Linux Serial
[Prev Page][Next Page]
- Re: [PATCH v3 tty-next 1/3] 8250: microchip: pci1xxxx: Add driver for quad-uart support., (continued)
- [tty:tty-next 10/67] drivers/tty/serial/8250/8250_omap.c:825 omap8250_rs485_config() warn: bitwise AND condition is false here,
Dan Carpenter
- [PATCH 0/4] 8250: DMA Fixes,
Ilpo Järvinen
- [PATCH 1/1] serial: 8250_dma: Rearm DMA Rx if more data is pending,
Ilpo Järvinen
- [PATCH v1 0/7] Clean-up and documentation for i.MXRT1050,
Jesse Taube
- [PATCH] tty: serial: samsung_tty: Fix clk resource leak issue,
Xiu Jianfeng
- [PATCH] dt-bindings: serial: arm,sbsa-uart: Convert to json-schema,
Thierry Reding
- [PATCH] serial: Fix a typo ("ignorning"),
Jonathan Neuschäfer
- [tty:tty-linus] BUILD SUCCESS 7b7dfe4833c70a11cdfa51b38705103bd31eddaa,
kernel test robot
- [tty:tty-testing] BUILD SUCCESS 15730dc45dc7432713c7af9ee5abad76872f6405,
kernel test robot
- [PATCH v3 1/3] tty: n_gsm: introduce macro for minimal unit size,
D. Starke
- [tty:tty-testing] BUILD SUCCESS 72da688b457d738b943016dabc603efb1be5f4e1,
kernel test robot
- [PATCH v4 0/2] serial: 8250/ingenic: Add support for the JZ4750,
Siarhei Volkau
- [PATCH] serial: 8250: omap: Flush PM QOS work on remove,
Tony Lindgren
- [PATCH] serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove(),
Tony Lindgren
- [PATCH 5.15 1/2] serial: core: move RS485 configuration tasks from drivers into core,
Dominique Martinet
- [PATCH] ioctl_tty.2: Document TIOCSERGETLSR/TIOCSER_TEMT,
Pali Rohár
- [PATCH 0/4] tty: serial: Add ability to control rs485 RX_DURING_TX via a GPIO,
Christoph Niedermaier
- [PATCH v3 1/4] serial: 8250: allow use of non-runtime configured uart ports,
Martin Hundebøll
- [PATCH v2 1/3] tty: n_gsm: introduce macro for minimal unit size,
D. Starke
- [PATCH] serial: fsl_lpuart: Skip the reset for the early console port,
Xiaolei Wang
- [PATCH V4] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset,
Sherry Sun
- [PATCH] serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl(),
Tony Lindgren
- [PATCH] serial: 8250_bcm2835aux: return PTR_ERR when fail to acquire clk,
Zeng Heng
- [PATCH v3 0/2] serial: 8250/ingenic: Add support for the JZ4750,
Siarhei Volkau
- [PATCH v2 0/2] serial: 8250/ingenic: Add support for the JZ4750,
Siarhei Volkau
- [PATCH 00/21] ARM: s3c: clean out obsolete platforms,
Arnd Bergmann
- [PATCH] dt-bindings: serial: renesas,scif: Document r8a779g0 support,
Geert Uytterhoeven
- [PATCH 1/3] tty: n_gsm: introduce macro for minimal unit size,
D. Starke
- [PATCH v4 0/4] Enhance definition of DFH and use enhancements for uart driver,
matthew . gerlach
- [PATCH V3] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset,
Sherry Sun
- [PATCH] earlycon: Fix compile error when SERIAL_CORE is m,
Zhang Xiaoxu
- [PATCH printk v2 00/38] reduce console_lock scope,
John Ogness
- [PATCH printk v2 01/38] serial: kgdboc: Lock console list in probe function,
John Ogness
- [PATCH printk v2 22/38] serial: kgdboc: document console_lock usage,
John Ogness
- [PATCH printk v2 11/38] tty: serial: earlycon: use console_is_enabled(),
John Ogness
- [PATCH printk v2 34/38] serial: kgdboc: use console_list_lock instead of console_lock,
John Ogness
- [PATCH printk v2 14/38] tty: serial: samsung_tty: use console_is_enabled(),
John Ogness
- [PATCH printk v2 13/38] tty: serial: pic32_uart: use console_is_enabled(),
John Ogness
- [PATCH printk v2 12/38] tty: serial: kgdboc: use console_is_enabled(),
John Ogness
- [PATCH printk v2 15/38] tty: serial: serial_core: use console_is_enabled(),
John Ogness
- [PATCH printk v2 16/38] tty: serial: xilinx_uartps: use console_is_enabled(),
John Ogness
- [PATCH printk v2 21/38] serial: kgdboc: use srcu console list iterator,
John Ogness
- [PATCH V2] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset,
Sherry Sun
- [PATCH v2 1/2] tty: Convert tty_buffer flags to bool,
Ilpo Järvinen
- [PATCH 1/2] tty: Convert tty_buffer flags to bool,
Ilpo Järvinen
- [PATCH v5 0/5] serial: RS485 kerneldoc/documentation improvements,
Ilpo Järvinen
- [PATCH 00/44] serial: Convert drivers to use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 08/44] serial: pl011: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 02/44] serial: men_z135_uart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 04/44] serial: pch_uart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 07/44] serial: 8250: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 01/44] serial: dz: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 05/44] serial: sc16is7xx: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 03/44] serial: msm: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 06/44] serial: 8250_bcm7271: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 10/44] serial: arc: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 09/44] serial: ar933x: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 17/44] serial: imx: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 11/44] serial: atmel: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 12/44] serial: clps711x: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 13/44] serial: cpm_uart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 14/44] serial: digicolor: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 19/44] serial: liteuart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 32/44] serial: sh-sci: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 26/44] serial: pmac_zilog: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 16/44] serial: fsl_lpuart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 29/44] serial: sb1250-duart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 34/44] serial: stm32: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 27/44] serial: rda: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 28/44] serial: samsung_tty: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 21/44] serial: max310x: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 24/44] serial: mvebu-uart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 23/44] serial: milbeaut_usio: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 33/44] serial: sprd: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 20/44] serial: max3100: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 22/44] serial: meson: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 15/44] serial: linflexuart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 31/44] serial: tegra: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 25/44] serial: pic32: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 18/44] serial: ip22zilog: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 30/44] serial: sccnxp: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 40/44] serial: timbuart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 35/44] serial: sunhv: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 37/44] serial: sunsab: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 36/44] serial: sunplus-uart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 39/44] serial: sunzilog: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 38/44] serial: sunsu: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 42/44] serial: ucc_uart: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 44/44] serial: zs: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 43/44] serial: xuartps: Use uart_xmit_advance(),
Ilpo Järvinen
- [PATCH 41/44] serial: uartlite: Use uart_xmit_advance(),
Ilpo Järvinen
- Re: [PATCH 00/44] serial: Convert drivers to use uart_xmit_advance(),
Jiri Slaby
- [PATCH] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset,
Sherry Sun
- [PATCH v2] serial: tegra: Read DMA status before terminating,
Kartik
- [PATCH v2 1/3] serial: 8250: allow use of non-runtime configured uart ports,
Martin Hundebøll
- [PATCH] serial: tegra: read DMA status before terminating,
Kartik
- [PATCH v1 1/1] serial: 8250_core: Use str_enabled_disabled() helper,
Andy Shevchenko
- UART on MPC83xx in irq loop,
Uwe Kleine-König
- [PATCH 5.10 v2 1/2] serial: core: move RS485 configuration tasks from drivers into core,
Dominique Martinet
- [PATCH 5.10 0/2] Stable 5.10 backport of RS485 initial polarity fix,
Dominique Martinet
- Requested Information,
Mike Burnett
- [PATCH v2] serial: 8250: 8250_omap: Support native RS485,
Lukas Wunner
- [PATCH] serial: 8250_omap: remove wait loop from Errata i202 workaround,
Matthias Schiffer
- [PATCH 1/3] serial: 8250: allow use of non-runtime configured uart ports,
Martin Hundebøll
- [PATCH] serial: imx: Add missing .thaw_noirq hook,
Shawn Guo
- [PATCH 1/1] tty: n_gsm: make n_gsm line number configurable,
D. Starke
- Do not delay boot when printing log to serial console during startup?,
Paul Menzel
- [PATCH 0/8] MIPS: ingenic: Add support for the JZ4755 SoC,
Siarhei Volkau
- [PATCH 8/8] MIPS: DTS: Ingenic: Add support for the JZ4755 SoC,
Siarhei Volkau
- [PATCH 5/8] pinctrl: ingenic: JZ4755 minor bug fixes,
Siarhei Volkau
[syzbot] possible deadlock in __queue_work (3),
syzbot
[GIT PULL] TTY/Serial driver changes for 6.1-rc1,
Greg KH
How to trace serial console init during boot-time?,
Paul Menzel
[PATCH] tty: serial: qcom-geni-serial: Add support for Hibernation feature,
Aniket Randive
[PATCH 0/6] RISC-V: stop selecting device drivers in Kconfig.socs,
Conor Dooley
[PATCH v3 0/4] Enhance definition of DFH and use enhancements for uart driver,
matthew . gerlach
[PATCH v5 0/3] tty: TX helpers,
Jiri Slaby (SUSE)
imx serial chars lost issue,
Francesco Dolcini
[tty:tty-testing] BUILD SUCCESS 30963b2f75bfdbbcf1cc5d80bf88fec7aaba808d,
kernel test robot
[syzbot] INFO: rcu detected stall in kernfs_fop_release,
syzbot
[PATCH v2 tty-next 0/3] 8250: microchip: pci1xxxx: Add driver for the pci1xxxx's quad-uart function.,
Kumaravel Thiagarajan
[linux-next:master] BUILD REGRESSION 274d7803837da78dfc911bcda0d593412676fc20,
kernel test robot
[syzbot] possible deadlock in tty_port_tty_get,
syzbot
[PATCH v2] tty: serial: imx: Handle RS485 DE signal active high,
Marek Vasut
[PATCH v4 0/4] serial: RS485 kerneldoc/documentation improvements,
Ilpo Järvinen
[PATCH] Revert "serial: fsl_lpuart: Reset prior to registration",
Sherry Sun
[PATCH -next] tty: serial: atmel: driver depends on COMMON_CLK,
Randy Dunlap
[PATCH] hid-ft260: Add serial driver,
Christina Quast
[PATCH v3 0/4] serial: RS485 kerneldoc/documentation improvements,
Ilpo Järvinen
[RFC PATCH 0/5] 8250_omap fixes for testing,
Tony Lindgren
[PATCH] tty: serial: imx: Handle RS485 DE signal active high,
Marek Vasut
[PATCH] serial: 8250: 8250_omap: Support native RS485,
Lukas Wunner
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Site Home]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]
