From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
This patch defines a new trace event, which is called xhci_dbg_context_change
and belongs in the event class xhci_log_msg, and adds tracepoints for tracing
the debug messages related to context updates performed with Configure Endpoint
and Evaluate Context commands.
Signed-off-by: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-mem.c | 4 +++-
drivers/usb/host/xhci-ring.c | 4 +++-
drivers/usb/host/xhci-trace.h | 5 +++++
drivers/usb/host/xhci.c | 24 ++++++++++++++++--------
4 files changed, 27 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index b881bc1..b1bb59b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -26,6 +26,7 @@
#include <linux/dmapool.h>
#include "xhci.h"
+#include "xhci-trace.h"
/*
* Allocates a generic ring segment from the ring pool, sets the dma address,
@@ -661,7 +662,8 @@ void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
* fls(0) = 0, fls(0x1) = 1, fls(0x10) = 2, fls(0x100) = 3, etc.
*/
max_primary_streams = fls(stream_info->num_stream_ctxs) - 2;
- xhci_dbg(xhci, "Setting number of stream ctx array entries to %u\n",
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Setting number of stream ctx array entries to %u",
1 << (max_primary_streams + 1));
ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK);
ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 5b08cd8..ba5fd5a 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -67,6 +67,7 @@
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include "xhci.h"
+#include "xhci-trace.h"
static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
@@ -1454,7 +1455,8 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
break;
}
bandwidth_change:
- xhci_dbg(xhci, "Completed config ep cmd\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Completed config ep cmd");
xhci->devs[slot_id]->cmd_status =
GET_COMP_CODE(le32_to_cpu(event->status));
complete(&xhci->devs[slot_id]->cmd_completion);
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index 432aa67..6286243 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -36,6 +36,11 @@ DEFINE_EVENT(xhci_log_msg, xhci_dbg_address,
TP_ARGS(vaf)
);
+DEFINE_EVENT(xhci_log_msg, xhci_dbg_context_change,
+ TP_PROTO(struct va_format *vaf),
+ TP_ARGS(vaf)
+);
+
#endif /* __XHCI_TRACE_H */
/* this part must be outside header guard */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index d57dc6c..fa7b6f4 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1153,12 +1153,16 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc);
if (hw_max_packet_size != max_packet_size) {
- xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
- xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Max Packet Size for ep 0 changed.");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Max packet size in usb_device = %d",
max_packet_size);
- xhci_dbg(xhci, "Max packet size in xHCI HW = %d\n",
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Max packet size in xHCI HW = %d",
hw_max_packet_size);
- xhci_dbg(xhci, "Issuing evaluate context command.\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Issuing evaluate context command.");
/* Set up the input context flags for the command */
/* FIXME: This won't work if a non-default control endpoint
@@ -1776,7 +1780,8 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
ret = -ENODEV;
break;
case COMP_SUCCESS:
- dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Successful Endpoint Configure command");
ret = 0;
break;
default:
@@ -1822,7 +1827,8 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
ret = -EINVAL;
break;
case COMP_SUCCESS:
- dev_dbg(&udev->dev, "Successful evaluate context command\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Successful evaluate context command");
ret = 0;
break;
default:
@@ -2583,7 +2589,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
xhci_free_host_resources(xhci, ctrl_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
- xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "FIXME allocate a new ring segment");
return -ENOMEM;
}
xhci_ring_cmd_db(xhci);
@@ -3865,7 +3872,8 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT));
slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency);
- xhci_dbg(xhci, "Set up evaluate context for LPM MEL change.\n");
+ xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+ "Set up evaluate context for LPM MEL change.");
xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, command->in_ctx, 0);
--
1.8.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
