From: Mark Brown <broonie@xxxxxxxxxx> The binding document says that all properties are required but in fact almost all are optional (and should be) - update the document to reflect this. Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx --- Documentation/devicetree/bindings/usb/usb3503.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index cd60f7e..44a03f3 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -3,6 +3,8 @@ SMSC USB3503 High-Speed Hub Controller Required properties: - compatible: Should be "smsc,usb3503" or "smsc,usb3503a". - reg: Specifies the i2c slave address, it should be 0x08. + +Optional properties: - connect-gpios: Should specify GPIO for connect. - disabled-ports: Should specify the ports unused. '1' or '2' or '3' are availe for this property to describe the port -- 1.8.4.rc1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
