Re: [PATCH v4 4/4] tty: serial: 8250: add DFL bus driver for Altera 16550.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 1 Nov 2022, matthew.gerlach@xxxxxxxxxxxxxxx wrote:

> 
> 
> On Tue, 1 Nov 2022, Xu Yilun wrote:
> 
> > On 2022-10-31 at 17:34:39 -0700, matthew.gerlach@xxxxxxxxxxxxxxx wrote:
> > > 
> > > 
> > > On Sat, 29 Oct 2022, Xu Yilun wrote:
> > > 
> > > > On 2022-10-20 at 14:26:10 -0700, matthew.gerlach@xxxxxxxxxxxxxxx wrote:
> > > > > From: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
> > > > > 
> > > > > Add a Device Feature List (DFL) bus driver for the Altera
> > > > > 16550 implementation of UART.
> > > > > 
> > > > > Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
> > > > > ---
> > > > > v4: use dev_err_probe() everywhere that is appropriate
> > > > >     clean up noise
> > > > >     change error messages to use the word, unsupported
> > > > >     tried again to sort Makefile and KConfig better
> > > > >     reorder probe function for easier error handling
> > > > >     use new dfh_find_param API
> > > > > 
> > > > > v3: use passed in location of registers
> > > > >     use cleaned up functions for parsing parameters
> > > > > 
> > > > > v2: clean up error messages
> > > > >     alphabetize header files
> > > > >     fix 'missing prototype' error by making function static
> > > > >     tried to sort Makefile and Kconfig better
> > > > > ---
> > > > >  drivers/tty/serial/8250/8250_dfl.c | 149
> > > > > +++++++++++++++++++++++++++++
> > > > >  drivers/tty/serial/8250/Kconfig    |  12 +++
> > > > >  drivers/tty/serial/8250/Makefile   |   1 +
> > > > >  3 files changed, 162 insertions(+)
> > > > >  create mode 100644 drivers/tty/serial/8250/8250_dfl.c
> > > > > 
> > > > > diff --git a/drivers/tty/serial/8250/8250_dfl.c
> > > > > b/drivers/tty/serial/8250/8250_dfl.c
> > > > > new file mode 100644
> > > > > index 000000000000..f02f0ba2a565
> > > > > --- /dev/null
> > > > > +++ b/drivers/tty/serial/8250/8250_dfl.c
> > > > > @@ -0,0 +1,149 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > +/*
> > > > > + * Driver for FPGA UART
> > > > > + *
> > > > > + * Copyright (C) 2022 Intel Corporation, Inc.
> > > > > + *
> > > > > + * Authors:
> > > > > + *   Ananda Ravuri <ananda.ravuri@xxxxxxxxx>
> > > > > + *   Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
> > > > > + */
> > > > > +
> > > > > +#include <linux/bitfield.h>
> > > > > +#include <linux/dfl.h>
> > > > > +#include <linux/io-64-nonatomic-lo-hi.h>
> > > > > +#include <linux/kernel.h>
> > > > > +#include <linux/module.h>
> > > > > +#include <linux/serial.h>
> > > > > +#include <linux/serial_8250.h>
> > > > > +
> > > > > +struct dfl_uart {
> > > > > +	int line;
> > > > > +};
> > > > > +
> > > > > +static int dfl_uart_get_params(struct dfl_device *dfl_dev, struct
> > > > > uart_8250_port *uart)
> > > > > +{
> > > > > +	struct device *dev = &dfl_dev->dev;
> > > > > +	u64 v, fifo_len, reg_width;
> > > > > +	u64 *p;
> > > > > +
> > > > > +	p = dfh_find_param(dfl_dev, DFHv1_PARAM_ID_CLK_FRQ);
> > > > > +	if (!p)
> > > > > +		return dev_err_probe(dev, -EINVAL, "missing CLK_FRQ
> > > > > param\n");
> > > > > +
> > > > > +	uart->port.uartclk = *p;
> > > > > +	dev_dbg(dev, "UART_CLK_ID %u Hz\n", uart->port.uartclk);
> > > > > +
> > > > > +	p = dfh_find_param(dfl_dev, DFHv1_PARAM_ID_FIFO_LEN);
> > > > > +	if (!p)
> > > > > +		return dev_err_probe(dev, -EINVAL, "missing FIFO_LEN
> > > > > param\n");
> > > > > +
> > > > > +	fifo_len = *p;
> > > > > +	dev_dbg(dev, "UART_FIFO_ID fifo_len %llu\n", fifo_len);
> > > > > +
> > > > > +	switch (fifo_len) {
> > > > > +	case 32:
> > > > > +		uart->port.type = PORT_ALTR_16550_F32;
> > > > > +		break;
> > > > > +
> > > > > +	case 64:
> > > > > +		uart->port.type = PORT_ALTR_16550_F64;
> > > > > +		break;
> > > > > +
> > > > > +	case 128:
> > > > > +		uart->port.type = PORT_ALTR_16550_F128;
> > > > > +		break;
> > > > > +
> > > > > +	default:
> > > > > +		return dev_err_probe(dev, -EINVAL, "unsupported
> > > > > fifo_len %llu\n", fifo_len);
> > > > > +	}
> > > > > +
> > > > > +	p = dfh_find_param(dfl_dev, DFHv1_PARAM_ID_REG_LAYOUT);
> > > > > +	if (!p)
> > > > > +		return dev_err_probe(dev, -EINVAL, "missing REG_LAYOUT
> > > > > param\n");
> > > > > +
> > > > > +	v = *p;
> > > > > +	uart->port.regshift = FIELD_GET(DFHv1_PARAM_ID_REG_SHIFT, v);
> > > > > +	reg_width = FIELD_GET(DFHv1_PARAM_ID_REG_WIDTH, v);
> > > > 
> > > > I have concern that the raw layout inside the parameter block is
> > > > still exposed to drivers and need to be parsed by each driver.
> > > 
> > > Raw parameter block will always have to be passed to the driver because HW
> > > specific properties can be defined that will need to be parsed by the
> > > specific driver.
> > 
> > So there is a question about the scope of the definitions of these parameter
> > blocks. MSIX seems globally used across all dfl devices. REG_LAYOUT
> > seems specific to uart?
> 
> There are definitely two classes of parameter blocks.  One class is HW
> agnostic parameters where the parameters are relevant to many different kinds
> of HW components.  MSI-X, and input clock-frequency are certainly HW agnostic,
> and it turns out that REG_LAYOUT is not specific to uart.  You can see
> reg_bits and reg_stride in struct regmap_config.  There are also device tree
> bindings for reg-shift and reg-io-width.  The second class of parameters would
> be specific to HW component.  In the case of this uart driver, all parameters
> would be considered HW agnostic parameters.
> 
> > 
> > If a parameter block is widely used in dfl drivers, duplicate the parsing
> > from HW layout in each driver may not be a good idea. While for device
> > specific parameter block, it's OK.
> 
> It sounds like we are in agreement.
> 
> > 
> > Another concern is the indexing of the parameter IDs. If some parameter
> > blocks should be device specific, then no need to have globally indexed
> > parameter IDs. Index them locally in device is OK. So put the definitions
> > of ID values, HW layout and their parsing operation in each driver.
> 
> It may be confusing for two drivers to use the same parameter id that have
> different meanings and data layout.  Since all the parameters for this driver
> would be considered HW agnostic, we'd don't need to address this issue with
> this patchset.
>
> > > > How about we define HW agnostic IDs for parameter specific fields like:
> > > > 
> > > > PARAM_ID		FIELD_ID
> > > > ================================
> > > > MSIX			STARTV
> > > > 			NUMV
> > > > --------------------------------
> > > > CLK			FREQ
> > > > --------------------------------
> > > > FIFO			LEN
> > > > --------------------------------
> > > > REG_LAYOUT		WIDTH
> > > > 			SHIFT
> > > > 
> > > > And define like u64 dfl_find_param(struct dfl_device *, int param_id,
> > > > int field_id)
> > > 
> > > I don't think dfl_find_param as defined above adds much value.
> > > 
> > > > 
> > > > Think further, if we have to define HW agnostic property - value pairs,
> > > > why don't we just use "Software nodes for the firmware node", see
> > > > drivers/base/swnode.c. I think this may be a better choice.
> > > 
> > > I am looking into "Software nodes for the firmware node", and it can be
> > > used
> > > for HW agnostic properties.  Each dfl driver will still have to make a
> > > function call to fetch each HW agnostice property value as well as a
> > > function call to find the HW specific parameters and then parse those
> > > parameters.

Btw, another aspect this discussion has completely overlooked is the 
presence of parameter version and how it impacts data layout. Is v1 
always going be a subset of v2 or can a later version remove something
v1 had?

-- 
 i.



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux