Re: [PATCH v3 3/4] fpga: dfl: add basic support for DFHv1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Tue, 4 Oct 2022, Andy Shevchenko wrote:

On Tue, Oct 04, 2022 at 07:37:17AM -0700, matthew.gerlach@xxxxxxxxxxxxxxx wrote:
From: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>

Add generic support for MSIX interrupts for DFL devices.

$ git grep -n -w MSI[xX] | wc -l
421

$ git grep -n -w MSI-[xX] | wc -l
1224

MSI-X (This is I believe the official name for that)

Yes, MSI-X is the official name.  I will update accordingly.


And everywhere.

The location of a feature's registers is explicitly
described in DFHv1 and can be relative to the base of the DFHv1
or an absolute address.  Parse the location and pass the information
to DFL driver.

...

+	ddev->csr_res.start = feature->csr_res.start;
+	ddev->csr_res.end = feature->csr_res.end;
+	ddev->csr_res.flags = IORESOURCE_MEM;

Why simple assignment of the resource can't work?

	ddev->csr_res = feature->csr_res;

(I know the downside of this, but still)

A simple structure assignment does look cleaner.


...

+		feature->csr_res.start = finfo->csr_res.start;
+		feature->csr_res.end = finfo->csr_res.end;

Ditto.

...

+	case 0:
+		type = feature_dev_id_type(binfo->feature_dev);
+		if (type == PORT_ID) {
+			switch (fid) {
+			case PORT_FEATURE_ID_UINT:
+				v = readq(base + PORT_UINT_CAP);
+				ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
+				inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
+				break;
+			case PORT_FEATURE_ID_ERROR:
+				v = readq(base + PORT_ERROR_CAP);
+				ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+				break;

No default?

The default is to do nothing.


+			}
+		} else if (type == FME_ID) {

+			if (fid == FME_FEATURE_ID_GLOBAL_ERR) {

Don't remember if that was discussed already or not, but

I would use switch-case here as well in order to be consistent with the
previous code piece pattern.

Using a switch statement for a single case seems a little strange to me, but I'll take a look to see the result seems more consistent.


+				v = readq(base + FME_ERROR_CAP);
+				ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
+			}
+		}
+		break;

...

+		if (v & DFHv1_CSR_ADDR_REL)
+			finfo->csr_res.start = FIELD_GET(DFHv1_CSR_ADDR_MASK, v);
+		else
+			finfo->csr_res.start = binfo->start + ofst
+					       + FIELD_GET(DFHv1_CSR_ADDR_MASK, v);

Locate + on the previous line.

Got it.

+		v = readq(binfo->ioaddr + ofst + DFHv1_CSR_SIZE_GRP);
+		finfo->csr_res.end = finfo->csr_res.start
+				     + FIELD_GET(DFHv1_CSR_SIZE_GRP_SIZE, v) - 1;

Ditto.

...

+int dfhv1_find_param(void __iomem *base, resource_size_t max, int param)
+{
+	int off = DFHv1_PARAM_HDR;
+	u64 v, next;
+
+	while (off < max) {
+		v = readq(base + off);
+		if (param == FIELD_GET(DFHv1_PARAM_HDR_ID, v))

+			return (DFHv1_PARAM_DATA + off);

Too many parentheses.

OK, I can remove the parentheses.


+
+		next = FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, v);
+		if (!next)
+			break;
+
+		off += next;
+	}
+
+	return -ENOENT;
+}

The entire function seems a bit dangerous to me. You can ask for any max which
covers (up to) 64-bit address space and then do MMIO by basically arbitrary
address. How do you protect against wrong MMIO window here? (This is FPGA, so
anything can be read from HW, i.o.w. it's _untrusted_ source of the data.)

A broken FPGA image certainly can return anything from a read. That being said I think this is similar to a reg field in a device tree. The values in the reg field can be broken or mistyped.


Also, have you tested this with IOMMU enabled? How do they work together (if
there is any collision at all between two?)

All my testing has been with IOMMU enabled. The registers may be in the same page as the DFHv1 header, but they may not. For this reason the DFHv1 header is ioremapped, parsed, and then unmapped before the actual registers are mapped.

 > > ...

+int dfhv1_find_param(void __iomem *base, resource_size_t max, int param);

+int dfhv1_has_params(void __iomem *base);

I would expect to see some struct instead of base which will provide means of
protection against wrong MMIO accesses.

...

Kernel doc usually accompanies the C-code, i.o.w. implementations and not
declarations.

I will move kernel doc to the function implementations.


--
With Best Regards,
Andy Shevchenko






[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux