> -----Original Message-----
> From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Sent: Wednesday, August 31, 2022 1:28 AM
> To: Kumaravel Thiagarajan - I21417 <Kumaravel.Thiagarajan@xxxxxxxxxxxxx>
> Cc: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>; Jiri Slaby <jirislaby@xxxxxxxxxx>;
> Ilpo Jarvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>; Andy Shevchenko
> <andy.shevchenko@xxxxxxxxx>; Uwe Kleine-König <u.kleine-
> koenig@xxxxxxxxxxxxxx>; Johan Hovold <johan@xxxxxxxxxx>;
> wander@xxxxxxxxxx; etremblay@xxxxxxxxxxxxxxxxxxxx; Maciej W. Rozycki
> <macro@xxxxxxxxxxx>; Jeremy Kerr <jk@xxxxxxxxxx>; Phil Edworthy
> <phil.edworthy@xxxxxxxxxxx>; Lukas Wunner <lukas@xxxxxxxxx>; Linux
> Kernel Mailing List <linux-kernel@xxxxxxxxxxxxxxx>; open list:SERIAL DRIVERS
> <linux-serial@xxxxxxxxxxxxxxx>; UNGLinuxDriver
> <UNGLinuxDriver@xxxxxxxxxxxxx>
> Subject: Re: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for
> the quad-uart function in the multi-function endpoint of pci1xxxx device.
>
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> Hi Kumaravel,
>
> On Tue, Aug 30, 2022 at 8:01 PM Kumaravel Thiagarajan
> <kumaravel.thiagarajan@xxxxxxxxxxxxx> wrote:
> > pci1xxxx is a PCIe switch with a multi-function endpoint on one of its
> > downstream ports. Quad-uart is one of the functions in the
> > multi-function endpoint. This driver loads for the quad-uart and
> > enumerates single or multiple instances of uart based on the PCIe
> > subsystem device ID.
> >
> > Signed-off-by: Kumaravel Thiagarajan
> > <kumaravel.thiagarajan@xxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- /dev/null
> > +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
>
> > +static struct pci_driver pci1xxxx_pci_driver = {
> > + .name = "pci1xxxx serial",
> > + .probe = pci1xxxx_serial_probe,
> > + .remove = pci1xxxx_serial_remove,
> > + .id_table = pci1xxxx_pci_tbl,
> > +};
> > +
> > +module_pci_driver(pci1xxxx_pci_driver);
>
> > --- a/drivers/tty/serial/8250/Kconfig
> > +++ b/drivers/tty/serial/8250/Kconfig
> > @@ -528,6 +528,15 @@ config SERIAL_8250_TEGRA
> > Select this option if you have machine with an NVIDIA Tegra SoC and
> > wish to enable 8250 serial driver for the Tegra serial interfaces.
> >
> > +config SERIAL_8250_PCI1XXXX
> > + tristate "Microchip 8250 based serial port"
> > + depends on SERIAL_8250
>
> As this is a PCI driver, I guess it should depend on PCI (|| COMPILE_TEST)?
Ok. I will review this and modify as required.
>
> > + help
> > + Select this option if you have a setup with Microchip PCIe
> > + Switch with serial port enabled and wish to enable 8250
> > + serial driver for the serial interface. This driver support
> > + will ensure to support baud rates upto 1.5Mpbs.
>
Thank You.
Regards,
Kumaravel
