So I assumed that Beagle bone has only one USB port in host mode because
the micro USB connector had an USB-UART there. I was wrong a little. The
second port runs on host mode, but the micro USB plug is connected to an
internal HUB with two ports: one to the USB-UART and one to musb
instance one.
For that reason, this patch enables both ports: the primary in device
mode only and the second in host mode only.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/am335x-bone.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index e8447a7..596d653 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -131,9 +131,24 @@
status = "okay";
};
+ usb-phy@47401b00 {
+ status = "okay";
+ };
+
usb@47401000 {
status = "okay";
};
+
+ usb@47401800 {
+ status = "okay";
+ usb@47401c00 {
+ mg,port-mode = <1>;
+ };
+ };
+
+ dma-controller@07402000 {
+ status = "okay";
+ };
};
i2c0: i2c@44e0b000 {
--
1.8.4.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
