This fixes an issue where the bulk-in urb used for incoming data transfer
is not resubmitted if the packet recieved contains an error status. This
results in the driver locking until the port is closed and re-opened.
Tested on a custom board with a Cinterion GSM module.
Signed-off-by: Matt Burtch <matt@xxxxxxxxxxxx>
---
drivers/usb/serial/usb_wwan.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 8257d30..9eefc33 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -291,18 +291,18 @@ static void usb_wwan_indat_callback(struct urb *urb)
tty_flip_buffer_push(&port->port);
} else
dev_dbg(dev, "%s: empty read urb received\n", __func__);
-
- /* Resubmit urb so we continue receiving */
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err) {
- if (err != -EPERM) {
- dev_err(dev, "%s: resubmit read urb failed. (%d)\n", __func__, err);
- /* busy also in error unless we are killed */
- usb_mark_last_busy(port->serial->dev);
- }
- } else {
+ }
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err) {
+ if (err != -EPERM) {
+ dev_err(dev, "%s: resubmit read urb failed. (%d)\n",
+ __func__, err);
+ /* busy also in error unless we are killed */
usb_mark_last_busy(port->serial->dev);
}
+ } else {
+ usb_mark_last_busy(port->serial->dev);
}
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
