Hi there,
I'm playing with 2 small usb webcams, showing up the stream of the
camera with it's plugged in and hiding it when it's unplugged. I'm
basically using 2 external camera + the integrated one.
I've noticed the usb port just become unusable after a few plug/unplug.
The kernel won't show any device connected to it (phone, camera,
etc...). But it comes back after a reboot.
I tried to rmmod the xhci_hcd module to recover the ports, but it just
led to a backtrace.
Attached is my dmesg. I'm running on 3.11-rc4 on a Lenovo X230.
Let me know if I can help to debug this issue.
Cheers,
-
Lionel
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11-rc4-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.11~rc4-1~exp1 (2013-08-08)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11-rc4-amd64 root=/dev/mapper/ivy-root ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cec2ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cec30000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2320CTO/2320CTO, BIOS G2ET82WW (2.02 ) 09/11/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21F000000 mask FFF000000 uncachable
[ 0.000000] 9 base 21E800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xcec30 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01874000, 0x01874fff] PGTABLE
[ 0.000000] BRK [0x01875000, 0x01875fff] PGTABLE
[ 0.000000] BRK [0x01876000, 0x01876fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21e400000-0x21e5fffff]
[ 0.000000] [mem 0x21e400000-0x21e5fffff] page 2M
[ 0.000000] BRK [0x01877000, 0x01877fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21e3fffff]
[ 0.000000] [mem 0x21c000000-0x21e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01878000, 0x01878fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xcec2ffff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xcebfffff] page 2M
[ 0.000000] [mem 0xcec00000-0xcec2ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x361dc000-0x370e5fff]
[ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000daffe170 000C4 (v01 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: FACP 00000000dafe6000 0010C (v05 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000dafe8000 10E11 (v01 LENOVO TP-G2 00002020 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf5a000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-G2 00002020 PTL 00000001)
[ 0.000000] ACPI: TCPA 00000000daffc000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 00000000daffb000 00408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffa000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daff9000 007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 00000000dafe4000 00038 (v01 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafe3000 00098 (v01 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafe2000 0003C (v01 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: ECDT 00000000dafe1000 00052 (v01 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: FPDT 00000000dafe0000 00064 (v01 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: ASF! 00000000dafe7000 000A5 (v32 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 00000000dafdd000 00055 (v03 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafdc000 00C79 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafdb000 00A7E (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: DMAR 00000000dafda000 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafd9000 002A6 (v01 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: DBG2 00000000dafd8000 000E9 (v00 LENOVO TP-G2 00002020 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21e5fffff]
[ 0.000000] NODE_DATA [mem 0x21e5f4000-0x21e5f7fff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216000000-ffff88021cdfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xcec2ffff]
[ 0.000000] node 0: [mem 0x100000000-0x21e5fffff]
[ 0.000000] On node 0 totalpages: 2019275
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11516 pages used for memmap
[ 0.000000] DMA32 zone: 842287 pages, LIFO batch:31
[ 0.000000] Normal zone: 16037 pages used for memmap
[ 0.000000] Normal zone: 1172992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcec30000-0xdae9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021e200000 s85504 r8192 d20992 u262144
[ 0.000000] pcpu-alloc: s85504 r8192 d20992 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1991645
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-rc4-amd64 root=/dev/mapper/ivy-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7873052K/8077100K available (3678K kernel code, 639K rwdata, 1588K rodata, 924K init, 924K bss, 204048K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2893.334 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.66 BogoMIPS (lpj=11573336)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000030] AppArmor: AppArmor disabled by boot time parameter
[ 0.000031] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002107] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002850] Mount-cache hash table entries: 256
[ 0.002988] Initializing cgroup subsys memory
[ 0.002995] Initializing cgroup subsys devices
[ 0.002996] Initializing cgroup subsys freezer
[ 0.002998] Initializing cgroup subsys net_cls
[ 0.002999] Initializing cgroup subsys blkio
[ 0.003000] Initializing cgroup subsys perf_event
[ 0.003019] CPU: Physical Processor ID: 0
[ 0.003020] CPU: Processor Core ID: 0
[ 0.003024] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003024] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003333] mce: CPU supports 7 MCE banks
[ 0.003343] CPU0: Thermal monitoring enabled (TM1)
[ 0.003349] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.003349] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.003349] tlb_flushall_shift: 1
[ 0.003437] Freeing SMP alternatives memory: 12K (ffffffff81788000 - ffffffff8178b000)
[ 0.003752] ACPI: Core revision 20130517
[ 0.009277] ACPI: All ACPI Tables successfully acquired
[ 0.010372] dmar: Host address width 36
[ 0.010374] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.010379] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.010380] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.010383] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.010384] dmar: RMRR base: 0x000000da2ba000 end: 0x000000da2d0fff
[ 0.010385] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.010458] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.010459] HPET id 0 under DRHD base 0xfed91000
[ 0.010579] Enabled IRQ remapping in x2apic mode
[ 0.010581] Enabling x2apic
[ 0.010582] Enabled x2apic
[ 0.010589] Switched APIC routing to cluster x2apic.
[ 0.011029] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050721] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (fam: 06, model: 3a, stepping: 09)
[ 0.050730] TSC deadline timer enabled
[ 0.050738] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.050744] ... version: 3
[ 0.050744] ... bit width: 48
[ 0.050745] ... generic registers: 4
[ 0.050746] ... value mask: 0000ffffffffffff
[ 0.050747] ... max period: 0000ffffffffffff
[ 0.050748] ... fixed-purpose events: 3
[ 0.050749] ... event mask: 000000070000000f
[ 0.064381] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.050964] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.091254] Brought up 4 CPUs
[ 0.091257] smpboot: Total of 4 processors activated (23146.67 BogoMIPS)
[ 0.094498] devtmpfs: initialized
[ 0.097186] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.097340] regulator-dummy: no parameters
[ 0.097388] NET: Registered protocol family 16
[ 0.097475] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.097477] ACPI: bus type PCI registered
[ 0.097478] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.097648] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.097650] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.100050] PCI: Using configuration type 1 for base access
[ 0.100631] bio: create slab <bio-0> at 0
[ 0.100730] ACPI: Added _OSI(Module Device)
[ 0.100732] ACPI: Added _OSI(Processor Device)
[ 0.100733] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100734] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.101915] ACPI: EC: EC description table is found, configuring boot EC
[ 0.105899] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.138976] ACPI: SSDT 00000000dae3a018 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.139284] ACPI: Dynamic OEM Table Load:
[ 0.139285] ACPI: SSDT (null) 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.150101] ACPI: SSDT 00000000dae3ba98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.150434] ACPI: Dynamic OEM Table Load:
[ 0.150436] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.159410] ACPI: SSDT 00000000dae39d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.159705] ACPI: Dynamic OEM Table Load:
[ 0.159707] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.170449] ACPI: Interpreter enabled
[ 0.170455] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.170458] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.170469] ACPI: (supports S0 S3 S4 S5)
[ 0.170470] ACPI: Using IOAPIC for interrupt routing
[ 0.170490] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.171755] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.182871] ACPI: Power Resource [PUBS] (on)
[ 0.187360] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.187443] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.187524] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.187605] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.187685] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.187765] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.187845] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.187926] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.187964] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.188100] PCI host bridge to bus 0000:00
[ 0.188103] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.188105] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.188106] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.188108] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.188110] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
[ 0.188111] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.188118] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.188185] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.188194] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.188199] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188202] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.188270] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.188292] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
[ 0.188360] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.188386] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.188423] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.188445] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
[ 0.188518] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.188584] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.188602] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[ 0.188610] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
[ 0.188618] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f]
[ 0.188678] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.188698] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.188732] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.188752] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
[ 0.188837] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.188867] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.188902] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.188916] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
[ 0.188981] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.189015] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.189052] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.189180] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.189244] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.189372] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.189436] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.189564] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.189600] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.189636] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.189656] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
[ 0.189742] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.189770] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.189804] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.189946] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.189964] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af]
[ 0.189971] pci 0000:00:1f.2: reg 0x14: [io 0x50b4-0x50b7]
[ 0.189979] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7]
[ 0.189987] pci 0000:00:1f.2: reg 0x1c: [io 0x50b0-0x50b3]
[ 0.189995] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.190002] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
[ 0.190044] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.190092] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.190106] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
[ 0.190126] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.190445] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
[ 0.190464] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.190491] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
[ 0.190696] pci 0000:02:00.0: supports D1 D2
[ 0.190698] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.198535] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.198540] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.198544] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.198552] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.198699] pci 0000:03:00.0: [8086:0891] type 00 class 0x028000
[ 0.198745] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
[ 0.198969] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.206495] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.206506] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.206622] acpiphp: Slot [1] registered
[ 0.206629] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.206634] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.206639] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.206647] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.206724] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.206818] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.206819] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.207801] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.207810] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.207843] Found 1 acpi root devices
[ 0.207894] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.207961] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.207963] vgaarb: loaded
[ 0.207964] vgaarb: bridge control possible 0000:00:02.0
[ 0.207995] PCI: Using ACPI for IRQ routing
[ 0.209684] PCI: pci_cache_line_size set to 64 bytes
[ 0.210184] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.210185] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.210187] e820: reserve RAM buffer [mem 0xcec30000-0xcfffffff]
[ 0.210188] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[ 0.210279] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.210284] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.212307] Switched to clocksource hpet
[ 0.213682] pnp: PnP ACPI init
[ 0.213692] ACPI: bus type PNP registered
[ 0.214041] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.214044] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.214045] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.214047] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.214049] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.214051] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.214052] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.214054] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.214056] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.214058] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.214059] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.214061] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.214063] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.214065] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.214066] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.214068] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.214070] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.214073] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.214160] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 0.214162] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.214163] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.214165] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.214167] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.214170] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.214172] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.214174] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.214176] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.214178] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.214180] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.214181] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.214183] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.214230] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.214237] pnp 00:03: [dma 4]
[ 0.214251] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.214270] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.214299] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.214325] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.214351] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.214378] pnp 00:08: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[ 0.214419] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.215054] pnp: PnP ACPI: found 10 devices
[ 0.215055] ACPI: bus type PNP unregistered
[ 0.221409] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.221414] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.221421] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.221426] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.221434] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.221441] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.221453] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.221456] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.221462] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.221467] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.221624] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.221626] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.221628] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.221629] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[ 0.221630] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.221632] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.221634] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
[ 0.221635] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.221637] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
[ 0.221638] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.221640] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
[ 0.221641] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.221696] NET: Registered protocol family 2
[ 0.221900] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.222050] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.222158] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.222173] TCP: reno registered
[ 0.222181] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.222203] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.222284] NET: Registered protocol family 1
[ 0.222293] pci 0000:00:02.0: Boot video device
[ 0.222770] PCI: CLS 64 bytes, default 64
[ 0.222801] Unpacking initramfs...
[ 0.449354] Freeing initrd memory: 15400K (ffff8800361dc000 - ffff8800370e6000)
[ 0.449364] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.449366] software IO TLB [mem 0xcac30000-0xcec30000] (64MB) mapped at [ffff8800cac30000-ffff8800cec2ffff]
[ 0.449793] audit: initializing netlink socket (disabled)
[ 0.449802] type=2000 audit(1376043135.448:1): initialized
[ 0.462464] bounce pool size: 64 pages
[ 0.462468] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.462920] VFS: Disk quotas dquot_6.5.2
[ 0.462942] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.463009] msgmni has been set to 15407
[ 0.463214] alg: No test for stdrng (krng)
[ 0.463237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.463271] io scheduler noop registered
[ 0.463272] io scheduler deadline registered
[ 0.463288] io scheduler cfq registered (default)
[ 0.463532] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.463543] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.463585] intel_idle: MWAIT substates: 0x21120
[ 0.463586] intel_idle: v0.4 model 0x3A
[ 0.463587] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.463624] GHES: HEST is not enabled!
[ 0.463664] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.464061] Linux agpgart interface v0.103
[ 0.464140] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.465719] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.465722] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.465813] mousedev: PS/2 mouse device common for all mice
[ 0.465849] rtc_cmos 00:06: RTC can wake from S4
[ 0.465977] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.466011] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.466017] Intel P-state driver initializing.
[ 0.466025] Intel pstate controlling: cpu 0
[ 0.466035] Intel pstate controlling: cpu 1
[ 0.466051] Intel pstate controlling: cpu 2
[ 0.466059] Intel pstate controlling: cpu 3
[ 0.466160] cpuidle: using governor ladder
[ 0.466259] cpuidle: using governor menu
[ 0.466294] drop_monitor: Initializing network drop monitor service
[ 0.466350] TCP: cubic registered
[ 0.466423] NET: Registered protocol family 10
[ 0.466579] mip6: Mobile IPv6
[ 0.466581] NET: Registered protocol family 17
[ 0.466799] PM: Hibernation image not present or could not be loaded.
[ 0.466806] registered taskstats version 1
[ 0.467261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.467648] rtc_cmos 00:06: setting system clock to 2013-08-09 10:12:16 UTC (1376043136)
[ 0.468448] Freeing unused kernel memory: 924K (ffffffff816a1000 - ffffffff81788000)
[ 0.468450] Write protecting the kernel read-only data: 6144k
[ 0.469408] Freeing unused kernel memory: 408K (ffff88000139a000 - ffff880001400000)
[ 0.470361] Freeing unused kernel memory: 460K (ffff88000158d000 - ffff880001600000)
[ 0.518531] udevd[70]: starting version 175
[ 0.533660] ACPI: bus type USB registered
[ 0.533686] usbcore: registered new interface driver usbfs
[ 0.533698] usbcore: registered new interface driver hub
[ 0.539747] sdhci: Secure Digital Host Controller Interface driver
[ 0.539749] sdhci: Copyright(c) Pierre Ossman
[ 0.539986] pps_core: LinuxPPS API ver. 1 registered
[ 0.539987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.540023] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 0.540598] PTP clock support registered
[ 0.541101] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.541103] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.541198] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.541245] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.541272] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 0.543469] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.543472] ACPI: Thermal Zone [THM0] (58 C)
[ 0.546393] usbcore: registered new device driver usb
[ 0.547100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.547231] ehci-pci: EHCI PCI platform driver
[ 0.552133] mmc0: no vqmmc regulator found
[ 0.552137] mmc0: no vmmc regulator found
[ 0.552758] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.557106] SCSI subsystem initialized
[ 0.559770] ACPI: bus type ATA registered
[ 0.560560] libata version 3.00 loaded.
[ 0.561440] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.808661] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.808666] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:72:cf
[ 0.808669] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.808708] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 0.808844] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.808848] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.808854] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.808969] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.808990] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 0.809040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.809042] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.809043] usb usb1: Product: xHCI Host Controller
[ 0.809044] usb usb1: Manufacturer: Linux 3.11-rc4-amd64 xhci_hcd
[ 0.809045] usb usb1: SerialNumber: 0000:00:14.0
[ 0.809138] xHCI xhci_add_endpoint called for root hub
[ 0.809148] xHCI xhci_check_bandwidth called for root hub
[ 0.809176] hub 1-0:1.0: USB hub found
[ 0.809189] hub 1-0:1.0: 4 ports detected
[ 0.809637] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.809640] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.809667] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.809668] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.809669] usb usb2: Product: xHCI Host Controller
[ 0.809670] usb usb2: Manufacturer: Linux 3.11-rc4-amd64 xhci_hcd
[ 0.809671] usb usb2: SerialNumber: 0000:00:14.0
[ 0.809804] xHCI xhci_add_endpoint called for root hub
[ 0.809806] xHCI xhci_check_bandwidth called for root hub
[ 0.809833] hub 2-0:1.0: USB hub found
[ 0.809842] hub 2-0:1.0: 4 ports detected
[ 0.844799] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.844819] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.844833] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.844857] ehci-pci 0000:00:1a.0: debug port 2
[ 0.848764] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.848774] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
[ 0.860576] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.860762] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.860764] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.860765] usb usb3: Product: EHCI Host Controller
[ 0.860767] usb usb3: Manufacturer: Linux 3.11-rc4-amd64 ehci_hcd
[ 0.860768] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.860999] hub 3-0:1.0: USB hub found
[ 0.861005] hub 3-0:1.0: 3 ports detected
[ 0.861256] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.861261] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.861266] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.861282] ehci-pci 0000:00:1d.0: debug port 2
[ 0.865182] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.865201] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
[ 0.876587] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.876638] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.876640] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876642] usb usb4: Product: EHCI Host Controller
[ 0.876643] usb usb4: Manufacturer: Linux 3.11-rc4-amd64 ehci_hcd
[ 0.876644] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.876859] hub 4-0:1.0: USB hub found
[ 0.876865] hub 4-0:1.0: 3 ports detected
[ 0.877029] ahci 0000:00:1f.2: version 3.0
[ 0.877169] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.877208] ahci: SSS flag set, parallel bus scan disabled
[ 0.892631] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[ 0.892635] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 0.892652] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.909463] scsi0 : ahci
[ 0.909640] scsi1 : ahci
[ 0.909759] scsi2 : ahci
[ 0.909885] scsi3 : ahci
[ 0.910006] scsi4 : ahci
[ 0.910123] scsi5 : ahci
[ 0.910541] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 44
[ 0.910544] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 44
[ 0.910545] ata3: DUMMY
[ 0.910546] ata4: DUMMY
[ 0.910549] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 44
[ 0.910550] ata6: DUMMY
[ 1.172613] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.228703] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.229832] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.229838] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.240211] ata1.00: ATA-9: INTEL SSDSC2CW180A3, 400i, max UDMA/133
[ 1.240217] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.249751] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.249759] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.260194] ata1.00: configured for UDMA/133
[ 1.260447] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW18 400i PQ: 0 ANSI: 5
[ 1.305575] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.305581] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.306099] hub 3-1:1.0: USB hub found
[ 1.306301] hub 3-1:1.0: 6 ports detected
[ 1.420720] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.448751] tsc: Refined TSC clocksource calibration: 2893.426 MHz
[ 1.553308] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.553314] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.553742] hub 4-1:1.0: USB hub found
[ 1.553917] hub 4-1:1.0: 8 ports detected
[ 1.580772] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.629022] usb 3-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.727339] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[ 1.727346] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.727350] usb 3-1.4: Product: BCM20702A0
[ 1.727353] usb 3-1.4: Manufacturer: Broadcom Corp
[ 1.727356] usb 3-1.4: SerialNumber: 083E8EE5E028
[ 1.801096] usb 3-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.900827] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.901527] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d2
[ 1.901534] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.901539] usb 3-1.6: Product: Integrated Camera
[ 1.901543] usb 3-1.6: Manufacturer: Ricoh Company Ltd.
[ 1.906083] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
[ 1.906243] sd 0:0:0:0: [sda] Write Protect is off
[ 1.906249] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.906291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.907292] sda: sda1 sda2 < sda5 >
[ 1.907886] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.909609] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.944316] device-mapper: uevent: version 1.0.3
[ 1.944417] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx
[ 1.973015] usb 4-1.8: new high-speed USB device number 3 using ehci-pci
[ 2.065634] usb 4-1.8: New USB device found, idVendor=17ef, idProduct=100a
[ 2.065640] usb 4-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.066130] hub 4-1.8:1.0: USB hub found
[ 2.066294] hub 4-1.8:1.0: 7 ports detected
[ 2.337169] usb 4-1.8.2: new full-speed USB device number 4 using ehci-pci
[ 2.433181] usb 4-1.8.2: New USB device found, idVendor=046d, idProduct=c52b
[ 2.433188] usb 4-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.433192] usb 4-1.8.2: Product: USB Receiver
[ 2.433195] usb 4-1.8.2: Manufacturer: Logitech
[ 2.437446] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.442309] usbcore: registered new interface driver usbhid
[ 2.442313] usbhid: USB HID core driver
[ 2.445548] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.8.2/input2
[ 2.447712] input: Logitech Unifying Device. Wireless PID:101d as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.2/0003:046D:C52B.0003/input/input1
[ 2.447851] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101d] on usb-0000:00:1d.0-1.8.2:1
[ 2.453019] Switched to clocksource tsc
[ 2.633226] usb 4-1.8.3: new high-speed USB device number 5 using ehci-pci
[ 2.744813] usb 4-1.8.3: New USB device found, idVendor=0ac8, idProduct=3450
[ 2.744820] usb 4-1.8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.744824] usb 4-1.8.3: Product: Venus USB2.0 Camera
[ 2.744827] usb 4-1.8.3: Manufacturer: Vimicro Corp.
[ 2.833283] usb 4-1.8.4: new low-speed USB device number 6 using ehci-pci
[ 2.930993] usb 4-1.8.4: New USB device found, idVendor=413c, idProduct=2106
[ 2.931000] usb 4-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.931004] usb 4-1.8.4: Product: Dell QuietKey Keyboard
[ 2.931007] usb 4-1.8.4: Manufacturer: DELL
[ 2.939404] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.4/4-1.8.4:1.0/input/input2
[ 2.939527] hid-generic 0003:413C:2106.0005: input,hidraw2: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.8.4/input0
[ 3.133357] usb 4-1.8.5: new high-speed USB device number 7 using ehci-pci
[ 3.227036] usb 4-1.8.5: New USB device found, idVendor=18d1, idProduct=4ee1
[ 3.227044] usb 4-1.8.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.227047] usb 4-1.8.5: Product: Nexus 4
[ 3.227050] usb 4-1.8.5: Manufacturer: LGE
[ 3.227053] usb 4-1.8.5: SerialNumber: 00480532094ba617
[ 8.499124] bio: create slab <bio-1> at 1
[ 8.603043] bio: create slab <bio-1> at 1
[ 8.710575] raid6: sse2x1 9471 MB/s
[ 8.778594] raid6: sse2x2 12134 MB/s
[ 8.846608] raid6: sse2x4 13732 MB/s
[ 8.846609] raid6: using algorithm sse2x4 (13732 MB/s)
[ 8.846611] raid6: using ssse3x2 recovery algorithm
[ 8.846765] xor: automatically using best checksumming function:
[ 8.886617] avx : 27619.000 MB/sec
[ 8.888236] bio: create slab <bio-2> at 2
[ 8.888331] Btrfs loaded
[ 8.892738] PM: Starting manual resume from disk
[ 8.892740] PM: Hibernation image partition 254:2 present
[ 8.892741] PM: Looking for hibernation image.
[ 8.892954] PM: Image not found (code -22)
[ 8.892955] PM: Hibernation image not present or could not be loaded.
[ 8.896721] kjournald starting. Commit interval 5 seconds
[ 8.896754] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 8.959120] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 8.968723] systemd[1]: Inserted module 'autofs4'
[ 8.969141] systemd[1]: Set hostname to <ivy>.
[ 9.027372] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 9.027532] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 9.027588] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.027601] systemd[1]: Starting Syslog Socket.
[ 9.027634] systemd[1]: Listening on Syslog Socket.
[ 9.027643] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 9.027664] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.027720] systemd[1]: Starting udev Kernel Socket.
[ 9.027738] systemd[1]: Listening on udev Kernel Socket.
[ 9.027747] systemd[1]: Starting Delayed Shutdown Socket.
[ 9.027765] systemd[1]: Listening on Delayed Shutdown Socket.
[ 9.027809] systemd[1]: Starting udev Control Socket.
[ 9.027829] systemd[1]: Listening on udev Control Socket.
[ 9.027840] systemd[1]: Expecting device dev-disk-by\x2duuid-c21fd7d8\x2da76e\x2d4a5c\x2db4cb\x2d78bd651919dc.device...
[ 9.027849] systemd[1]: Expecting device dev-mapper-sda5_crypt.device...
[ 9.027868] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 9.027948] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.027959] systemd[1]: Starting Journal Socket.
[ 9.027992] systemd[1]: Listening on Journal Socket.
[ 9.028004] systemd[1]: Starting LSB: Set keymap...
[ 9.028382] systemd[1]: Starting udev Kernel Device Manager...
[ 9.028662] systemd[1]: Starting Syslog.
[ 9.028672] systemd[1]: Reached target Syslog.
[ 9.028685] systemd[1]: Starting udev Coldplug all Devices...
[ 9.031113] systemd[1]: Starting Load Kernel Modules...
[ 9.034614] systemd[1]: Starting Apply Kernel Variables...
[ 9.034916] systemd[1]: Mounting Huge Pages File System...
[ 9.035213] systemd[1]: Mounting Debug File System...
[ 9.035575] systemd[1]: Starting Create static device nodes in /dev...
[ 9.035953] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.036226] systemd[1]: Starting Journal Service...
[ 9.036568] systemd[1]: Started Journal Service.
[ 9.038199] systemd[1]: Started Set Up Additional Binary Formats.
[ 9.038213] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 9.038249] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 9.038259] systemd[1]: Starting Paths.
[ 9.038268] systemd[1]: Reached target Paths.
[ 9.038276] systemd[1]: Expecting device dev-mapper-ivy\x2dswap_1.device...
[ 9.038286] systemd[1]: Mounting Temporary Directory...
[ 9.039987] fuse init (API version 7.22)
[ 9.040350] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 9.040756] systemd[1]: Starting File System Check on Root Device...
[ 9.041136] systemd[1]: Expecting device dev-disk-by\x2duuid-cf67deb4\x2d4767\x2d48fa\x2d8682\x2dd9d09429cb58.device...
[ 9.041871] systemd[1]: Started LSB: Set keymap.
[ 9.042358] systemd[1]: Started Apply Kernel Variables.
[ 9.046746] loop: module loaded
[ 9.054902] systemd-journald[411]: Failed to resolve 'systemd-journal' group: No such process
[ 9.055083] udevd[425]: starting version 175
[ 9.091001] tun: Universal TUN/TAP device driver, 1.6
[ 9.091003] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 9.143110] mei_me 0000:00:16.0: setting latency timer to 64
[ 9.143150] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 9.143777] ACPI: Requesting acpi_cpufreq
[ 9.151922] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 9.153038] ACPI: Lid Switch [LID]
[ 9.153094] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 9.153099] ACPI: Sleep Button [SLPB]
[ 9.153154] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 9.153156] ACPI: Power Button [PWRF]
[ 9.159322] EXT3-fs (dm-1): using internal journal
[ 9.163598] [drm] Initialized drm 1.1.0 20060810
[ 9.163595] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130517/utaddress-251)
[ 9.163604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.163611] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
[ 9.163614] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.163615] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
[ 9.163618] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.163619] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.167093] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.171259] wmi: Mapper loaded
[ 9.176067] [drm] Memory usable by graphics device = 2048M
[ 9.176073] i915 0000:00:02.0: setting latency timer to 64
[ 9.179965] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x13
[ 9.189843] cfg80211: Calling CRDA to update world regulatory domain
[ 9.190546] ACPI: AC Adapter [AC] (on-line)
[ 9.195734] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 9.195743] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.195745] [drm] Driver supports precise vblank timestamp query.
[ 9.195804] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.196185] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[ 9.199257] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 9.199259] Copyright(c) 2003-2013 Intel Corporation
[ 9.199339] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.199568] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X
[ 9.204675] ACPI: Battery Slot [BAT0] (battery present)
[ 9.205942] iwlwifi 0000:03:00.0: firmware: agent loaded iwlwifi-2000-6.ucode into memory
[ 9.206105] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 9.214593] Non-volatile memory driver v1.3
[ 9.227721] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 9.227724] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 9.227726] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 9.227728] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P enabled
[ 9.227730] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2200 BGN, REV=0x104
[ 9.227832] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 9.229409] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 9.229411] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 9.229413] thinkpad_acpi: ThinkPad BIOS G2ET82WW (2.02 ), EC unknown
[ 9.229414] thinkpad_acpi: Lenovo ThinkPad X230, model 2320CTO
[ 9.229990] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 9.230275] thinkpad_acpi: radio switch found; radios are enabled
[ 9.230380] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 9.230382] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 9.245048] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 9.246584] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 9.246648] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 9.248278] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 9.257498] iTCO_vendor_support: vendor-support=0
[ 9.258023] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.258486] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 9.258516] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 9.258597] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.262436] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 9.262481] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x13
[ 9.266831] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 9.270939] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 9.270982] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x13
[ 9.273349] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 9.273391] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x13
[ 9.277990] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 9.278303] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 9.298268] cfg80211: World regulatory domain updated:
[ 9.298272] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.298274] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.298275] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.298277] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.298278] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.298279] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.300131] Adding 7151612k swap on /dev/mapper/ivy-swap_1. Priority:-1 extents:1 across:7151612k SS
[ 9.309795] Bluetooth: Core ver 2.16
[ 9.309808] NET: Registered protocol family 31
[ 9.309809] Bluetooth: HCI device and connection manager initialized
[ 9.309816] Bluetooth: HCI socket layer initialized
[ 9.309818] Bluetooth: L2CAP socket layer initialized
[ 9.309824] Bluetooth: SCO socket layer initialized
[ 9.310356] media: Linux media interface: v0.10
[ 9.311765] usbcore: registered new interface driver btusb
[ 9.313906] Linux video capture interface: v2.00
[ 9.322304] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
[ 9.322751] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 9.326486] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8
[ 9.326561] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3450)
[ 9.328602] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.3/4-1.8.3:1.0/input/input9
[ 9.328663] usbcore: registered new interface driver uvcvideo
[ 9.328665] USB Video Class driver (1.1.1)
[ 9.424860] RPC: Registered named UNIX socket transport module.
[ 9.424862] RPC: Registered udp transport module.
[ 9.424863] RPC: Registered tcp transport module.
[ 9.424864] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.428179] FS-Cache: Loaded
[ 9.433836] FS-Cache: Netfs 'nfs' registered for caching
[ 9.440575] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 9.449733] fbcon: inteldrmfb (fb0) is primary device
[ 10.024156] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
[ 10.024170] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 10.063730] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 10.405193] Console: switching to colour frame buffer device 170x48
[ 10.410973] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.410977] i915 0000:00:02.0: registered panic notifier
[ 10.463698] acpi device:01: registered as cooling_device4
[ 10.463815] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 10.463875] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 10.464433] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.464579] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 10.465546] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 10.496662] lp: driver loaded but no devices found
[ 10.501262] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 10.503720] ppdev: user-space parallel port driver
[ 10.535862] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.536001] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 10.537668] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 10.537793] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 10.537920] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 10.538040] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 10.538157] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 10.554302] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.554306] Bluetooth: BNEP filters: protocol multicast
[ 10.554314] Bluetooth: BNEP socket layer initialized
[ 10.616722] rfkill: input handler disabled
[ 10.819443] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 10.901571] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 11.003232] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 11.003328] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 11.947579] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 0, found 1)
[ 11.947584] ------------[ cut here ]------------
[ 11.947619] WARNING: CPU: 2 PID: 1818 at /build/linux-mON3nB/linux-3.11~rc4/drivers/gpu/drm/i915/intel_display.c:8284 check_crtc_state+0x631/0x690 [i915]()
[ 11.947621] pipe state doesn't match!
[ 11.947623] Modules linked in: bnep parport_pc snd_hda_codec_hdmi ppdev snd_hda_codec_realtek lp binfmt_misc parport joydev nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc ext2 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev btusb media bluetooth crc16 x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support arc4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm thinkpad_acpi snd_page_alloc iwldvm nvram mac80211 snd_seq snd_seq_device snd_timer iwlwifi battery snd tpm_tis ac i2c_i801 cfg80211 microcode tpm tpm_bios psmouse i915 wmi evdev serio_raw pcspkr video drm_kms_helper rfkill lpc_ich drm mfd_core i2c_algo_bit button i2c_core mperf soundcore processor mei_me mei vhost_net tun vhost macvtap macvlan kvm_intel kvm loop fuse autofs4 ext3 mbcache jbd btrfs xor raid6_pq libcrc32c zlib_deflate sha256_generic hid_generic hid_logitech_dj usbhid hid dm_crypt dm_mod sg sd_mod crc_t10dif crc32c_intel ghash_clmulni_intel ahci libahci libata scsi_mod aesni_intel ehci_pci ehci_hcd xhci_hcd aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper e1000e ptp sdhci_pci pps_core sdhci mmc_core thermal thermal_sys usbcore usb_common
[ 11.947722] CPU: 2 PID: 1818 Comm: Xorg Not tainted 3.11-rc4-amd64 #1 Debian 3.11~rc4-1~exp1
[ 11.947724] Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET82WW (2.02 ) 09/11/2012
[ 11.947727] 0000000000000000 ffffffff8138a7b2 ffff880213b91920 ffffffff810439d7
[ 11.947731] ffffffffa044d915 ffff880211c93000 ffff880213b91970 ffff880211c936d0
[ 11.947735] ffff880213b91988 ffffffff81043a85 ffffffffa048fea3 ffffffff00000018
[ 11.947739] Call Trace:
[ 11.947748] [<ffffffff8138a7b2>] ? dump_stack+0x41/0x51
[ 11.947754] [<ffffffff810439d7>] ? warn_slowpath_common+0x74/0x89
[ 11.947772] [<ffffffffa044d915>] ? check_crtc_state+0x631/0x690 [i915]
[ 11.947776] [<ffffffff81043a85>] ? warn_slowpath_fmt+0x47/0x49
[ 11.947793] [<ffffffffa044d915>] ? check_crtc_state+0x631/0x690 [i915]
[ 11.947814] [<ffffffffa045689b>] ? intel_modeset_check_state+0x36f/0x613 [i915]
[ 11.947832] [<ffffffffa0456bac>] ? intel_set_mode+0x1a/0x20 [i915]
[ 11.947849] [<ffffffffa0457176>] ? intel_crtc_set_config+0x5c4/0x7cb [i915]
[ 11.947865] [<ffffffffa0406ff7>] ? drm_mode_set_config_internal+0x44/0xac [drm]
[ 11.947878] [<ffffffffa0408687>] ? drm_mode_setcrtc+0x420/0x4c2 [drm]
[ 11.947890] [<ffffffffa042de90>] ? i915_write32+0xae/0xc2 [i915]
[ 11.947904] [<ffffffffa03fc4e4>] ? drm_ioctl+0x29a/0x3d2 [drm]
[ 11.947916] [<ffffffffa0408267>] ? drm_mode_setplane+0x317/0x317 [drm]
[ 11.947921] [<ffffffff8138e888>] ? _raw_spin_lock_bh+0xb/0x16
[ 11.947927] [<ffffffff811217a8>] ? vfs_ioctl+0x1b/0x25
[ 11.947930] [<ffffffff81121f74>] ? do_vfs_ioctl+0x3ae/0x3f0
[ 11.947934] [<ffffffff81122004>] ? SyS_ioctl+0x4e/0x79
[ 11.947939] [<ffffffff81393d29>] ? system_call_fastpath+0x16/0x1b
[ 11.947942] ---[ end trace f144bdfb3128ec19 ]---
[ 12.171568] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 0, found 1)
[ 12.171572] ------------[ cut here ]------------
[ 12.171595] WARNING: CPU: 2 PID: 1818 at /build/linux-mON3nB/linux-3.11~rc4/drivers/gpu/drm/i915/intel_display.c:8284 check_crtc_state+0x631/0x690 [i915]()
[ 12.171597] pipe state doesn't match!
[ 12.171598] Modules linked in: bnep parport_pc snd_hda_codec_hdmi ppdev snd_hda_codec_realtek lp binfmt_misc parport joydev nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc ext2 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev btusb media bluetooth crc16 x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support arc4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm thinkpad_acpi snd_page_alloc iwldvm nvram mac80211 snd_seq snd_seq_device snd_timer iwlwifi battery snd tpm_tis ac i2c_i801 cfg80211 microcode tpm tpm_bios psmouse i915 wmi evdev serio_raw pcspkr video drm_kms_helper rfkill lpc_ich drm mfd_core i2c_algo_bit button i2c_core mperf soundcore processor mei_me mei vhost_net tun vhost macvtap macvlan kvm_intel kvm loop fuse autofs4 ext3 mbcache jbd btrfs xor raid6_pq libcrc32c zlib_deflate sha256_generic hid_generic hid_logitech_dj usbhid hid dm_crypt dm_mod sg sd_mod crc_t10dif crc32c_intel ghash_clmulni_intel ahci libahci libata scsi_mod aesni_intel ehci_pci ehci_hcd xhci_hcd aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper e1000e ptp sdhci_pci pps_core sdhci mmc_core thermal thermal_sys usbcore usb_common
[ 12.171669] CPU: 2 PID: 1818 Comm: Xorg Tainted: G W 3.11-rc4-amd64 #1 Debian 3.11~rc4-1~exp1
[ 12.171671] Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET82WW (2.02 ) 09/11/2012
[ 12.171673] 0000000000000000 ffffffff8138a7b2 ffff880213b91920 ffffffff810439d7
[ 12.171676] ffffffffa044d915 ffff880211c93000 ffff880213b91970 ffff880211c936d0
[ 12.171679] ffff880213b91988 ffffffff81043a85 ffffffffa048fea3 ffffffff00000018
[ 12.171681] Call Trace:
[ 12.171688] [<ffffffff8138a7b2>] ? dump_stack+0x41/0x51
[ 12.171692] [<ffffffff810439d7>] ? warn_slowpath_common+0x74/0x89
[ 12.171703] [<ffffffffa044d915>] ? check_crtc_state+0x631/0x690 [i915]
[ 12.171706] [<ffffffff81043a85>] ? warn_slowpath_fmt+0x47/0x49
[ 12.171717] [<ffffffffa044d915>] ? check_crtc_state+0x631/0x690 [i915]
[ 12.171731] [<ffffffffa045689b>] ? intel_modeset_check_state+0x36f/0x613 [i915]
[ 12.171742] [<ffffffffa0456bac>] ? intel_set_mode+0x1a/0x20 [i915]
[ 12.171753] [<ffffffffa0457176>] ? intel_crtc_set_config+0x5c4/0x7cb [i915]
[ 12.171763] [<ffffffffa0406ff7>] ? drm_mode_set_config_internal+0x44/0xac [drm]
[ 12.171772] [<ffffffffa0408687>] ? drm_mode_setcrtc+0x420/0x4c2 [drm]
[ 12.171780] [<ffffffffa042de90>] ? i915_write32+0xae/0xc2 [i915]
[ 12.171788] [<ffffffffa03fc4e4>] ? drm_ioctl+0x29a/0x3d2 [drm]
[ 12.171796] [<ffffffffa0408267>] ? drm_mode_setplane+0x317/0x317 [drm]
[ 12.171799] [<ffffffff8138e888>] ? _raw_spin_lock_bh+0xb/0x16
[ 12.171803] [<ffffffff811217a8>] ? vfs_ioctl+0x1b/0x25
[ 12.171806] [<ffffffff81121f74>] ? do_vfs_ioctl+0x3ae/0x3f0
[ 12.171808] [<ffffffff81122004>] ? SyS_ioctl+0x4e/0x79
[ 12.171812] [<ffffffff81393d29>] ? system_call_fastpath+0x16/0x1b
[ 12.171814] ---[ end trace f144bdfb3128ec1a ]---
[ 12.895987] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 13.916741] ------------[ cut here ]------------
[ 13.916768] WARNING: CPU: 0 PID: 1818 at /build/linux-mON3nB/linux-3.11~rc4/drivers/gpu/drm/i915/intel_display.c:5530 ironlake_crtc_mode_set+0x870/0x9a1 [i915]()
[ 13.916771] Modules linked in: bnep parport_pc snd_hda_codec_hdmi ppdev snd_hda_codec_realtek lp binfmt_misc parport joydev nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc ext2 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev btusb media bluetooth crc16 x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support arc4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm thinkpad_acpi snd_page_alloc iwldvm nvram mac80211 snd_seq snd_seq_device snd_timer iwlwifi battery snd tpm_tis ac i2c_i801 cfg80211 microcode tpm tpm_bios psmouse i915 wmi evdev serio_raw pcspkr video drm_kms_helper rfkill lpc_ich drm mfd_core i2c_algo_bit button i2c_core mperf soundcore processor mei_me mei vhost_net tun vhost macvtap macvlan kvm_intel kvm loop fuse autofs4 ext3 mbcache jbd btrfs xor raid6_pq libcrc32c zlib_deflate sha256_generic hid_generic hid_logitech_dj usbhid hid dm_crypt dm_mod sg sd_mod crc_t10dif crc32c_intel ghash_clmulni_intel ahci libahci libata scsi_mod aesni_intel ehci_pci ehci_hcd xhci_hcd aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper e1000e ptp sdhci_pci pps_core sdhci mmc_core thermal thermal_sys usbcore usb_common
[ 13.916861] CPU: 0 PID: 1818 Comm: Xorg Tainted: G W 3.11-rc4-amd64 #1 Debian 3.11~rc4-1~exp1
[ 13.916863] Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET82WW (2.02 ) 09/11/2012
[ 13.916865] 0000000000000000 ffffffff8138a7b2 0000000000000000 ffffffff810439d7
[ 13.916870] ffffffffa045377c ffff8802114fe910 0000000044010001 ffff8802114fc000
[ 13.916873] ffff8802114fc000 ffffffffa045377c ffffffff00000001 00020e08a0433211
[ 13.916877] Call Trace:
[ 13.916884] [<ffffffff8138a7b2>] ? dump_stack+0x41/0x51
[ 13.916889] [<ffffffff810439d7>] ? warn_slowpath_common+0x74/0x89
[ 13.916904] [<ffffffffa045377c>] ? ironlake_crtc_mode_set+0x870/0x9a1 [i915]
[ 13.916918] [<ffffffffa045377c>] ? ironlake_crtc_mode_set+0x870/0x9a1 [i915]
[ 13.916933] [<ffffffffa0455904>] ? __intel_set_mode+0xd2e/0xf4c [i915]
[ 13.916951] [<ffffffffa0456b9d>] ? intel_set_mode+0xb/0x20 [i915]
[ 13.916966] [<ffffffffa0457176>] ? intel_crtc_set_config+0x5c4/0x7cb [i915]
[ 13.916977] [<ffffffffa0406ff7>] ? drm_mode_set_config_internal+0x44/0xac [drm]
[ 13.916987] [<ffffffffa0408687>] ? drm_mode_setcrtc+0x420/0x4c2 [drm]
[ 13.916998] [<ffffffffa042de90>] ? i915_write32+0xae/0xc2 [i915]
[ 13.917007] [<ffffffffa03fc4e4>] ? drm_ioctl+0x29a/0x3d2 [drm]
[ 13.917016] [<ffffffffa0408267>] ? drm_mode_setplane+0x317/0x317 [drm]
[ 13.917021] [<ffffffff811217a8>] ? vfs_ioctl+0x1b/0x25
[ 13.917024] [<ffffffff81121f74>] ? do_vfs_ioctl+0x3ae/0x3f0
[ 13.917029] [<ffffffff8111510d>] ? vfs_read+0xa9/0xee
[ 13.917032] [<ffffffff8111528b>] ? SyS_read+0x79/0x90
[ 13.917036] [<ffffffff81122004>] ? SyS_ioctl+0x4e/0x79
[ 13.917040] [<ffffffff81393d29>] ? system_call_fastpath+0x16/0x1b
[ 13.917042] ---[ end trace f144bdfb3128ec1b ]---
[ 14.046407] [drm:ivb_manual_fdi_link_train] *ERROR* FDI train 1 fail!
[ 14.048571] [drm:ivb_manual_fdi_link_train] *ERROR* FDI train 2 fail!
[ 14.169174] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 14.365553] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input20
[ 14.553369] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 14.553404] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 217.994931] usb 3-1.4: USB disconnect, device number 3
[ 390.857684] usb 4-1.8.3: USB disconnect, device number 5
[ 422.364899] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 422.400789] usb 1-1: New USB device found, idVendor=0ac8, idProduct=3450
[ 422.400795] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 422.400799] usb 1-1: Product: Venus USB2.0 Camera
[ 422.400801] usb 1-1: Manufacturer: Vimicro Corp.
[ 422.401942] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3450)
[ 422.404218] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input21
[ 432.023372] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 432.058890] usb 1-2: New USB device found, idVendor=0ac8, idProduct=3450
[ 432.058893] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 432.058895] usb 1-2: Product: Venus USB2.0 Camera
[ 432.058896] usb 1-2: Manufacturer: Vimicro Corp.
[ 432.059679] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3450)
[ 432.061356] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input22
[ 481.531710] usb 1-2: USB disconnect, device number 3
[ 534.667216] xhci_hcd 0000:00:14.0: Signal while waiting for configure endpoint command
[ 534.667258] usb 1-1: Not enough bandwidth for altsetting 0
[ 539.676079] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[ 539.676085] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
[ 539.676123] xhci_hcd 0000:00:14.0: HC died; cleaning up
[ 539.676390] usb 1-1: USB disconnect, device number 2
[ 539.704304] xhci_hcd 0000:00:14.0: Slot 1 endpoint 2 not removed from BW list!
[ 590.273710] usb 4-1.8.6: new high-speed USB device number 8 using ehci-pci
[ 590.385326] usb 4-1.8.6: New USB device found, idVendor=0ac8, idProduct=3450
[ 590.385332] usb 4-1.8.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 590.385335] usb 4-1.8.6: Product: Venus USB2.0 Camera
[ 590.385337] usb 4-1.8.6: Manufacturer: Vimicro Corp.
[ 590.386442] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3450)
[ 590.388910] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.6/4-1.8.6:1.0/input/input23
[ 597.447598] usb 4-1.8.3: new high-speed USB device number 9 using ehci-pci
[ 597.559289] usb 4-1.8.3: New USB device found, idVendor=0ac8, idProduct=3450
[ 597.559293] usb 4-1.8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 597.559296] usb 4-1.8.3: Product: Venus USB2.0 Camera
[ 597.559298] usb 4-1.8.3: Manufacturer: Vimicro Corp.
[ 597.560253] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3450)
[ 597.562117] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.3/4-1.8.3:1.0/input/input24
[ 598.420761] uvcvideo: Failed to submit URB 0 (-28).
[ 611.074905] usb 4-1.8.3: USB disconnect, device number 9
[ 637.705625] usb 4-1.8.5: USB disconnect, device number 7
[ 641.487298] usb 4-1.8.5: new high-speed USB device number 10 using ehci-pci
[ 641.581314] usb 4-1.8.5: New USB device found, idVendor=18d1, idProduct=4ee1
[ 641.581330] usb 4-1.8.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 641.581332] usb 4-1.8.5: Product: Nexus 4
[ 641.581334] usb 4-1.8.5: Manufacturer: LGE
[ 641.581336] usb 4-1.8.5: SerialNumber: 00480532094ba617
[ 643.595156] usb 4-1.8.6: USB disconnect, device number 8
[ 692.188797] usb 4-1.8.6: new high-speed USB device number 11 using ehci-pci
[ 692.300549] usb 4-1.8.6: New USB device found, idVendor=0ac8, idProduct=3450
[ 692.300554] usb 4-1.8.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 692.300557] usb 4-1.8.6: Product: Venus USB2.0 Camera
[ 692.300559] usb 4-1.8.6: Manufacturer: Vimicro Corp.
[ 692.301764] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3450)
[ 692.304328] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.6/4-1.8.6:1.0/input/input25
[ 712.989186] usb 4-1.8.6: USB disconnect, device number 11
[ 713.298158] traps: gjs[3705] general protection ip:7fc4ba3055f8 sp:7ffff9c6a040 error:0 in libgobject-2.0.so.0.3705.0[7fc4ba2ec000+4f000]
[ 733.928025] usb 4-1.8.6: new high-speed USB device number 12 using ehci-pci
[ 734.039531] usb 4-1.8.6: New USB device found, idVendor=0ac8, idProduct=3450
[ 734.039537] usb 4-1.8.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 734.039541] usb 4-1.8.6: Product: Venus USB2.0 Camera
[ 734.039544] usb 4-1.8.6: Manufacturer: Vimicro Corp.
[ 734.040947] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3450)
[ 734.042802] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.6/4-1.8.6:1.0/input/input26
[ 752.365048] usb 4-1.8.3: new high-speed USB device number 13 using ehci-pci
[ 752.476636] usb 4-1.8.3: New USB device found, idVendor=0ac8, idProduct=3450
[ 752.476640] usb 4-1.8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 752.476642] usb 4-1.8.3: Product: Venus USB2.0 Camera
[ 752.476644] usb 4-1.8.3: Manufacturer: Vimicro Corp.
[ 752.477655] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3450)
[ 752.479985] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.3/4-1.8.3:1.0/input/input27
[ 753.262007] uvcvideo: Failed to submit URB 0 (-28).
[ 755.752418] usb 4-1.8.3: USB disconnect, device number 13
[ 774.701215] usb 4-1.8.6: USB disconnect, device number 12
[ 1125.256268] usb 4-1.8.5: USB disconnect, device number 10
[ 1126.992601] usb 4-1.8.6: new high-speed USB device number 14 using ehci-pci
[ 1142.068644] usb 4-1.8.6: device descriptor read/64, error -110
[ 1157.248581] usb 4-1.8.6: device descriptor read/64, error -110
[ 1157.424628] usb 4-1.8.6: new high-speed USB device number 15 using ehci-pci
[ 1172.500667] usb 4-1.8.6: device descriptor read/64, error -110
[ 1187.680743] usb 4-1.8.6: device descriptor read/64, error -110
[ 1187.856792] usb 4-1.8.6: new high-speed USB device number 16 using ehci-pci
[ 1198.267495] usb 4-1.8.6: device not accepting address 16, error -110
[ 1198.339642] usb 4-1.8.6: new high-speed USB device number 17 using ehci-pci
[ 1208.750279] usb 4-1.8.6: device not accepting address 17, error -110
[ 1208.750350] hub 4-1.8:1.0: unable to enumerate USB device on port 6
[ 1260.047662] xhci_hcd 0000:00:14.0: remove, state 4
[ 1260.047671] usb usb2: USB disconnect, device number 1
[ 1260.047783] xHCI xhci_drop_endpoint called for root hub
[ 1260.047785] xHCI xhci_check_bandwidth called for root hub
[ 1260.047891] xhci_hcd 0000:00:14.0: USB bus 2 deregistered
[ 1260.047896] xhci_hcd 0000:00:14.0: remove, state 1
[ 1260.047900] usb usb1: USB disconnect, device number 1
[ 1260.048001] xHCI xhci_drop_endpoint called for root hub
[ 1260.048003] xHCI xhci_check_bandwidth called for root hub
[ 1260.048131] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 1260.048179] IP: [<ffffffffa0150b8c>] xhci_mem_cleanup+0x376/0x410 [xhci_hcd]
[ 1260.048222] PGD 0
[ 1260.048235] Oops: 0002 [#1] SMP
[ 1260.048255] Modules linked in: bnep parport_pc snd_hda_codec_hdmi ppdev snd_hda_codec_realtek lp binfmt_misc parport joydev nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc ext2 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev btusb media bluetooth crc16 x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support arc4 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm thinkpad_acpi snd_page_alloc iwldvm nvram mac80211 snd_seq snd_seq_device snd_timer iwlwifi battery snd tpm_tis ac i2c_i801 cfg80211 microcode tpm tpm_bios psmouse i915 wmi evdev serio_raw pcspkr video drm_kms_helper rfkill lpc_ich drm mfd_core i2c_algo_bit button i2c_core mperf soundcore processor mei_me mei vhost_net tun vhost macvtap macvlan kvm_intel kvm loop fuse autofs4 ext3 mbcache jbd btrfs xor raid6_pq libcrc32c zlib_deflate sha256_generic hid_generic hid_logitech_dj usbhid hid dm_crypt dm_mod sg sd_mod crc_t10dif crc32c_intel ghash_clmulni_intel ahci libahci libata scsi_mod aesni_intel ehci_pci ehci_hcd xhci_hcd(-) aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper e1000e ptp sdhci_pci pps_core sdhci mmc_core thermal thermal_sys usbcore usb_common
[ 1260.048926] CPU: 2 PID: 20024 Comm: rmmod Tainted: G W 3.11-rc4-amd64 #1 Debian 3.11~rc4-1~exp1
[ 1260.048971] Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET82WW (2.02 ) 09/11/2012
[ 1260.049005] task: ffff880186a23800 ti: ffff88018bb1a000 task.ti: ffff88018bb1a000
[ 1260.049039] RIP: 0010:[<ffffffffa0150b8c>] [<ffffffffa0150b8c>] xhci_mem_cleanup+0x376/0x410 [xhci_hcd]
[ 1260.049090] RSP: 0018:ffff88018bb1bde0 EFLAGS: 00010293
[ 1260.049114] RAX: ffff8801e58162d0 RBX: ffff88021237b000 RCX: 0000000000000004
[ 1260.049148] RDX: 0000000000000000 RSI: ffff880211d340c8 RDI: 0000000000000000
[ 1260.049183] RBP: ffff88021237b0c8 R08: 0000000000000000 R09: ffff880211d34018
[ 1260.049217] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000008
[ 1260.049248] R13: ffff88021237b0d0 R14: 0000000000000282 R15: 0000000000000800
[ 1260.049282] FS: 00007f97f9bae700(0000) GS:ffff88021e280000(0000) knlGS:0000000000000000
[ 1260.049317] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1260.049345] CR2: 0000000000000008 CR3: 000000018682c000 CR4: 00000000001407e0
[ 1260.049376] Stack:
[ 1260.049387] ffff8802126e8600 ffff8802126e86a8 ffff880215622098 00007fff5b8de8c1
[ 1260.049426] 00007f97fa50f090 ffffffffa000d7cd 0000000000000000 ffff8802126e8600
[ 1260.049467] ffff880215622000 ffffffffa001a25d ffff88021237b000 ffff880215622000
[ 1260.049497] Call Trace:
[ 1260.049517] [<ffffffffa000d7cd>] ? usb_remove_hcd+0xd6/0x12b [usbcore]
[ 1260.049546] [<ffffffffa001a25d>] ? usb_hcd_pci_remove+0xa9/0x122 [usbcore]
[ 1260.049574] [<ffffffffa01568b6>] ? xhci_pci_remove+0x37/0x41 [xhci_hcd]
[ 1260.049600] [<ffffffff811edd6c>] ? pci_device_remove+0x38/0x83
[ 1260.049624] [<ffffffff81286159>] ? __device_release_driver+0x80/0xd6
[ 1260.049649] [<ffffffff812868ae>] ? driver_detach+0x70/0x9b
[ 1260.049671] [<ffffffff81286026>] ? bus_remove_driver+0x68/0xa8
[ 1260.049694] [<ffffffff811ed8dd>] ? pci_unregister_driver+0x17/0x78
[ 1260.049720] [<ffffffff8108a3e2>] ? SyS_delete_module+0x1cf/0x253
[ 1260.049743] [<ffffffff810651be>] ? should_resched+0x5/0x23
[ 1260.049765] [<ffffffff8138ee18>] ? page_fault+0x28/0x30
[ 1260.049785] [<ffffffff81393d29>] ? system_call_fastpath+0x16/0x1b
[ 1260.049806] Code: eb 49 48 69 c2 b0 02 00 00 31 c9 48 03 83 10 09 00 00 4c 8d 48 18 48 63 c1 48 6b c0 28 49 8d 74 01 10 eb 15 4c 8b 00 48 8b 78 08 <49> 89 78 08 4c 89 07 48 89 00 48 89 40 08 48 8b 06 48 39 f0 75
[ 1260.049937] RIP [<ffffffffa0150b8c>] xhci_mem_cleanup+0x376/0x410 [xhci_hcd]
[ 1260.049966] RSP <ffff88018bb1bde0>
[ 1260.049979] CR2: 0000000000000008
[ 1260.055362] ---[ end trace f144bdfb3128ec1c ]---
