Please recompile your kernel with CONFIG_USB_DEBUG and CONFIG_USB_XHCI_HCD_DEBUGGING turned on, and email dmesg from when you first plug in the device, to when it fails. Thanks, Sarah Sharp On Thu, Aug 01, 2013 at 07:41:27PM +0200, Yannik Völker wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi, I was told to message you about this issue: > I own an Gigaset USB Adapter 108 which uses the ar5523 chipset, > support for that should have been added in 3.8, i am using > uname -a > Linux Hostname 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST > 2013 x86_64 GNU/Linux > right now. > It is not the firmwares fault, its not even getting touched at all. > The device is not broken either, i have tested it on another computer > running 32 bit windows. Its not a broken USB port as i have tired > several ones. > > When plugging it in the following lines appear in dmesg: > [12482.680674] usb 8-6: USB disconnect, device number 7 > [12486.112103] usb 8-6: new high-speed USB device number 8 using ehci-pci > [12488.235438] usb 8-6: timeout waiting for command 01 reply > [12488.235444] usb 8-6: could not initialize adapter > [12488.235643] usb 8-6: RX USB error -2. > [12488.235652] usb 8-6: error -1 when submitting rx urb > [12488.235748] ar5523: probe of 8-6:1.0 failed with error -110 > > I was told that -110 means not enough power which seems unlikely as > this is an Desktop computer, and I had it running on this exact > computer using ndiswrapper and an 32 bit kernel. > The specifications do not state extremly high Values either > (Webarchive as the original website is gone) > http://web.archive.org/web/20100808072407/http://gigaset.com/hq/en/product/GIGASETUSBADAPTER108.html?tab=data > "Power Consumption during operation: TX: 475mA, RX:290mA, Power > Consumption during standby: 330mA" > > So I thought that this might be a bug in the usb subsystem > > If there is any more information I can provide: just tell me. > - -- > Yannik Völker > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v2.0.20 (GNU/Linux) > > iQIcBAEBAgAGBQJR+p3HAAoJEDqk81AiCyXKOnQP/176oGAmmpD6qTqY5msqBlwu > xsYFsqrLRWgU26MiapKS6JAeel/F5ylzdeSePT/QxxFwV7468UBQSuR4H6nla0U4 > DVrOtjMEB+0PfNTNjUbPTmoYAvbDMPO5psDav9RPwl/j0BxyPBQwpAffLSXqmuxD > SMi1woHvqW6DtqWpULHz+30rYKNzjDlUMkzCCenvFVaIWznqUAYFjuiRJdmiFSKF > Ugqz+lU3wQTY+yFdxuLrA0MBC+WuhsaSYQhS7ZIx3RxgoatwZyPSwIBH6zCTChCm > GZLmQ9IVVfL8FnGFdxgbvYv8R5pmjANXjcn6lCQoAePHqgR8c9xBrDCl1z2om/EO > 28xbyvYiyUOy0uXJTLizSLmceL3IrPMRzgPeRc9yfxb5CtmR9kC/ygKG4JB/7Cnz > Cqf+nwqS0y8oA2t6kPKHH5SmCPyOr/kj0K9l6kq/fvLLCR63xa1UWwm2hzjL+2NY > ZMUFCsuwJjT3ULVie/rQEVIEt0b+51UGPqqH2Kf6FVJDcAqIubXl6KEqgNzjgoPW > DS3arYnEOvOE0u0iOkpTYfmX6iljJKZe+F2wQui0+CdLbCHY2rPyIC3NUJfMPY1U > BNi3UgbFO1SoBw5xQXn81AjWBYY7G4lDIhmPdrloLyhqOe4NsURFDJVbofT5GEZE > xzOuhmVm2XzaiKCMr/LZ > =KGhV > -----END PGP SIGNATURE----- -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
