hsusb2_reset
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 6/9] ARM: dts: omap4-panda: Use reset-gpios for hsusb1_reset
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 5/9] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v2 1/9] usb: phy: nop: Add gpio_reset to platform data
- From: Roger Quadros <rogerq@xxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Peter Hyman <pete@xxxxxxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH 2/9] usb: phy: nop: Don't use regulator framework for RESET line
- From: Roger Quadros <rogerq@xxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Peter Hyman <pete@xxxxxxxxxxxxxx>
- Re: [PATCH net-next v2 1/3] net/usb/r8152: support aggregation
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH net-next v2 2/3] net/usb/r8152: enable tx checksum
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH net-next v2 3/3] net/usb/r8152: enable interrupt transfer
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: kernel Oops: 0003 on usbhid_submit_report
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: PCIe USB 3.0 card not working with kernel 3.9 and 3.10
- From: Huang Rui <ray.huang@xxxxxxx>
- RE: About the hibernation feature implementation in dwc3 driver
- From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
- Re: [alsa-devel] Buffer size for ALSA USB PCM audio
- From: Eldad Zack <eldad@xxxxxxxxxxxxxxx>
- Re: Bug 60738 - USB 3.0 connection delay seems to be too short for HP USB 3.0 hard drive
- From: Alexandre Demers <alexandre.f.demers@xxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] usb: misc: usb3503: Force late initialization
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [PATCH] usb: gadget/composite : Avoid crash with bad gadget drivers
- From: Philippe De Swert <philippe.deswert@xxxxxxxxxxxxxxx>
- [PATCH v5] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
- From: Alexandra Yates <alexandra.yates@xxxxxxxxxxxxxxx>
- Re: [RFC v3] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
- From: "Alexandra Yates" <alexandra.yates@xxxxxxxxxxxxxxx>
- Re: [PATCH 07/10] staging: ozwpan: Make oz_hcd_pd_departed() take a struct pointer.
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 0/7] USB: fixes for v3.11 (and v3.12)
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: Non-enumerable devices on USB and other enumerable buses
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- [PATCH RESEND] Clock changes for Tegra30 USB Host support
- From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
- [PATCH RESEND] clk: tegra30: Don't wait for PLL_U lock bit
- From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
- Re: [PATCH] usb: misc: usb3503: Force late initialization
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: misc: usb3503: Force late initialization
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 08/22] usb: chipidea: remove previous MODULE_ALIAS
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Documentation sysfs-bus-usb: Document all files used by libusb
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Documentation sysfs-bus-usb: Document all files used by libusb
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: misc: usb3503: Force late initialization
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- Re: [PATCH] usb: misc: usb3503: Force late initialization
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Peter Hyman <pete@xxxxxxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Peter Hyman <pete@xxxxxxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH 1/2] usb: usb: dsps: update device tree bindings
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] Buffer size for ALSA USB PCM audio
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Dynamic debug on by default?
- From: Jason Baron <jbaron@xxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Peter Hyman <pete@xxxxxxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Peter Hyman <pete@xxxxxxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH] usb: misc: usb3503: Force late initialization
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: dwc3: core: cope with NULL pdata
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC 0/5] usbfs: Add support for bulk streams
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: core: cope with NULL pdata
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH v2 3/3] pl2303: improve the chip type detection/distinction
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
- [PATCH v2 2/3] pl2303: improve the chip type information output on startup
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
- [PATCH v2 1/3] pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
- [PATCH v2 0/3] pl2303: improve the chip type distinction
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
- Re: I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: usb: dsps: update device tree bindings
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: Dynamic debug on by default?
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: usb: dsps: update device tree bindings
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- I: Sierra.c USB Serial Driver FAQ/Feature Request
- From: Peter Hyman <pete@xxxxxxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 2/2] usb: musb: dsps fix the typo in reg-names of the dma node
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 1/2] usb: usb: dsps: update device tree bindings
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- am335x / dsps: DT binding updates
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: Dynamic debug on by default?
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
- From: Jack Pham <jackp@xxxxxxxxxxxxxx>
- Re: Dynamic debug on by default?
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Dynamic debug on by default?
- From: Joe Perches <joe@xxxxxxxxxxx>
- Dynamic debug on by default?
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: RTL8192CU module device HW:ID support
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/9] usb: phy: nop: Don't use regulator framework for RESET line
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: RTL8192CU module device HW:ID support
- Re: [PATCH 01/15] drivers: phy: add generic PHY framework
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v3 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB suspend/resume sequence
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
- From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
- Re: USB suspend/resume sequence
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] USB patches for v3.12 merge window
- From: Felipe Balbi <balbi@xxxxxx>
- Re: 3.10.4: kmemleak in usb_get_bos_descriptor()?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: core: cope with NULL pdata
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 2/9] usb: phy: nop: Don't use regulator framework for RESET line
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 9/9] ARM: dts: omap3-beagle-xm: Add USB Host support
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 4/9] ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 1/9] usb: phy: nop: Add gpio_reset to platform data
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 6/9] ARM: dts: omap4-panda: Use reset-gpios for hsusb1_reset
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 8/9] ARM: dts: omap3-beagle: Make USB host pin naming consistent
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 7/9] ARM: dts: omap5-uevm: Use reset-gpios for hsusb2_reset
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 5/9] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 3/9] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 0/9] USB: phy: phy-nop: Manage RESET GPIO in the driver
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 0/1] Documentation sysfs-bus-usb: Document all files used by libusb v4
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH] Documentation sysfs-bus-usb: Document all files used by libusb
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: kernel Oops: 0003 on usbhid_submit_report
- From: Andreas Lillebø Holm <andreas@xxxxxxxxxx>
- Re: [PATCH] Documentation sysfs-bus-usb: Document all files used by libusb
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH v3 0/3] DWC3 USB support for Qualcomm platform
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH v3 1/3] usb: dwc3: msm: Add device tree binding information
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH v3 3/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH net-next v2 1/3] net/usb/r8152: support aggregation
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next v2 2/3] net/usb/r8152: enable tx checksum
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next v2 3/3] net/usb/r8152: enable interrupt transfer
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Bin Liu <binmlist@xxxxxxxxx>
- [PATCH 5/5] usbfs: Add support for allocating / freeing streams
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 4/5] usbfs: Add ep_to_host_endpoint helper function
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 2/5] usb-core: Track if an endpoint has streams
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 3/5] usbfs: Add support for bulk stream ids
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 1/5] usbfs: proc_do_submiturb use a local variable for number_of_packets
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [RFC 0/5] usbfs: Add support for bulk streams
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: Non-enumerable devices on USB and other enumerable buses
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: USB suspend/resume sequence
- From: Oliver Neukum <oneukum@xxxxxxx>
- [PATCH] usb: misc: usb3503: Force late initialization
- From: Tushar Behera <tushar.behera@xxxxxxxxxx>
- Re: [PATCH v2 0/4] Add phy support for AM335X platform using Generic PHy framework
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- PCIe USB 3.0 card not working with kernel 3.9 and 3.10
- From: Italo Madalozo <italo.madalozo@xxxxxxxxx>
- Re: [PATCH] Documentation sysfs-bus-usb: Document all files used by libusb
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: [PATCH 2/2] USB: chipidea: i.MX: simplify usbmisc
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- Re: [PATCH] dwc3: dwc3-pci: Use SIMPLE_DEV_PM_OPS
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v15 00/13] Add tested id switch and vbus connect detect support for Chipidea
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 18/22] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 22/22] USB: chipidea: i.MX: simplify usbmisc
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 21/22] usb: chipidea: udc: .pullup is valid only when vbus is there
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 20/22] usb: chipidea: retire flag CI_HDRC_PULLUP_ON_VBUS
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 19/22] usb: chipidea: udc: fix misuse of REGS_SHARED and PULLUP_ON_VBUS flags
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 17/22] usb: chipidea: add vbus interrupt handler
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 16/22] usb: chipidea: move otg related things to otg file
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 11/22] usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 15/22] usb: chipidea: disable all interrupts and clear all interrupts status
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 14/22] usb: chipidea: add flag CI_HDRC_DUAL_ROLE_NOT_OTG
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 13/22] usb: chipidea: add role init and destroy APIs
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 12/22] usb: chipidea: otg: add otg file used to access otgsc
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 10/22] usb: chipidea: host: add vbus regulator control
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 09/22] usb: chipidea: move vbus regulator operation to core
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 08/22] usb: chipidea: remove previous MODULE_ALIAS
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 07/22] usb: chipidea: prevent endless loop registering platform_devices when probe fails
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 06/22] usb: chipidea: don't clobber return value of ci_role_start()
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 05/22] usb: chipidea: ci_hdrc_imx: remove an unsolicited module_put() call from ci_hdrc_imx_remove()
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 04/22] usb: chipidea: improve kconfig 2.0
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 03/22] usb: chipidea: imx: delete the dead code
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 01/22] usb: chipidea: ci_hdrc_imx: remove unused variable 'res'
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 02/22] usb: chipidea: move hw_phymode_configure() into probe
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- [PATCH 00/22] usb: chipidea: updates for v3.12
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- Re: [PATCH 1/6] usb: phy-nop: Use RESET Controller for managing the reset line
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC 2/2] usb: dwc3: Add Qualcomm DWC3 glue layer driver
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH 0/29] simplify use of devm_ioremap_resource
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- [PATCH] Documentation sysfs-bus-usb: Document all files used by libusb
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 0/1] Documentation sysfs-bus-usb: Document all files used by libusb v3
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: USB suspend/resume sequence
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- [PATCH 29/29] usb: dwc3: omap: simplify use of devm_ioremap_resource
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- Re: [PATCH 6/7] ARM: dts: omap4: update omap-control-usb nodes
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH] usb: add two quirky touchscreen
- Re: USB suspend/resume sequence
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH 6/7] ARM: dts: omap4: update omap-control-usb nodes
- From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
- Re: [GIT PULL, FOR LINUX-OMAP] usb: nop phy rename
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] xhci: Fix race between ep halt and URB cancellation
- From: Florian Wolter <wolly84@xxxxxx>
- Re: [PATCH] USB: WUSBCORE: clear RPIPE stall for control endpoints
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: USB suspend/resume sequence
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- USB suspend/resume sequence
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- Re: [PATCH 7/7] ARM: dts: omap5: update omap-control-usb node
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 6/7] ARM: dts: omap4: update omap-control-usb nodes
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 0/7] phy: omap-usb: Support multiple instances and new types
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: 3.10.4: kmemleak in usb_get_bos_descriptor()?
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- RE: About the hibernation feature implementation in dwc3 driver
- From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
- [RFC v2 3/3] xhci: trace debug statements related to ring expansion
- From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
- [RFC v2 2/3] xhci: trace debug messages related to driver initialization and unload
- From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
- [RFC v2 1/3] xhci: trace debug statements for urb cancellation
- From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
- RE: About the hibernation feature implementation in dwc3 driver
- From: "Wang, Yu Y" <yu.y.wang@xxxxxxxxx>
- RE: [PATCH net-next 1/3] net/usb/r8152: support aggregation
- From: hayeswang <hayeswang@xxxxxxxxxxx>
- [RFC v6] xhci: fix dma mask setup in xhci.c
- From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
- Re: [PATCH v15 00/13] Add tested id switch and vbus connect detect support for Chipidea
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v2] usb-gadget-audio-file-wake-up-sleep-thread
- From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
- Re: [PATCH] dwc3: dwc3-pci: Use SIMPLE_DEV_PM_OPS
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- Re: [PATCH net-next 1/3] net/usb/r8152: support aggregation
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [RFC 2/3] xhci: trace debug messages related to driver initialization and unload
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFC v5] xhci: fix dma mask setup in xhci.c
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFC v3 1/4] xhci: add trace for debug messages related to quirks
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
- From: Jack Pham <jackp@xxxxxxxxxxxxxx>
- Re: [PATCH 01/15] drivers: phy: add generic PHY framework
- From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
- Re: [PATCH 00/10] staging: ozwpan: Coding style fixes
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 10/10] staging: ozwpan: Separate success & failure case for oz_hcd_pd_arrived()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] Bug 60699 - Stalled state of endpoint will not be cleared
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Linux USB power delivery
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFC 0/2] USB port power off bug fixes
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [GIT PULL] USB patches for v3.12 merge window
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 01/15] drivers: phy: add generic PHY framework
- From: Sylwester Nawrocki <sylvester.nawrocki@xxxxxxxxx>
- Re: [alsa-devel] Buffer size for ALSA USB PCM audio
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- RE: [PATCH] usb: dwc3: core: cope with NULL pdata
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: Commit 09fc7d22b0 (usb: musb: fix incorrect usage of resource pointer) questions
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] Buffer size for ALSA USB PCM audio
- From: Daniel Mack <zonque@xxxxxxxxx>
- Re: Commit 09fc7d22b0 (usb: musb: fix incorrect usage of resource pointer) questions
- From: Felipe Balbi <balbi@xxxxxx>
- Re: Commit 09fc7d22b0 (usb: musb: fix incorrect usage of resource pointer) questions
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: [GIT PULL] USB patches for v3.12 merge window
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/2] net: asix: Move declaration of ax88172a_info to shared header
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] net: asix: Staticise non-exported symbols
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Felipe Balbi <balbi@xxxxxx>
- RE: [GIT PULL] USB patches for v3.12 merge window
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- [PATCH] usb: dwc3: core: cope with NULL pdata
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [alsa-devel] Buffer size for ALSA USB PCM audio
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] USB patches for v3.12 merge window
- From: Felipe Balbi <balbi@xxxxxx>
- Re: Patch inclusion in kernel?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [GIT PULL] USB patches for v3.12 merge window
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: [PATCH] usb: host: add Kconfig option for EHSET
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: URBs active during clear endpoint halt?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Bin Liu <binmlist@xxxxxxxxx>
- [PATCH v2 RESEND] usb: host: add Kconfig option for EHSET
- From: Jack Pham <jackp@xxxxxxxxxxxxxx>
- RE: About the hibernation feature implementation in dwc3 driver
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- [PATCH] usb: host: add Kconfig option for EHSET
- From: Jack Pham <jackp@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] pl2303: improve the chip type information output on startup
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: About the hibernation feature implementation in dwc3 driver
- From: Felipe Balbi <balbi@xxxxxx>
- RE: About the hibernation feature implementation in dwc3 driver
- From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
- Re: [GIT PULL] USB patches for v3.12 merge window
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC v3 1/4] xhci: add trace for debug messages related to quirks
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 3/3] pl2303: improve the chip type detection/distinction
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
- [PATCH 1/3] pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
- [PATCH 2/3] pl2303: improve the chip type information output on startup
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
- [PATCH 0/3] pl2303: improve the chip type distinction
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: phy: am335x-control: include <linux/err.h>
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH] usb: phy: am335x-control: include <linux/err.h>
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [GIT PULL] USB patches for v3.12 merge window
- From: Felipe Balbi <balbi@xxxxxx>
- [GIT PULL] USB patches for v3.12 merge window
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2] usb-gadget-audio-file-wake-up-sleep-thread
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Felipe Balbi <balbi@xxxxxx>
- Re: About the hibernation feature implementation in dwc3 driver
- From: Felipe Balbi <balbi@xxxxxx>
- URBs active during clear endpoint halt?
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: host: add Kconfig option for EHSET
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/2] Device tree changes for Tegra30 and Tegra114 USB Host support
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: kernel Oops: 0003 on usbhid_submit_report
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Undetected Fresco Logic FL1000G USB 3.0 controller in Asus N43SN after replace a motherboard
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Bug 60699 - Stalled state of endpoint will not be cleared
- From: Florian Wolter <wolly84@xxxxxx>
- Re: [PATCH] usb: host: add Kconfig option for EHSET
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Bin Liu <binmlist@xxxxxxxxx>
- [PATCH 3/4] usb: musb: dma: use check macros with a type
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 4/4] usb: musb: dma: use is_dma_inventra() and is_dma_ux500() in more places
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 1/4] usb: musb: gadget: move the use_dma to the upper if
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 2/4] usb: musb: add a type to each dma engine
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [RFC] try to detetmine musb dma engine at runtime
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 07/10] staging: ozwpan: Make oz_hcd_pd_departed() take a struct pointer.
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [RFC v3] xhci-hub: Roothub USB2.0 descriptor for BESL DBESL
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 07/10] staging: ozwpan: Make oz_hcd_pd_departed() take a struct pointer.
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 1/2] usb: musb: Use is_cppi_enabled() and tusb_dma_omap() instead of the ifdef
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 2/2] usb: musb: cppi41: Enable in device-TX mode
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- enable device mode for cppi41
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH v4] usb: rh_call_control tbuf overflow fix
- From: "Sean O. Stalley" <sean.stalley@xxxxxxxxx>
- Re: [PATCH 09/10] staging: ozwpan: Swap arguments of oz_ep_alloc() to match kmalloc()
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH] usb: musb: honour the return value of dma_map_single()
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 07/10] staging: ozwpan: Make oz_hcd_pd_departed() take a struct pointer.
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH 06/10] staging: ozwpan: Make oz_hcd_pd_arrived() return a struct pointer
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 07/10] staging: ozwpan: Make oz_hcd_pd_departed() take a struct pointer.
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 08/10] staging: ozwpan: Remove unneeded initializers
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 10/10] staging: ozwpan: Separate success & failure case for oz_hcd_pd_arrived()
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 09/10] staging: ozwpan: Swap arguments of oz_ep_alloc() to match kmalloc()
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 05/10] staging: ozwpan: Remove unnecessary pointer check.
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- Re: [PATCH] Bug 60699 - Stalled state of endpoint will not be cleared
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH 01/10] staging: ozwpan: Add a blank line between declaraction and code.
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 03/10] staging: ozwpan: Simply if condition
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 02/10] staging: ozwpan: Add a blank line between functions & declarations.
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 04/10] staging: ozwpan: Fix coding style.
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- [PATCH 00/10] staging: ozwpan: Coding style fixes
- From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
- Re: Bug 60738 - USB 3.0 connection delay seems to be too short for HP USB 3.0 hard drive
- From: Kumar Gaurav <kumargauravgupta3@xxxxxxxxx>
- RE: [PATCH v3] usb: rh_call_control tbuf potential future overflow fix
- From: "Stalley, Sean" <sean.stalley@xxxxxxxxx>
- Re: [PATCH] Bug 60699 - Stalled state of endpoint will not be cleared
- From: Florian Wolter <wolly84@xxxxxx>
- Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Bug 60699 - Stalled state of endpoint will not be cleared
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH] USB: WUSBCORE: clear RPIPE stall for control endpoints
- From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
- Re: [PATCH 1/2] Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: musb dsps: fix pdev cast in suspend/resume
- From: Daniel Mack <zonque@xxxxxxxxx>
- [PATCH v2] usb: musb dsps: fix pdev cast in suspend/resume
- From: Daniel Mack <zonque@xxxxxxxxx>
- Re: [PATCH] usb: musb: dsps: depend on of_irq
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""
- From: Peter Wu <lekensteyn@xxxxxxxxx>
- Re: [PATCH] usb: musb dsps: fix pdev cast in suspend/resume
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: musb: dsps: depend on of_irq
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH net-next 1/3] net/usb/r8152: support aggregation
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH net-next 2/3] net/usb/r8152: enable tx checksum
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: [PATCH] dwc3: dwc3-pci: Use SIMPLE_DEV_PM_OPS
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH RFC] ath9k-htc: convert EP3 and EP4 back from bulk to int
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: host: add Kconfig option for EHSET
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dwc3: dwc3-pci: Use SIMPLE_DEV_PM_OPS
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: [PATCH] usb: dwc3: core: clarify usb-phy array binding
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: [PATCH] dwc3: dwc3-pci: Use SIMPLE_DEV_PM_OPS
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH] usb: musb dsps: fix pdev cast in suspend/resume
- From: Daniel Mack <zonque@xxxxxxxxx>
- RE: [PATCH net-next 1/3] net/usb/r8152: support aggregation
- From: hayeswang <hayeswang@xxxxxxxxxxx>
- Re: [PATCH 1/2] Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 01/15] drivers: phy: add generic PHY framework
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH RFC] ath9k-htc: convert EP3 and EP4 back from bulk to int
- From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 01/15] drivers: phy: add generic PHY framework
- From: Tomasz Figa <t.figa@xxxxxxxxxxx>
- [PATCH 5/7] USB: quatech2: fix serial DMA-buffer allocations
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH 0/7] USB: fixes for v3.11 (and v3.12)
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH 4/7] USB: keyspan: fix port DMA-buffer allocations
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH 2/7] USB: keyspan: fix null-deref at disconnect and release
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH 6/7] USB: quatech2: fix port DMA-buffer allocations
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH 7/7] USB: uss720: fix DMA-buffer allocation
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH 3/7] USB: keyspan: fix serial DMA-buffer allocations
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH 1/7] USB: mos7720: fix broken control requests
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH] usb: musb: dsps: depend on of_irq
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 01/15] drivers: phy: add generic PHY framework
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH 1/2] usb: musb: convert to devm_* to allocate resources
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH 2/2] usb: musb: pass on all the required resources from glue to musb core
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Undetected Fresco Logic FL1000G USB 3.0 controller in Asus N43SN after replace a motherboard
- From: Marcin Zajączkowski <mszpak@xxxxx>
- [PATCH] usb: phy: am335x: include linux/err.h
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH net-next 1/3] net/usb/r8152: support aggregation
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree
- From: Tushar Behera <tushar.behera@xxxxxxxxxx>
- [PATCH RFC] ath9k-htc: convert EP3 and EP4 back from bulk to int
- From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding information
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH net-next 1/3] net/usb/r8152: support aggregation
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next 2/3] net/usb/r8152: enable tx checksum
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [PATCH net-next 3/3] net/usb/r8152: enable interrupt transfer
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]