Linux Serial

• Date Index

• [PATCH v4 4/8] serial: core: move sanitizing of RS485 delays into own function, (continued)
  • [PATCH v4 4/8] serial: core: move sanitizing of RS485 delays into own function, Lino Sanfilippo
  • Re: [PATCH v4 0/8] Fixes and cleanup for RS485, Andy Shevchenko
    • Re: [PATCH v4 0/8] Fixes and cleanup for RS485, Lino Sanfilippo
• [PATCH v3 0/8] Fixes and cleanup for RS485, Lino Sanfilippo
  • [PATCH v3 5/8] serial: core: sanitize RS485 delays read from device tree, Lino Sanfilippo
  • [PATCH v3 1/8] serial: ar933x: Fix check for RS485 support, Lino Sanfilippo
  • [PATCH v3 4/8] serial: core: move sanitizing of RS485 delays into own function, Lino Sanfilippo
  • [PATCH v3 2/8] serial: ar933x: Remove superfluous code in ar933x_config_rs485(), Lino Sanfilippo
  • [PATCH v3 8/8] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags, Lino Sanfilippo
  • [PATCH v3 7/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags, Lino Sanfilippo
  • [PATCH v3 6/8] dt_bindings: rs485: Correct delay values, Lino Sanfilippo
  • [PATCH v3 3/8] serial: core, 8250: set RS485 termination gpio in serial core, Lino Sanfilippo
    • Re: [PATCH v3 3/8] serial: core, 8250: set RS485 termination gpio in serial core, kernel test robot
• [tty:tty-linus] BUILD SUCCESS a501ab75e7624d133a5a3c7ec010687c8b961d23, kernel test robot
• [tty:tty-testing] BUILD SUCCESS 7e5b4322cde067e1d0f1bf8f490e93f664a7c843, kernel test robot
• [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, shenwei . wang
  • Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Greg KH
    • RE: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Shenwei Wang
  • Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Greg KH
    • RE: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Shenwei Wang
      • Re: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Greg KH
        • RE: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Shenwei Wang
          • Re: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Greg KH
            • RE: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Shenwei Wang
              • Re: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Greg KH
  • Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, Greg KH
• [PATCH 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode, shenwei . wang
• PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Todd Brandt
  • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Todd Brandt
    • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), John Ogness
      • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Todd Brandt
        • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), John Ogness
          • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Andy Shevchenko
            • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), John Ogness
              • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Petr Mladek
                • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Sergey Senozhatsky
                  • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), John Ogness
                    • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Todd Brandt
                    • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Todd Brandt
                      • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Todd Brandt
                        • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), John Ogness
                          • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), John Ogness
                          • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), Todd Brandt
                            • Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue), John Ogness
• [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi
  • Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., kernel test robot
  • Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., kernel test robot
  • Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Greg KH
    • Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi
  • Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., kernel test robot
• [PATCH 0/7] ftdi_sio driver improvements, Marek Behún
  • [PATCH 5/7] USB: serial: ftdi_sio: Fix baudrate rounding for ASYNC_SPD_CUST, Marek Behún
    • Re: [PATCH 5/7] USB: serial: ftdi_sio: Fix baudrate rounding for ASYNC_SPD_CUST, Greg Kroah-Hartman
      • Re: [PATCH 5/7] USB: serial: ftdi_sio: Fix baudrate rounding for ASYNC_SPD_CUST, Marek Behún
        • Re: [PATCH 5/7] USB: serial: ftdi_sio: Fix baudrate rounding for ASYNC_SPD_CUST, Greg Kroah-Hartman
  • [PATCH 1/7] USB: serial: ftdi_sio: Fix divisor overflow, Marek Behún
    • Re: [PATCH 1/7] USB: serial: ftdi_sio: Fix divisor overflow, Greg Kroah-Hartman
      • Re: [PATCH 1/7] USB: serial: ftdi_sio: Fix divisor overflow, Marek Behún
        • Re: [PATCH 1/7] USB: serial: ftdi_sio: Fix divisor overflow, Greg Kroah-Hartman
  • [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error, Marek Behún
    • Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error, Greg Kroah-Hartman
      • Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error, Marek Behún
        • Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error, Greg Kroah-Hartman
    • Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error, Andy Shevchenko
      • Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error, m . brock
        • Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error, Marek Behún
      • Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error, Marek Behún
  • [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function, Marek Behún
    • Re: [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function, Greg Kroah-Hartman
      • Re: [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function, Marek Behún
    • Re: [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function, Greg Kroah-Hartman
      • Re: [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function, Marek Behún
  • [PATCH 2/7] USB: serial: ftdi_sio: Add missing baudrate validation, Marek Behún
    • Re: [PATCH 2/7] USB: serial: ftdi_sio: Add missing baudrate validation, Greg Kroah-Hartman
      • Re: [PATCH 2/7] USB: serial: ftdi_sio: Add missing baudrate validation, Marek Behún
        • Re: [PATCH 2/7] USB: serial: ftdi_sio: Add missing baudrate validation, Greg Kroah-Hartman
  • [PATCH 7/7] USB: serial: ftdi_sio: Fill c_*speed fields with real baudrate, Marek Behún
    • Re: [PATCH 7/7] USB: serial: ftdi_sio: Fill c_*speed fields with real baudrate, Greg Kroah-Hartman
  • [PATCH 6/7] USB: serial: ftdi_sio: Fix custom_divisor and c_*speed for ASYNC_SPD_CUST, Marek Behún
  • Re: [PATCH 0/7] ftdi_sio driver improvements, Greg Kroah-Hartman
• [PATCH v2 1/4] tty: n_gsm: fix wrong T1 retry count handling, D. Starke
  • [PATCH v2 2/4] tty: n_gsm: fix DM command, D. Starke
  • [PATCH v2 4/4] tty: n_gsm: fix missing corner cases in gsmld_poll(), D. Starke
  • [PATCH v2 3/4] tty: n_gsm: fix flow control handling in tx path, D. Starke
• [PATCH 1/2] tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push(), Jiri Slaby
  • [PATCH 2/2] tty: use new tty_insert_flip_string_and_push_buffer() in pty_write(), Jiri Slaby
• [RESEND PATCH 8/8] tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA, William Zhang
  • Re: [RESEND PATCH 8/8] tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA, Florian Fainelli
  • Re: [RESEND PATCH 8/8] tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA, Florian Fainelli
• [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0, kernel test robot
  • Re: [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0, Greg KH
    • Re: [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0, Chen, Rong A
    • Re: [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0, Guenter Roeck
      • Re: [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0, Dan Carpenter
• Re: [PATCH 4/4] tty: n_gsm: fix missing corner cases in gsmld_poll(), Jiri Slaby
  • <Possible follow-ups>
  • RE: [PATCH 4/4] tty: n_gsm: fix missing corner cases in gsmld_poll(), Starke, Daniel
    • Re: [PATCH 4/4] tty: n_gsm: fix missing corner cases in gsmld_poll(), Jiri Slaby
• [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Tomer Maimon
  • [PATCH v7 01/16] dt-bindings: timer: npcm: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v7 02/16] dt-bindings: watchdog: npcm: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v7 16/16] arm64: defconfig: Add Nuvoton NPCM family support, Tomer Maimon
  • [PATCH v7 08/16] dt-bindings: reset: npcm: Add support for NPCM8XX, Tomer Maimon
  • [PATCH v7 10/16] dt-bindings: arm: npcm: Add maintainer, Tomer Maimon
  • [PATCH v7 15/16] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree, Tomer Maimon
  • [PATCH v7 07/16] reset: npcm: using syscon instead of device data, Tomer Maimon
  • [PATCH v7 04/16] clk: npcm8xx: add clock controller, Tomer Maimon
  • [PATCH v7 03/16] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock, Tomer Maimon
  • [PATCH v7 13/16] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC, Tomer Maimon
  • [PATCH v7 14/16] arm64: dts: nuvoton: Add initial NPCM8XX device tree, Tomer Maimon
  • [PATCH v7 11/16] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string, Tomer Maimon
  • [PATCH v7 09/16] reset: npcm: Add NPCM8XX support, Tomer Maimon
  • [PATCH v7 06/16] ARM: dts: nuvoton: add reset syscon property, Tomer Maimon
  • [PATCH v7 05/16] dt-bindings: reset: npcm: add GCR syscon property, Tomer Maimon
  • [PATCH v7 12/16] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string, Tomer Maimon
  • Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Joel Stanley
    • Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Arnd Bergmann
      • Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Arnd Bergmann
        • Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Tomer Maimon
          • Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Arnd Bergmann
• [PATCH] Revert "kernfs: Change kernfs_notify_list to llist.", Imran Khan
  • Re: [PATCH] Revert "kernfs: Change kernfs_notify_list to llist.", Andy Shevchenko
• [PATCH 0/9] arm: bcmbca: Move BCM63138 SoC support under ARCH_BCMBCA, William Zhang
  • [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA, William Zhang
    • Re: [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA, Wolfram Sang
    • Re: [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA, Damien Le Moal
    • Re: [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA, Vinod Koul
• [PATCH tty-next] MIPS: ath79: Remove one of the identical args in early_printk, Ilpo Järvinen
• [PATCH 0/2] serial: RS485 termination improvements, Ilpo Järvinen
  • [PATCH 1/2] serial: Embed rs485_supported to uart_port, Ilpo Järvinen
    • Re: [PATCH 1/2] serial: Embed rs485_supported to uart_port, Lino Sanfilippo
  • [PATCH 2/2] serial: RS485 termination is supported if DT provides one, Ilpo Järvinen
    • Re: [PATCH 2/2] serial: RS485 termination is supported if DT provides one, Lino Sanfilippo
• [PATCH v2] serial: 8250_fsl: Don't report FE, PE and OE twice, Uwe Kleine-König
• [PATCH v2 0/9] Fixes and cleanup for RS485, Lino Sanfilippo
  • [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported, Lino Sanfilippo
    • Re: [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported, Andy Shevchenko
      • Re: [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported, Lino Sanfilippo
    • Re: [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported, Ilpo Järvinen
      • Re: [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported, Lino Sanfilippo
  • [PATCH v2 5/9] dt_bindings: rs485: Correct delay values, Lino Sanfilippo
    • Re: [PATCH v2 5/9] dt_bindings: rs485: Correct delay values, Andy Shevchenko
    • Re: [PATCH v2 5/9] dt_bindings: rs485: Correct delay values, Rob Herring
  • [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core, Lino Sanfilippo
    • Re: [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core, Andy Shevchenko
      • Re: [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core, Lino Sanfilippo
    • Re: [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core, Ilpo Järvinen
      • Re: [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core, Lino Sanfilippo
  • [PATCH v2 9/9] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags, Lino Sanfilippo
  • [PATCH v2 6/9] serial: 8250_dwlib: remove redundant sanity check for RS485 flags, Lino Sanfilippo
  • [PATCH v2 7/9] serial: ar933x: Fix check for RS485 support, Lino Sanfilippo
    • Re: [PATCH v2 7/9] serial: ar933x: Fix check for RS485 support, Andy Shevchenko
      • Re: [PATCH v2 7/9] serial: ar933x: Fix check for RS485 support, Lino Sanfilippo
        • Re: [PATCH v2 7/9] serial: ar933x: Fix check for RS485 support, Ilpo Järvinen
  • [PATCH v2 4/9] serial: core: sanitize RS485 delays read from device tree, Lino Sanfilippo
    • Re: [PATCH v2 4/9] serial: core: sanitize RS485 delays read from device tree, Andy Shevchenko
      • Re: [PATCH v2 4/9] serial: core: sanitize RS485 delays read from device tree, Lino Sanfilippo
  • [PATCH v2 3/9] serial: core: move sanitizing of RS485 delays into own function, Lino Sanfilippo
  • [PATCH v2 8/9] serial: ar933x: Remove redundant assignment in rs485_config, Lino Sanfilippo
• [tty:tty-testing] BUILD SUCCESS 7349660438603ed19282e75949561406531785a5, kernel test robot
• Re: [linux-next:master] BUILD REGRESSION 6cc11d2a1759275b856e464265823d94aabd5eaf, Roman Gushchin
• [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Imran Khan
  • Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Tejun Heo
    • Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Imran Khan
      • Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Tejun Heo
        • Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Imran Khan
          • Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Tejun Heo
  • Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Andy Shevchenko
• [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Imran Khan
  • Re: [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Nathan Chancellor
    • Re: [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Imran Khan
      • Re: [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Greg KH
      • Re: [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list., Nathan Chancellor
• [PATCH v5 1/2] tty: n_gsm: fix deadlock and link starvation in outgoing data path, D. Starke
  • [PATCH v5 2/2] tty: n_gsm: fix resource allocation order in gsm_activate_mux(), D. Starke
• [PATCH V2 00/30] OPP: Add new configuration interface: dev_pm_opp_set_config(), Viresh Kumar
  • [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config(), Viresh Kumar
    • Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config(), Greg Kroah-Hartman
      • Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config(), Viresh Kumar
        • Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config(), Greg Kroah-Hartman
          • Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config(), Viresh Kumar
            • Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config(), Greg Kroah-Hartman
              • Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config(), Viresh Kumar
                • Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config(), Greg Kroah-Hartman
                  • Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config(), Viresh Kumar
• [PATCH v4 1/9] tty: n_gsm: fix user open not possible at responder until initiator open, D. Starke
  • [PATCH v4 8/9] tty: n_gsm: fix resource allocation order in gsm_activate_mux(), D. Starke
  • [PATCH v4 5/9] tty: n_gsm: fix non flow control frames during mux flow off, D. Starke
  • [PATCH v4 2/9] tty: n_gsm: fix tty registration before control channel open, D. Starke
  • [PATCH v4 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path, D. Starke
  • [PATCH v4 9/9] tty: n_gsm: fix race condition in gsmld_write(), D. Starke
  • [PATCH v4 4/9] tty: n_gsm: fix missing timer to handle stalled links, D. Starke
  • [PATCH v4 3/9] tty: n_gsm: fix wrong queuing behavior in gsm_dlci_data_output(), D. Starke
  • [PATCH v4 7/9] tty: n_gsm: fix packet re-transmission without open control channel, D. Starke
  • Re: [PATCH v4 1/9] tty: n_gsm: fix user open not possible at responder until initiator open, Greg KH
• [tty:tty-testing] BUILD SUCCESS c8177f90b7c618042e8dd19c87307cf29a7dc275, kernel test robot
• [tty:tty-linus] BUILD SUCCESS b941e487152e0909ef43faacae6eeee266d9b378, kernel test robot
• Questions about usb to serial driver, Neal Liu
  • Re: Questions about usb to serial driver, gregkh@xxxxxxxxxxxxxxxxxxx
    • RE: Questions about usb to serial driver, Neal Liu
      • Re: Questions about usb to serial driver, gregkh@xxxxxxxxxxxxxxxxxxx
        • RE: Questions about usb to serial driver, Neal Liu
• [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set, Saravana Kannan
  • [PATCH v2 1/2] driver core: Add probe_no_timeout flag for drivers, Saravana Kannan
  • [PATCH v2 2/2] serial: Set probe_no_timeout for all DT based drivers, Saravana Kannan
    • Re: [PATCH v2 2/2] serial: Set probe_no_timeout for all DT based drivers, Andy Shevchenko
  • Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set, Greg Kroah-Hartman
    • Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set, Saravana Kannan
    • Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set, Olof Johansson
      • Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set, Greg Kroah-Hartman
        • Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set, Olof Johansson
          • Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set, Rob Herring
            • Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set, Andy Shevchenko
              • Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set, Greg Kroah-Hartman
• [PATCH 1/2] serial: sh-sci: fix missing sci_cleanup_single() in sci_probe_single(), Yang Yingliang
  • [PATCH 2/2] serial: sh-sci: fix missing uart_unregister_driver() in sci_probe_single(), Yang Yingliang
    • Re: [PATCH 2/2] serial: sh-sci: fix missing uart_unregister_driver() in sci_probe_single(), Greg KH
      • Re: [PATCH 2/2] serial: sh-sci: fix missing uart_unregister_driver() in sci_probe_single(), Yang Yingliang
  • Re: [PATCH 1/2] serial: sh-sci: fix missing sci_cleanup_single() in sci_probe_single(), Greg KH
    • Re: [PATCH 1/2] serial: sh-sci: fix missing sci_cleanup_single() in sci_probe_single(), Yang Yingliang
  • Re: [PATCH 1/2] serial: sh-sci: fix missing sci_cleanup_single() in sci_probe_single(), Geert Uytterhoeven
• Regression for duplicate (?) console parameters on next-20220630, Michael Walle
  • Re: Regression for duplicate (?) console parameters on next-20220630, Nathan Chancellor
    • Re: Regression for duplicate (?) console parameters on next-20220630, Michael Walle
      • Re: Regression for duplicate (?) console parameters on next-20220630, Imran Khan
• [PATCH v6 00/17] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Tomer Maimon
  • [PATCH v6 15/17] arm64: dts: nuvoton: Add initial NPCM8XX device tree, Tomer Maimon
  • [PATCH v6 03/17] dt-bindings: watchdog: npcm: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v6 12/17] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string, Tomer Maimon
  • [PATCH v6 09/17] dt-bindings: reset: npcm: Add support for NPCM8XX, Tomer Maimon
  • [PATCH v6 06/17] dt-bindings: reset: npcm: add GCR syscon property, Tomer Maimon
  • [PATCH v6 05/17] clk: npcm8xx: add clock controller, Tomer Maimon
  • [PATCH v6 07/17] ARM: dts: nuvoton: add reset syscon property, Tomer Maimon
  • [PATCH v6 04/17] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock, Tomer Maimon
  • [PATCH v6 13/17] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string, Tomer Maimon
  • [PATCH v6 02/17] dt-bindings: serial: 8250: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v6 08/17] reset: npcm: using syscon instead of device data, Tomer Maimon
    • Re: [PATCH v6 08/17] reset: npcm: using syscon instead of device data, Philipp Zabel
      • Re: [PATCH v6 08/17] reset: npcm: using syscon instead of device data, Tomer Maimon
        • Re: [PATCH v6 08/17] reset: npcm: using syscon instead of device data, Philipp Zabel
  • [PATCH v6 11/17] dt-bindings: arm: npcm: Add maintainer, Tomer Maimon
  • [PATCH v6 17/17] arm64: defconfig: Add Nuvoton NPCM family support, Tomer Maimon
  • [PATCH v6 10/17] reset: npcm: Add NPCM8XX support, Tomer Maimon
  • [PATCH v6 16/17] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree, Tomer Maimon
  • [PATCH v6 14/17] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC, Tomer Maimon
  • [PATCH v6 01/17] dt-bindings: timer: npcm: Add npcm845 compatible string, Tomer Maimon
• [PATCH v3 1/1] serial: 8250_dw: Drop PM ifdeffery, Andy Shevchenko
• [PATCH 1/1] 8250_dwlib: Convert bitops to newer form, Ilpo Järvinen
  • Re: [PATCH 1/1] 8250_dwlib: Convert bitops to newer form, Andy Shevchenko
    • Re: [PATCH 1/1] 8250_dwlib: Convert bitops to newer form, Ilpo Järvinen
• [PATCH v1 1/1] serial: 8250_dw: Sort headers alphabetically, Andy Shevchenko
  • Re: [PATCH v1 1/1] serial: 8250_dw: Sort headers alphabetically, Ilpo Järvinen
  • Re: [PATCH v1 1/1] serial: 8250_dw: Sort headers alphabetically, Greg Kroah-Hartman
• [PATCH v2 1/1] serial: 8250_dw: Drop PM ifdeffery, Andy Shevchenko
  • Re: [PATCH v2 1/1] serial: 8250_dw: Drop PM ifdeffery, Ilpo Järvinen
• [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Biju Das
  • RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Phil Edworthy
  • Re: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Jiri Slaby
    • RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Biju Das
      • RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Biju Das
        • Re: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Andy Shevchenko
          • RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Biju Das
          • Re: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Serge Semin
            • RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Biju Das
              • Re: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST, Serge Semin
• [PATCH v2] serial: 8250_bcm7271: Save/restore RTS in suspend/resume, Florian Fainelli
  • Re: [PATCH v2] serial: 8250_bcm7271: Save/restore RTS in suspend/resume, Greg Kroah-Hartman
  • Re: [PATCH v2] serial: 8250_bcm7271: Save/restore RTS in suspend/resume, Jiri Slaby
    • Re: [PATCH v2] serial: 8250_bcm7271: Save/restore RTS in suspend/resume, Florian Fainelli
• [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi
  • Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Doug Anderson
    • RE: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi (Temp) (QUIC)
      • Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Doug Anderson
        • RE: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi (Temp)
          • Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Doug Anderson
            • Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi
              • Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Doug Anderson
                • Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi
  • Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Greg KH
    • RE: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi (Temp) (QUIC)
      • Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Doug Anderson
  • Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., kernel test robot
• [PATCH v2] serial: 8250: Fix PM usage_count for console handover, Ilpo Järvinen
• [PATCH] serial: Fix spelling mistake, Zhang Jiaming
  • Re: [PATCH] serial: Fix spelling mistake, Ilpo Järvinen
• Re: [PATCH 6/6] i2c: Make remove callback return void, Uwe Kleine-König
  • Re: [PATCH 6/6] i2c: Make remove callback return void, Javier Martinez Canillas
  • Re: [PATCH 6/6] i2c: Make remove callback return void, Christophe Leroy
    • Re: [PATCH 6/6] i2c: Make remove callback return void, Javier Martinez Canillas
  • <Possible follow-ups>
  • Re: [PATCH 6/6] i2c: Make remove callback return void, Heikki Krogerus
  • Re: [PATCH 6/6] i2c: Make remove callback return void, Andy Shevchenko
  • Re: [PATCH 6/6] i2c: Make remove callback return void, Uwe Kleine-König
  • Re: [PATCH 6/6] i2c: Make remove callback return void, Maximilian Luz
  • Re: [PATCH 6/6] i2c: Make remove callback return void, Luca Ceresoli
  • Re: [PATCH 6/6] i2c: Make remove callback return void, Jean Delvare
    • Re: [PATCH 6/6] i2c: Make remove callback return void, Uwe Kleine-König
  • Re: [PATCH 6/6] i2c: Make remove callback return void, Vladimir Oltean
    • Re: [PATCH 6/6] i2c: Make remove callback return void, Uwe Kleine-König
• [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports, Chanho Park
  • Re: [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports, Krzysztof Kozlowski
  • Re: [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports, Hector Martin
  • Re: [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports, Jiri Slaby
    • RE: [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports, Chanho Park
• [PATCH v3] tty: serial: samsung_tty: loopback mode support, Chanho Park
  • Re: [PATCH v3] tty: serial: samsung_tty: loopback mode support, Marek Szyprowski
    • RE: [PATCH v3] tty: serial: samsung_tty: loopback mode support, Chanho Park
      • Re: [PATCH v3] tty: serial: samsung_tty: loopback mode support, Marek Szyprowski
        • RE: [PATCH v3] tty: serial: samsung_tty: loopback mode support, Chanho Park
• [PATCH 0/2] BUG, more dw8259 ACPI crashes, Jeremy Linton
  • [PATCH 2/2] serial: 8250: dw: Fix NULL pointer dereference, Jeremy Linton
    • Re: [PATCH 2/2] serial: 8250: dw: Fix NULL pointer dereference, Ilpo Järvinen
  • [PATCH 1/2] Revert "serial: 8250: dw: Move the USR register to pdata", Jeremy Linton
    • Re: [PATCH 1/2] Revert "serial: 8250: dw: Move the USR register to pdata", Greg KH
      • Re: [PATCH 1/2] Revert "serial: 8250: dw: Move the USR register to pdata", Jeremy Linton
  • Re: [PATCH 0/2] BUG, more dw8259 ACPI crashes, Miquel Raynal
  • Re: [PATCH 0/2] BUG, more dw8259 ACPI crashes, Jeremy Linton
• [PATCH] serial: 8250_bcm7271: Save/restore RTS in suspend/resume, Florian Fainelli
  • Re: [PATCH] serial: 8250_bcm7271: Save/restore RTS in suspend/resume, Greg Kroah-Hartman
• [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery, Andy Shevchenko
  • Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery, Ilpo Järvinen
    • Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery, Andy Shevchenko
    • Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery, Paul Cercueil
      • Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery, Ilpo Järvinen
      • Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery, Andy Shevchenko
• [PATCH] serial: 8250: Fix PM usage_count for console handover, Ilpo Järvinen
  • Re: [PATCH] serial: 8250: Fix PM usage_count for console handover, Andy Shevchenko
    • Re: [PATCH] serial: 8250: Fix PM usage_count for console handover, Tony Lindgren
      • Re: [PATCH] serial: 8250: Fix PM usage_count for console handover, Ilpo Järvinen
        • Re: [PATCH] serial: 8250: Fix PM usage_count for console handover, Tony Lindgren
• [PATCH 0/4] serial: 8250_dw: Rework ->serial_out() & LCR retry logic, Ilpo Järvinen
  • [PATCH 2/4] serial: 8250_dw: Rename offset to reg_offset, Ilpo Järvinen
    • Re: [PATCH 2/4] serial: 8250_dw: Rename offset to reg_offset, Andy Shevchenko
      • Re: [PATCH 2/4] serial: 8250_dw: Rename offset to reg_offset, Ilpo Järvinen
        • Re: [PATCH 2/4] serial: 8250_dw: Rename offset to reg_offset, Andy Shevchenko
  • [PATCH 1/4] serial: 8250_dw: Use dw8250_serial_out() in dw8250_serial_out38x(), Ilpo Järvinen
  • [PATCH 3/4] serial: 8250_dw: Move 16550 compatible & LCR checks to dw8250_verify_write(), Ilpo Järvinen
    • Re: [PATCH 3/4] serial: 8250_dw: Move 16550 compatible & LCR checks to dw8250_verify_write(), Andy Shevchenko
  • [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic, Ilpo Järvinen
    • Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic, Andy Shevchenko
      • Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic, Ilpo Järvinen
        • Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic, Andy Shevchenko
          • Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic, Ilpo Järvinen
            • Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic, Andy Shevchenko
• [PATCH v2] tty: serial: samsung_tty: loopback mode support, Chanho Park
  • Re: [PATCH v2] tty: serial: samsung_tty: loopback mode support, Ilpo Järvinen
    • RE: [PATCH v2] tty: serial: samsung_tty: loopback mode support, Chanho Park
  • Re: [PATCH v2] tty: serial: samsung_tty: loopback mode support, Greg Kroah-Hartman
    • RE: [PATCH v2] tty: serial: samsung_tty: loopback mode support, Chanho Park
• [PATCH RESEND v2] earlycon: prevent multiple register_console(), Michael Walle
• [PATCH] serial: mvebu-uart: correctly report configured baudrate value, Pali Rohár
  • Re: [PATCH] serial: mvebu-uart: correctly report configured baudrate value, Ilpo Järvinen
    • Re: [PATCH] serial: mvebu-uart: correctly report configured baudrate value, Pali Rohár
• [PATCH] serial: mvebu: Apply old baudrate to termios, Ilpo Järvinen
  • Re: [PATCH] serial: mvebu: Apply old baudrate to termios, Pali Rohár
    • Re: [PATCH] serial: mvebu: Apply old baudrate to termios, Pali Rohár
      • Re: [PATCH] serial: mvebu: Apply old baudrate to termios, Andy Shevchenko
        • Re: [PATCH] serial: mvebu: Apply old baudrate to termios, Andy Shevchenko
          • Re: [PATCH] serial: mvebu: Apply old baudrate to termios, Pali Rohár
• [PATCH RESEND tty-next] serial: 8250_dw: Take port lock while accessing LSR, Ilpo Järvinen
  • Re: [PATCH RESEND tty-next] serial: 8250_dw: Take port lock while accessing LSR, Andy Shevchenko
• [PATCH v2 -next] serial: 8250: fix return error code in serial8250_request_std_resource(), Yi Yang
• [tty:tty-linus] BUILD SUCCESS ec5ad331680c96ef3dd30dc297b206988023b9e1, kernel test robot
• [PATCH v1 0/2] Fix console probe delay when stdout-path isn't set, Saravana Kannan
  • [PATCH v1 1/2] driver core: Add probe_no_timeout flag for drivers, Saravana Kannan
  • [PATCH v1 2/2] serial: Set probe_no_timeout for all DT based drivers, Saravana Kannan
    • Re: [PATCH v1 2/2] serial: Set probe_no_timeout for all DT based drivers, Tobias Klauser
      • Re: [PATCH v1 2/2] serial: Set probe_no_timeout for all DT based drivers, Saravana Kannan
  • Re: [PATCH v1 0/2] Fix console probe delay when stdout-path isn't set, Fabio Estevam
  • Re: [PATCH v1 0/2] Fix console probe delay when stdout-path isn't set, Andy Shevchenko
• [tty:tty-testing] BUILD SUCCESS f287f971e2569827fe9fb3a8d55a37703a13cf29, kernel test robot
• [PATCH] serial: stm32: Clear prev values before setting RTS delays, Ilpo Järvinen
• [PATCH] tty: serial: samsung_tty: support more than 4 uart ports, Chanho Park
  • Re: [PATCH] tty: serial: samsung_tty: support more than 4 uart ports, Krzysztof Kozlowski
    • Re: [PATCH] tty: serial: samsung_tty: support more than 4 uart ports, Greg Kroah-Hartman
      • RE: [PATCH] tty: serial: samsung_tty: support more than 4 uart ports, Chanho Park
• [PATCH] tty: serial: samsung_tty: set dma burst_size to 1, Chanho Park
  • Re: [PATCH] tty: serial: samsung_tty: set dma burst_size to 1, Krzysztof Kozlowski
• [PATCH] tty: serial: samsung_tty: loopback mode support, Chanho Park
  • Re: [PATCH] tty: serial: samsung_tty: loopback mode support, Ilpo Järvinen
    • RE: [PATCH] tty: serial: samsung_tty: loopback mode support, Chanho Park
  • Re: [PATCH] tty: serial: samsung_tty: loopback mode support, Krzysztof Kozlowski
  • Re: [PATCH] tty: serial: samsung_tty: loopback mode support, Greg Kroah-Hartman
    • RE: [PATCH] tty: serial: samsung_tty: loopback mode support, Chanho Park
• [PATCH v3 0/6] serial: A few cleanups, Ilpo Järvinen
  • [PATCH v3 4/6] serial: 8250: Use C99 array initializer & define UART_REG_UNMAPPED, Ilpo Järvinen
  • [PATCH v3 2/6] serial: msm: Rename UART_* defines to MSM_UART_*, Ilpo Järvinen
  • [PATCH v3 1/6] serial: msm: Convert container_of UART_TO_MSM to static inline, Ilpo Järvinen
  • [PATCH v3 6/6] serial: Consolidate BOTH_EMPTY use, Ilpo Järvinen
  • [PATCH v3 3/6] serial: Use bits for UART_LSR_BRK_ERROR_BITS/MSR_ANY_DELTA, Ilpo Järvinen
  • [PATCH v3 5/6] serial: Convert SERIAL_XMIT_SIZE to UART_XMIT_SIZE, Ilpo Järvinen
    • Re: [PATCH v3 5/6] serial: Convert SERIAL_XMIT_SIZE to UART_XMIT_SIZE, Jiri Slaby
• [PATCH v9 0/6] Add RS485 9th bit addressing mode support to DW UART, Ilpo Järvinen
  • [PATCH v9 2/6] serial: 8250: create lsr_save_mask, Ilpo Järvinen
  • [PATCH v9 4/6] serial: take termios_rwsem for ->rs485_config() & pass termios as param, Ilpo Järvinen
    • Re: [PATCH v9 4/6] serial: take termios_rwsem for ->rs485_config() & pass termios as param, Jiri Slaby
      • Re: [PATCH v9 4/6] serial: take termios_rwsem for ->rs485_config() & pass termios as param, Jiri Slaby
  • [PATCH v9 3/6] serial: 8250_lpss: Use 32-bit reads, Ilpo Järvinen
  • [PATCH v9 6/6] serial: 8250_dwlib: Support for 9th bit multipoint addressing, Ilpo Järvinen
  • [PATCH v9 5/6] serial: Support for RS-485 multipoint addresses, Ilpo Järvinen
    • Re: [PATCH v9 5/6] serial: Support for RS-485 multipoint addresses, Lukas Wunner
  • [PATCH v9 1/6] serial: 8250: make saved LSR larger, Ilpo Järvinen
    • Re: [PATCH v9 1/6] serial: 8250: make saved LSR larger, Andy Shevchenko
• Sending gnss data during suspend doesn't work, Mohamed Ali Fodha
  • Re: Sending gnss data during suspend doesn't work, Mohamed Ali Fodha
• [PATCH 1/1] dt-bindings: serial: snps-dw-apb-uart: Add Rockchip RK3588, Sebastian Reichel
• RE: [PATCH v3 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path, Starke, Daniel
  • Re: [PATCH v3 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path, Greg KH
  • <Possible follow-ups>
  • RE: [PATCH v3 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path, Starke, Daniel
    • Re: [PATCH v3 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path, Greg KH
• [PATCH 0/8] Fixes and cleanup for RS485, Lino Sanfilippo
  • [PATCH 7/8] serial: ar933x: Remove redundant assignment in rs485_config, Lino Sanfilippo
    • Re: [PATCH 7/8] serial: ar933x: Remove redundant assignment in rs485_config, Ilpo Järvinen
      • Re: [PATCH 7/8] serial: ar933x: Remove redundant assignment in rs485_config, Lino Sanfilippo
        • Re: [PATCH 7/8] serial: ar933x: Remove redundant assignment in rs485_config, Ilpo Järvinen
          • Re: [PATCH 7/8] serial: ar933x: Remove redundant assignment in rs485_config, Lino Sanfilippo
  • [PATCH 6/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags, Lino Sanfilippo
    • Re: [PATCH 6/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags, Ilpo Järvinen
  • [PATCH 8/8] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags, Lino Sanfilippo
    • Re: [PATCH 8/8] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags, Ilpo Järvinen
  • [PATCH 5/8] dt_bindings: rs485: Correct delay values, Lino Sanfilippo
    • Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values, Andy Shevchenko
      • Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values, Lino Sanfilippo
        • Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values, Ilpo Järvinen
          • Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values, Ilpo Järvinen
        • Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values, Andy Shevchenko
          • Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values, Lino Sanfilippo
  • [PATCH 4/8] serial: core: sanitize RS485 delays read from device tree, Lino Sanfilippo
    • Re: [PATCH 4/8] serial: core: sanitize RS485 delays read from device tree, Ilpo Järvinen
      • Re: [PATCH 4/8] serial: core: sanitize RS485 delays read from device tree, Lino Sanfilippo
  • [PATCH 3/8] serial: core: move sanitizing of RS485 delays into own function, Lino Sanfilippo
    • Re: [PATCH 3/8] serial: core: move sanitizing of RS485 delays into own function, Andy Shevchenko
      • Re: [PATCH 3/8] serial: core: move sanitizing of RS485 delays into own function, Lino Sanfilippo
    • Re: [PATCH 3/8] serial: core: move sanitizing of RS485 delays into own function, Ilpo Järvinen
  • [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Lino Sanfilippo
    • Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Andy Shevchenko
      • Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Lino Sanfilippo
        • Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Andy Shevchenko
          • Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Lino Sanfilippo
            • Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Andy Shevchenko
              • Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Lino Sanfilippo
    • Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Lukas Wunner
      • Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Ilpo Järvinen
        • Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported, Lino Sanfilippo
  • [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core, Lino Sanfilippo
    • Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core, Andy Shevchenko
      • Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core, Lino Sanfilippo
    • Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core, Ilpo Järvinen
      • Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core, Lino Sanfilippo
    • Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core, Lukas Wunner
      • Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core, Lino Sanfilippo
        • Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core, Ilpo Järvinen
• [PATCH v5 00/18] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Tomer Maimon
  • [PATCH v5 02/18] clocksource: timer-npcm7xx: Add NPCM845 timer support, Tomer Maimon
    • Re: [PATCH v5 02/18] clocksource: timer-npcm7xx: Add NPCM845 timer support, Arnd Bergmann
  • [PATCH v5 12/18] dt-bindings: arm: npcm: Add maintainer, Tomer Maimon
  • [PATCH v5 01/18] dt-bindings: timer: npcm: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v5 04/18] dt-bindings: watchdog: npcm: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v5 05/18] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock, Tomer Maimon
    • Re: [PATCH v5 05/18] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock, Krzysztof Kozlowski
  • [PATCH v5 07/18] dt-bindings: reset: npcm: add GCR syscon property, Tomer Maimon
  • [PATCH v5 06/18] clk: npcm8xx: add clock controller, Tomer Maimon
  • [PATCH v5 18/18] arm64: defconfig: Add Nuvoton NPCM family support, Tomer Maimon
  • [PATCH v5 09/18] reset: npcm: using syscon instead of device data, Tomer Maimon
  • [PATCH v5 08/18] ARM: dts: nuvoton: add reset syscon property, Tomer Maimon
  • [PATCH v5 03/18] dt-bindings: serial: 8250: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v5 10/18] dt-bindings: reset: npcm: Add support for NPCM8XX, Tomer Maimon
  • [PATCH v5 15/18] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC, Tomer Maimon
  • [PATCH v5 17/18] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree, Tomer Maimon
  • [PATCH v5 13/18] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string, Tomer Maimon
  • [PATCH v5 11/18] reset: npcm: Add NPCM8XX support, Tomer Maimon
  • [PATCH v5 16/18] arm64: dts: nuvoton: Add initial NPCM8XX device tree, Tomer Maimon
  • [PATCH v5 14/18] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string, Tomer Maimon
• [tty:tty-testing] BUILD SUCCESS df36f3e3fbb76d30d623a1623e31e3ce9c2fa750, kernel test robot
• [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi
  • Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., kernel test robot
  • Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Stephen Boyd
    • RE: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi (Temp) (QUIC)
  • Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., kernel test robot
  • Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Jiri Slaby
    • RE: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi (Temp) (QUIC)
  • Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Doug Anderson
    • RE: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate., Vijaya Krishna Nivarthi (Temp) (QUIC)
• [PATCH v4 00/18] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Tomer Maimon
  • [PATCH v4 09/18] reset: npcm: using syscon instead of device data, Tomer Maimon
  • [PATCH v4 17/18] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree, Tomer Maimon
  • [PATCH v4 06/18] clk: npcm8xx: add clock controller, Tomer Maimon
    • Re: [PATCH v4 06/18] clk: npcm8xx: add clock controller, Christophe JAILLET
      • Re: [PATCH v4 06/18] clk: npcm8xx: add clock controller, Tomer Maimon
  • [PATCH v4 08/18] ARM: dts: nuvoton: add reset syscon property, Tomer Maimon
  • [PATCH v4 07/18] dt-bindings: reset: npcm: add GCR syscon property, Tomer Maimon
    • Re: [PATCH v4 07/18] dt-bindings: reset: npcm: add GCR syscon property, Krzysztof Kozlowski
  • [PATCH v4 05/18] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock, Tomer Maimon
    • Re: [PATCH v4 05/18] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock, Krzysztof Kozlowski
      • Re: [PATCH v4 05/18] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock, Tomer Maimon
  • [PATCH v4 10/18] dt-bindings: reset: npcm: Add support for NPCM8XX, Tomer Maimon
  • [PATCH v4 18/18] arm64: defconfig: Add Nuvoton NPCM family support, Tomer Maimon
  • [PATCH v4 03/18] dt-bindings: serial: 8250: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v4 14/18] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string, Tomer Maimon
  • [PATCH v4 04/18] dt-bindings: watchdog: npcm: Add npcm845 compatible string, Tomer Maimon
    • Re: [PATCH v4 04/18] dt-bindings: watchdog: npcm: Add npcm845 compatible string, Guenter Roeck
  • [PATCH v4 16/18] arm64: dts: nuvoton: Add initial NPCM8XX device tree, Tomer Maimon
  • [PATCH v4 13/18] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string, Tomer Maimon
  • [PATCH v4 12/18] dt-bindings: arm: npcm: Add maintainer, Tomer Maimon
  • [PATCH v4 02/18] clocksource: timer-npcm7xx: Add NPCM845 timer support, Tomer Maimon
  • [PATCH v4 15/18] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC, Tomer Maimon
  • [PATCH v4 11/18] reset: npcm: Add NPCM8XX support, Tomer Maimon
  • [PATCH v4 01/18] dt-bindings: timer: npcm: Add npcm845 compatible string, Tomer Maimon
• [PATCH v2 0/6] serial: A few cleanups, Ilpo Järvinen
  • [PATCH v2 4/6] serial: 8250: Use C99 array initializer & define UART_REG_UNMAPPED, Ilpo Järvinen
    • Re: [PATCH v2 4/6] serial: 8250: Use C99 array initializer & define UART_REG_UNMAPPED, Jiri Slaby
  • [PATCH v2 1/6] serial: msm: Convert container_of UART_TO_MSM to static inline, Ilpo Järvinen
    • Re: [PATCH v2 1/6] serial: msm: Convert container_of UART_TO_MSM to static inline, Jiri Slaby
  • [PATCH v2 3/6] serial: Use bits for UART_LSR_BRK_ERROR_BITS/MSR_ANY_DELTA, Ilpo Järvinen
    • Re: [PATCH v2 3/6] serial: Use bits for UART_LSR_BRK_ERROR_BITS/MSR_ANY_DELTA, Jiri Slaby
  • [PATCH v2 2/6] serial: msm: Rename UART_* defines to MSM_UART_*, Ilpo Järvinen
    • Re: [PATCH v2 2/6] serial: msm: Rename UART_* defines to MSM_UART_*, Jiri Slaby
  • [PATCH v2 5/6] serial: Use UART_XMIT_SIZE, Ilpo Järvinen
    • Re: [PATCH v2 5/6] serial: Use UART_XMIT_SIZE, Jiri Slaby
      • Re: [PATCH v2 5/6] serial: Use UART_XMIT_SIZE, Ilpo Järvinen
  • [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use, Ilpo Järvinen
    • Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use, Jiri Slaby
      • Message not available
        • Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use, Jiri Slaby
          • Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use, Andy Shevchenko
            • Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use, Andy Shevchenko
              • Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use, Jiri Slaby
      • Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use, Ilpo Järvinen
• [PATCH v2] serial: 8250: dw: enable using pdata with ACPI, Marcin Wojtas
• [PATCH] serial: kgdboc: Fix typo in comment, Xiang wangx
• [PATCH 0/6] serial: A few cleanups, Ilpo Järvinen
  • [PATCH 1/6] serial: msm: Convert container_of UART_TO_MSM to static inline, Ilpo Järvinen
  • [PATCH 3/6] serial: Use bits for UART_LSR_BRK_ERROR_BITS/MSR_ANY_DELTA, Ilpo Järvinen
  • [PATCH 4/6] serial: 8250: Use C99 array initializer & define UART_REG_UNMAPPED, Ilpo Järvinen
  • [PATCH 2/6] serial: msm: Rename UART_* defines to MSM_UART_*, Ilpo Järvinen
  • [PATCH 5/6] cleanup: Use UART_XMIT_SIZE, Ilpo Järvinen
    • Re: [PATCH 5/6] cleanup: Use UART_XMIT_SIZE, Ilpo Järvinen
  • [PATCH 6/6] serial: Consolidate BOTH_EMPTY use, Ilpo Järvinen
• [PATCH -next] serial: 8250: fix return error code in serial8250_request_std_resource(), Yi Yang
  • Re: [PATCH -next] serial: 8250: fix return error code in serial8250_request_std_resource(), Ilpo Järvinen
    • Re: [PATCH -next] serial: 8250: fix return error code in serial8250_request_std_resource(), yiyang (D)
    • Re: [PATCH -next] serial: 8250: fix return error code in serial8250_request_std_resource(), Greg Kroah-Hartman
  • Re: [PATCH -next] serial: 8250: fix return error code in serial8250_request_std_resource(), Greg KH
• [PATCH v8 0/6] Add RS485 9th bit addressing mode support to DW UART, Ilpo Järvinen
  • [PATCH v8 1/6] serial: 8250: make saved LSR larger, Ilpo Järvinen
  • [PATCH v8 3/6] serial: 8250_lpss: Use 32-bit reads, Ilpo Järvinen
  • [PATCH v8 4/6] serial: take termios_rwsem for ->rs485_config() & pass termios as param, Ilpo Järvinen
  • [PATCH v8 2/6] serial: 8250: create lsr_save_mask, Ilpo Järvinen
  • [PATCH v8 5/6] serial: Support for RS-485 multipoint addresses, Ilpo Järvinen
    • Re: [PATCH v8 5/6] serial: Support for RS-485 multipoint addresses, Andy Shevchenko
      • Re: [PATCH v8 5/6] serial: Support for RS-485 multipoint addresses, Ilpo Järvinen
        • Re: [PATCH v8 5/6] serial: Support for RS-485 multipoint addresses, Andy Shevchenko
  • [PATCH v8 6/6] serial: 8250_dwlib: Support for 9th bit multipoint addressing, Ilpo Järvinen
• [PATCH v3 00/18] Introduce Nuvoton Arbel NPCM8XX BMC SoC, Tomer Maimon
  • [PATCH v3 12/18] dt-bindings: arm: npcm: Add maintainer, Tomer Maimon
  • [PATCH v3 03/18] dt-bindings: serial: 8250: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v3 04/18] dt-bindings: watchdog: npcm: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v3 02/18] clocksource: timer-npcm7xx: Add NPCM845 timer support, Tomer Maimon
  • [PATCH v3 01/18] dt-bindings: timer: npcm: Add npcm845 compatible string, Tomer Maimon
  • [PATCH v3 07/18] dt-bindings: reset: npcm: add GCR syscon property, Tomer Maimon
    • Re: [PATCH v3 07/18] dt-bindings: reset: npcm: add GCR syscon property, Krzysztof Kozlowski
      • Re: [PATCH v3 07/18] dt-bindings: reset: npcm: add GCR syscon property, Tomer Maimon
  • [PATCH v3 05/18] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock, Tomer Maimon