Re: [PATCH v4 09/10] tty: serial: use uart_port_tx() helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20. 09. 22, 10:54, Ilpo Järvinen wrote:
On Tue, 20 Sep 2022, Jiri Slaby wrote:

uart_port_tx() is a new helper to send characters to the device. Use it
in these drivers.

Cc: Tobias Klauser <tklauser@xxxxxxxxxx>
Cc: Richard Genoud <richard.genoud@xxxxxxxxx>
Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Cc: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Cc: Vladimir Zapolskiy <vz@xxxxxxxxx>
Cc: Liviu Dudau <liviu.dudau@xxxxxxx>
Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Cc: "Andreas Färber" <afaerber@xxxxxxx>
Cc: Manivannan Sadhasivam <mani@xxxxxxxxxx>
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---

diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index b1cd9a76dd93..53b642ea46ba 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -327,29 +327,13 @@ static void mcf_rx_chars(struct mcf_uart *pp)
  static void mcf_tx_chars(struct mcf_uart *pp)
  {
  	struct uart_port *port = &pp->port;
-	struct circ_buf *xmit = &port->state->xmit;
-
-	if (port->x_char) {
-		/* Send special char - probably flow control */
-		writeb(port->x_char, port->membase + MCFUART_UTB);
-		port->x_char = 0;
-		port->icount.tx++;
-		return;
-	}
-
-	while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) {
-		if (uart_circ_empty(xmit))
-			break;
-		writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1);
-		port->icount.tx++;
-	}
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(port);
+	unsigned int pending;
+	u8 ch;
- if (uart_circ_empty(xmit)) {
-		mcf_stop_tx(port);
+	pending = uart_port_tx(port, ch,
+		readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY,
+		writeb(ch, port->membase + MCFUART_UTB));
+	if (!pending) {

Why unsigned int pending here and bool pending in the other cases?

Right, I somehow omitted that pending is not used anywhere else. This should be bool too, of course.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>

thanks,
--
js
suse labs




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux