For the lpuart driver, the Idle Line Interrupt Enable now is only needed for the CPU mode, so enable the UARTCTRL_ILIE at the correct place, and clear it when shutdown. Also need to configure the suitable UARTCTRL_IDLECFG, now the value is 0x7, represent 128 idle characters will trigger the Idle Line Interrupt. Signed-off-by: Sherry Sun <sherry.sun@xxxxxxx> --- drivers/tty/serial/fsl_lpuart.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index bd685491eead..f5a0a14fa366 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -179,7 +179,7 @@ #define UARTCTRL_SBK 0x00010000 #define UARTCTRL_MA1IE 0x00008000 #define UARTCTRL_MA2IE 0x00004000 -#define UARTCTRL_IDLECFG 0x00000100 +#define UARTCTRL_IDLECFG_OFF 8 #define UARTCTRL_LOOPS 0x00000080 #define UARTCTRL_DOZEEN 0x00000040 #define UARTCTRL_RSRC 0x00000020 @@ -230,6 +230,8 @@ #define GLOBAL_RST_MIN_US 20 #define GLOBAL_RST_MAX_US 40 +#define UARTCTRL_IDLECFG 0x7 + /* Rx DMA timeout in ms, which is used to calculate Rx ring buffer size */ #define DMA_RX_TIMEOUT (10) @@ -1506,7 +1508,7 @@ static void lpuart32_setup_watermark(struct lpuart_port *sport) ctrl = lpuart32_read(&sport->port, UARTCTRL); ctrl_saved = ctrl; ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE | - UARTCTRL_RIE | UARTCTRL_RE); + UARTCTRL_RIE | UARTCTRL_RE | UARTCTRL_ILIE); lpuart32_write(&sport->port, ctrl, UARTCTRL); /* enable FIFO mode */ @@ -1530,7 +1532,8 @@ static void lpuart32_setup_watermark_enable(struct lpuart_port *sport) lpuart32_setup_watermark(sport); temp = lpuart32_read(&sport->port, UARTCTRL); - temp |= UARTCTRL_RE | UARTCTRL_TE | UARTCTRL_ILIE; + temp |= UARTCTRL_RE | UARTCTRL_TE; + temp |= UARTCTRL_IDLECFG << UARTCTRL_IDLECFG_OFF; lpuart32_write(&sport->port, temp, UARTCTRL); } @@ -1669,7 +1672,7 @@ static void lpuart32_configure(struct lpuart_port *sport) } temp = lpuart32_read(&sport->port, UARTCTRL); if (!sport->lpuart_dma_rx_use) - temp |= UARTCTRL_RIE; + temp |= UARTCTRL_RIE | UARTCTRL_ILIE; if (!sport->lpuart_dma_tx_use) temp |= UARTCTRL_TIE; lpuart32_write(&sport->port, temp, UARTCTRL); @@ -1770,7 +1773,7 @@ static void lpuart32_shutdown(struct uart_port *port) /* disable Rx/Tx and interrupts */ temp = lpuart32_read(port, UARTCTRL); - temp &= ~(UARTCTRL_TE | UARTCTRL_RE | + temp &= ~(UARTCTRL_TE | UARTCTRL_RE | UARTCTRL_ILIE | UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); lpuart32_write(port, temp, UARTCTRL); -- 2.17.1
