Now that the divisor based baud rate encoding method has been fixed and extended, it can also be used for baud rates < 115200 baud with HX chips. This makes it possible to adjust the baud rate almost continuously instead of just beeing able to select between 16 fixed standard values. Tested with a PL2303HX 04463A (week 46, 2004, rev 3A). Signed-off-by: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx> --- drivers/usb/serial/pl2303.c | 2 +- 1 Datei geändert, 1 Zeile hinzugefügt(+), 1 Zeile entfernt(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 61c9f9d..09fb55c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -395,7 +395,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty, * 2) Divisor based method: encodes a divisor to a base value (12MHz*32) * => supported by HX chips (and likely not by type_0/1 chips) */ - if (type != HX || baud <= 115200) + if (type != HX) baud = pl2303_baudrate_encode_direct(baud, type, buf); else baud = pl2303_baudrate_encode_divisor(baud, type, buf); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
