If the platform doesn't use DMA device filter (as is the case with
Elkhart Lake), whole lpss8250_dma_setup() setup is skipped. This
results in skipping also *_maxburst setup which is undesirable.
Refactor lpss8250_dma_setup() to configure DMA even if filter is not
setup.
Cc: stable <stable@xxxxxxxxxx>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_lpss.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 44cc755b1a29..7d9cddbfef40 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -277,8 +277,13 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
struct dw_dma_slave *rx_param, *tx_param;
struct device *dev = port->port.dev;
- if (!lpss->dma_param.dma_dev)
+ if (!lpss->dma_param.dma_dev) {
+ dma = port->dma;
+ if (dma)
+ goto out_configuration_only;
+
return 0;
+ }
rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
if (!rx_param)
@@ -289,16 +294,18 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
return -ENOMEM;
*rx_param = lpss->dma_param;
- dma->rxconf.src_maxburst = lpss->dma_maxburst;
-
*tx_param = lpss->dma_param;
- dma->txconf.dst_maxburst = lpss->dma_maxburst;
dma->fn = lpss8250_dma_filter;
dma->rx_param = rx_param;
dma->tx_param = tx_param;
port->dma = dma;
+
+out_configuration_only:
+ dma->rxconf.src_maxburst = lpss->dma_maxburst;
+ dma->txconf.dst_maxburst = lpss->dma_maxburst;
+
return 0;
}
--
2.30.2
