On Sun, Aug 11, 2013 at 07:02:57PM -0700, Greg Kroah-Hartman wrote: > On Sun, Aug 11, 2013 at 08:08:26PM +0100, Mark Brown wrote: > > I know there's been some discussion of this topic but do we have any > > general consensus on how to handle such things both from a Linux driver > > model point of view and from a DT/ACPI point of view? > As these are usually bus-specific things, and really, platform-specific I don't think they're bus specific - the main issue with a lot of this is that they're outside the infrastructure that the bus standardises so we should have a general way of understanding this. There will be bits where the bus needs to get involved but the overall pattern is generic. > things, I'd fall back and just recommend a "platform driver" that > "knows" about where these gpios are, and how/when to enable them, which > will cause the discoverable bus logic to kick in now that it notices a > device is present/removed. This doesn't work in general. These things aren't really platform specific at all, they're features of the devices that apply to any system using them and while for some use cases (like WiFi and BT power) an external thing that just manually applies power will be enough in other cases we want to know about the device even while it's off and the driver might be able to do extra things at runtime if it knows about for example having some control over signals to the device. For example in the Slimbus case we're normally talking about audio CODECs. In order to preserve the userspace API the device has to appear to be present at all times, the driver will remember the settings the user is making to be applied when it actually powers up and indeed the powering up should be kicked off as a result of userspac acting on the apparently present device. Another example here (including USB devices) is interrupt signals wired directly back to the processor, completely outside of the bus. > Perhaps a semi-generic "platform" driver could be created, that knows > how to handle these settings in the DT, but odds are, that might be > difficult to make generic enough to cover a wide range of boards, but > without specifics, it's hard to tell. There's things like the rfkill stuff already, and the reset controller on the way, but again this only covers a fairly small subset of the issues.
Attachment:
signature.asc
Description: Digital signature
