On 18/11/2022 13:25, Bartosz Golaszewski wrote:
From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Drop all unused symbols from the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
drivers/tty/serial/qcom_geni_serial.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 9f2212e7b5ec..7af5df6833c7 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -42,20 +42,11 @@
#define UART_TX_PAR_EN BIT(0)
#define UART_CTS_MASK BIT(1)
-/* SE_UART_TX_WORD_LEN */
-#define TX_WORD_LEN_MSK GENMASK(9, 0)
-
/* SE_UART_TX_STOP_BIT_LEN */
-#define TX_STOP_BIT_LEN_MSK GENMASK(23, 0)
#define TX_STOP_BIT_LEN_1 0
-#define TX_STOP_BIT_LEN_1_5 1
#define TX_STOP_BIT_LEN_2 2
-/* SE_UART_TX_TRANS_LEN */
-#define TX_TRANS_LEN_MSK GENMASK(23, 0)
-
/* SE_UART_RX_TRANS_CFG */
-#define UART_RX_INS_STATUS_BIT BIT(2)
#define UART_RX_PAR_EN BIT(3)
/* SE_UART_RX_WORD_LEN */
@@ -66,12 +57,9 @@
/* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */
#define PAR_CALC_EN BIT(0)
-#define PAR_MODE_MSK GENMASK(2, 1)
-#define PAR_MODE_SHFT 1
#define PAR_EVEN 0x00
#define PAR_ODD 0x01
#define PAR_SPACE 0x10
-#define PAR_MARK 0x11
/* SE_UART_MANUAL_RFR register fields */
#define UART_MANUAL_RFR_EN BIT(31)
@@ -80,11 +68,8 @@
/* UART M_CMD OP codes */
#define UART_START_TX 0x1
-#define UART_START_BREAK 0x4
-#define UART_STOP_BREAK 0x5
/* UART S_CMD OP codes */
#define UART_START_READ 0x1
-#define UART_PARAM 0x1
#define UART_OVERSAMPLING 32
#define STALE_TIMEOUT 16
