Linux Serial
[Prev Page][Next Page]
- Re: [PATCH v3 3/4] fpga: dfl: add basic support for DFHv1, (continued)
- [PATCH v5 0/3] tty: TX helpers,
Jiri Slaby (SUSE)
- imx serial chars lost issue,
Francesco Dolcini
- [tty:tty-testing] BUILD SUCCESS 30963b2f75bfdbbcf1cc5d80bf88fec7aaba808d,
kernel test robot
- [syzbot] INFO: rcu detected stall in kernfs_fop_release,
syzbot
- [PATCH v2 tty-next 0/3] 8250: microchip: pci1xxxx: Add driver for the pci1xxxx's quad-uart function.,
Kumaravel Thiagarajan
- [linux-next:master] BUILD REGRESSION 274d7803837da78dfc911bcda0d593412676fc20,
kernel test robot
- [syzbot] possible deadlock in tty_port_tty_get,
syzbot
- [PATCH v2] tty: serial: imx: Handle RS485 DE signal active high,
Marek Vasut
- [PATCH v4 0/4] serial: RS485 kerneldoc/documentation improvements,
Ilpo Järvinen
- [PATCH] Revert "serial: fsl_lpuart: Reset prior to registration",
Sherry Sun
- [PATCH -next] tty: serial: atmel: driver depends on COMMON_CLK,
Randy Dunlap
- [PATCH] hid-ft260: Add serial driver,
Christina Quast
- [PATCH v3 0/4] serial: RS485 kerneldoc/documentation improvements,
Ilpo Järvinen
- [RFC PATCH 0/5] 8250_omap fixes for testing,
Tony Lindgren
- [PATCH] tty: serial: imx: Handle RS485 DE signal active high,
Marek Vasut
- [PATCH] serial: 8250: 8250_omap: Support native RS485,
Lukas Wunner
- [PATCH] serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios(),
Lukas Wunner
- [PATCH 1/4] tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar(),
Jiri Slaby
- [PATCH] tty: serial: allow pxa.c to be COMPILE_TESTed,
Jiri Slaby
- [PATCH v2] serial: Convert serial_rs485 to kernel doc,
Ilpo Järvinen
- Re: [tty:tty-testing 42/45] ld.lld: error: undefined symbol: __clk_is_enabled,
Sergiu.Moga
- [PATCH] tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL,
Sergiu Moga
- [PATCH -next] serial: stm32: Fix unused-variable warning,
Ren Zhijie
- [tty:tty-next] BUILD SUCCESS a12c689209185c1ad872723a644d0cd27e52d49c,
kernel test robot
- [tty:tty-testing] BUILD SUCCESS 379a33786d489ab81885ff0b3935cfeb36137fea,
kernel test robot
- [tty:tty-testing] BUILD SUCCESS 4c8928850c9dc5c849ee37d89a79d44a283bdd87,
kernel test robot
- [PATCH] serial: 8250: Fix restoring termios speed after suspend,
Pali Rohár
- [GIT PULL] TTY/Serial driver fixes for 6.0-rc7,
Greg KH
- [PATCH printk 00/18] preparation for threaded/atomic printing,
John Ogness
- [PATCH v2 1/1] serdev: Replace poll loop by readx_poll_timeout() macro,
Andy Shevchenko
- [tty:tty-next 42/45] atmel_serial.c:undefined reference to `__clk_is_enabled',
kernel test robot
- serial: New xr20m117x driver questions,
Jeff Harris
- [PATCH v2 0/6] Enhance definition of DFH and use enhancements for uart driver,
matthew . gerlach
- [tty:tty-next 37/45] htmldocs: Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/mfd/atmel-usart.txt,
kernel test robot
- [tty:tty-testing] BUILD SUCCESS adafbbf6895eb0ce41a313c6ee68870ab9aa93cd,
kernel test robot
- [tty:tty-linus] BUILD SUCCESS 643792048ee84b199052e9c8f89253649ca78922,
kernel test robot
- [PATCH v4] serial: Deassert Transmit Enable on probe in driver-specific way,
Lukas Wunner
- [PATCH v3] serial: Deassert Transmit Enable on probe in driver-specific way,
Lukas Wunner
- Re: [PATCH v2] serial: Deassert Transmit Enable on probe in driver-specific way,
Greg Kroah-Hartman
- [PATCH v5 0/9] Make atmel serial driver aware of GCLK,
Sergiu Moga
- [PATCH v5 1/9] dt-bindings: mfd: atmel,sama5d2-flexcom: Add SPI child node ref binding,
Sergiu Moga
- [PATCH v5 5/9] dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock,
Sergiu Moga
- [PATCH v5 3/9] dt-bindings: serial: atmel,at91-usart: Add SAM9260 compatibles to SAM9X60,
Sergiu Moga
- [PATCH v5 6/9] tty: serial: atmel: Separate mode clearing between UART and USART,
Sergiu Moga
- [PATCH v5 4/9] dt-bindings: mfd: atmel,sama5d2-flexcom: Add USART child node ref binding,
Sergiu Moga
- [PATCH v5 2/9] dt-bindings: serial: atmel,at91-usart: convert to json-schema,
Sergiu Moga
- [PATCH v5 9/9] tty: serial: atmel: Use FIELD_PREP/FIELD_GET,
Sergiu Moga
- [PATCH v5 7/9] tty: serial: atmel: Only divide Clock Divisor if the IP is USART,
Sergiu Moga
- [PATCH v5 8/9] tty: serial: atmel: Make the driver aware of the existence of GCLK,
Sergiu Moga
- [PATCH] drivers: serial: jsm: fix some leaks in probe,
Dan Carpenter
- [PATCH v4 1/1] serial: 8250: Toggle IER bits on only after irq has been set up,
Ilpo Järvinen
- [PATCH v2 0/3] serial: 8250: Let drivers request full 16550A feature probing,
Maciej W. Rozycki
- Cutiepi, serdevs, and right way to handle its power button,
Pavel Machek
- [PATCH v2] serial: sifive: enable clocks for UART when probed,
Olof Johansson
- [PATCH] tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown,
Sherry Sun
- [PATCH v4 00/10] tty: TX helpers,
Jiri Slaby
- [PATCH v4 04/10] tty: serial: extract lqasc_tx_ready() from lqasc_tx_chars(),
Jiri Slaby
- [PATCH v4 01/10] tty: serial: move and cleanup vt8500_tx_empty(),
Jiri Slaby
- [PATCH v4 05/10] tty: serial: extract tx_ready() from __serial_lpc32xx_tx(),
Jiri Slaby
- [PATCH v4 08/10] tty: serial: introduce transmit helpers,
Jiri Slaby
- [PATCH v4 02/10] tty: serial: clean up stop-tx part in altera_uart_tx_chars(),
Jiri Slaby
- [PATCH v4 03/10] tty: serial: altera_uart_{r,t}x_chars() need only uart_port,
Jiri Slaby
- [PATCH v4 06/10] tty: serial: switch mpc52xx_uart_int_{r,t}x_chars() to bool,
Jiri Slaby
- [PATCH v4 07/10] tty: serial: extract serial_omap_put_char() from transmit_chars(),
Jiri Slaby
- [PATCH v4 09/10] tty: serial: use uart_port_tx() helper,
Jiri Slaby
- [PATCH v4 10/10] tty: serial: use uart_port_tx_limited(),
Jiri Slaby
- Re: [PATCH v4 00/10] tty: TX helpers,
Greg KH
- [PATCH] serial: sifive: enable clocks for UART when probed,
Olof Johansson
- [PATCH v4 0/9] Make atmel serial driver aware of GCLK,
Sergiu Moga
- [PATCH v4 4/9] dt-bindings: mfd: atmel,sama5d2-flexcom: Add USART child node ref binding,
Sergiu Moga
- [PATCH v4 6/9] tty: serial: atmel: Define GCLK as USART baudrate source clock,
Sergiu Moga
- [PATCH v4 2/9] dt-bindings: serial: atmel,at91-usart: convert to json-schema,
Sergiu Moga
- [PATCH v4 7/9] tty: serial: atmel: Define BRSRCCK bitmask of UART IP's Mode Register,
Sergiu Moga
- [PATCH v4 5/9] dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock,
Sergiu Moga
- [PATCH v4 1/9] dt-bindings: mfd: atmel,sama5d2-flexcom: Add SPI child node ref binding,
Sergiu Moga
- [PATCH v4 9/9] tty: serial: atmel: Make the driver aware of the existence of GCLK,
Sergiu Moga
- [PATCH v4 3/9] dt-bindings: serial: atmel,at91-usart: Add SAM9260 compatibles to SAM9X60,
Sergiu Moga
- [PATCH v4 8/9] tty: serial: atmel: Only divide Clock Divisor if the IP is USART,
Sergiu Moga
- [PATCH v3 1/1] serial: 8250: Toggle IER bits on only after irq has been set up,
Ilpo Järvinen
- binding and generic support for external uart supply,
Rasmus Villemoes
- [PATCH v1] drivers/tty/serial/8250: check the return value of clk_prepare_enable(),
Li Zhong
- [PATCH v1] drivers/tty/serial/8250: check the return value of clk_set_rate(),
Li Zhong
- [syzbot] BUG: soft lockup in tx,
syzbot
- [PATCH 0/2] serial: 8250: Let drivers request full 16550A feature probing,
Maciej W. Rozycki
- [PATCH v2 1/1] serial: 8250: Turn IER bits on only after irq has been set up,
Ilpo Järvinen
- Re: [PATCH] serial: Deassert RS485 Transmit Enable on probe in driver-specific way,
Matthias Schiffer
- [PATCH] serial: 8250: omap: Use serial8250_em485_supported,
Matthias Schiffer
- [PATCH v1 1/1] TODO: serdev: Replace poll loop by readx_poll_timeout() macro,
Andy Shevchenko
- I/O page faults from 8250_mid PCIe UART after TIOCVHANGUP,
Lennert Buytenhek
- [PATCH v3 00/14] Make atmel serial driver aware of GCLK,
Sergiu Moga
- [PATCH v3 14/14] tty: serial: atmel: Make the driver aware of the existence of GCLK,
Sergiu Moga
- [PATCH v3 12/14] tty: serial: atmel: Only divide Clock Divisor if the IP is USART,
Sergiu Moga
- [PATCH v3 13/14] clk: at91: sama5d2: Add Generic Clocks for UART/USART,
Sergiu Moga
- [PATCH v3 02/14] ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1,
Sergiu Moga
- [PATCH v3 03/14] ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes,
Sergiu Moga
- [PATCH v3 05/14] dt-bindings: mfd: atmel,sama5d2-flexcom: Add SPI child node ref binding,
Sergiu Moga
- [PATCH v3 08/14] dt-bindings: mfd: atmel,sama5d2-flexcom: Add USART child node ref binding,
Sergiu Moga
- [PATCH v3 04/14] spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties,
Sergiu Moga
- [PATCH v3 06/14] dt-bindings: serial: atmel,at91-usart: convert to json-schema,
Sergiu Moga
- [PATCH v3 09/14] dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock,
Sergiu Moga
- [PATCH v3 10/14] tty: serial: atmel: Define GCLK as USART baudrate source clock,
Sergiu Moga
- [PATCH v3 01/14] ARM: dts: at91: sama7g5: Swap rx and tx for spi11,
Sergiu Moga
- [PATCH v3 07/14] dt-bindings: serial: atmel,at91-usart: Add SAM9260 compatibles to SAM9X60,
Sergiu Moga
- [PATCH v3 11/14] tty: serial: atmel: Define BRSRCCK bitmask of UART IP's Mode Register,
Sergiu Moga
- kernel 5.19.8: "Oxford Semiconductor Ltd OXPCIe952 Dual Native 950 UART" gets wrong baudrate (PCI ID 1415:c158),
Anders Blomdell
- [PATCH] tty: serial: cpm_uart: remove unused cpm_uart_nr declaration,
Gaosheng Cui
- [PATCH] serial: omap: Disallow RS-485 if rts-gpio is not specified,
Lukas Wunner
- [PATCH] serial: ar933x: Deassert Transmit Enable on ->rs485_config(),
Lukas Wunner
- [PATCH] serial: stm32: Deassert Transmit Enable on ->rs485_config(),
Lukas Wunner
- [PATCH] serial: fsl_lpuart: Reset prior to registration,
Lukas Wunner
- [PATCH v1 02/11] dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c,
Johan Jonker
- [PATCH v1 08/11] dt-bindings: arm: rockchip: pmu: add rockchip,rk3128-pmu,
Johan Jonker
- [PATCH v1 06/11] dt-bindings: usb: dwc2: rockchip: add rockchip,rk3128-usb,
Johan Jonker
- [PATCH v1 09/11] dt-bindings: phy: phy-rockchip-inno-usb2: add rockchip,rk3128-usb2phy,
Johan Jonker
- [PATCH v1 05/11] dt-bindings: spi: rockchip: add rockchip,rk3128-spi,
Johan Jonker
- [PATCH v1 04/11] dt-bindings: mmc: rockchip: add rockchip,rk3128-dw-mshc,
Johan Jonker
- [PATCH v1 03/11] dt-bindings: pwm: rockchip: add rockchip,rk3128-pwm,
Johan Jonker
- [PATCH v1 07/11] dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdt,
Johan Jonker
- [PATCH v1 10/11] dt-bindings: soc: rockchip: grf: add rockchip,rk3128-grf,
Johan Jonker
- [PATCH v1 01/11] dt-bindings: serial: rockchip: add rockchip,rk3128-uart,
Johan Jonker
- [PATCH v1 11/11] dt-bindings: mtd: rockchip: add rockchip,rk3128-nfc,
Johan Jonker
- [PATCH v1 00/11] Add more Rockchip rk3128 compatible strings,
Johan Jonker
- [tty:tty-testing] BUILD SUCCESS ccf3a570410af607124534396cfc0e9a0986b5e8,
kernel test robot
- [PATCH v1 1/1] serial: 8250_omap: Convert to use uart_xmit_advance(),
Andy Shevchenko
- [PATCH v1 1/1] serial: 8250_dma: Convert to use uart_xmit_advance(),
Andy Shevchenko
- [tty:tty-testing] BUILD SUCCESS 408e532e80997be64caf8cdf45f2ff53c2279725,
kernel test robot
- [tty:tty-linus] BUILD SUCCESS 1d10cd4da593bc0196a239dcc54dac24b6b0a74e,
kernel test robot
- [PATCH] tty: serial: qcom-geni-serial: Replace hardcoded icc flags with macros.,
Vijaya Krishna Nivarthi
- [PATCH v1 0/5] Enhance definition of DFH and use enhancements for uart driver,
matthew . gerlach
- [PATCH v2 00/13] Make atmel serial driver aware of GCLK,
Sergiu Moga
- [PATCH v2 08/13] tty: serial: atmel: Define GCLK as USART baudrate source clock,
Sergiu Moga
- [PATCH v2 04/13] ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1,
Sergiu Moga
- [PATCH v2 03/13] dt-bindings: mfd: atmel,sama5d2-flexcom: Add SPI child node ref binding,
Sergiu Moga
- [PATCH v2 02/13] ARM: dts: at91: sama7g5: Swap rx and tx for spi11,
Sergiu Moga
- [PATCH v2 05/13] dt-bindings: serial: atmel,at91-usart: convert to json-schema,
Sergiu Moga
- [PATCH v2 01/13] spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties,
Sergiu Moga
- [PATCH v2 11/13] clk: at91: sama5d2: Add Generic Clocks for UART/USART,
Sergiu Moga
- [PATCH v2 09/13] tty: serial: atmel: Define BRSRCCK bitmask of UART IP's Mode Register,
Sergiu Moga
- [PATCH v2 10/13] tty: serial: atmel: Only divide Clock Divisor if the IP is USART,
Sergiu Moga
- [PATCH v2 12/13] tty: serial: atmel: Make the driver aware of the existence of GCLK,
Sergiu Moga
- [PATCH v2 07/13] dt-bindings: mfd: atmel,sama5d2-flexcom: Add USART child node ref binding,
Sergiu Moga
- [PATCH v2 13/13] dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock,
Sergiu Moga
- [PATCH v2 06/13] dt-bindings: serial: atmel,at91-usart: Add SAM9260 compatibles to SAM9x60,
Sergiu Moga
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Site Home]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]