RE: [PATCH] Revert "serial: fsl_lpuart: Reset prior to registration"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> 
> > This reverts commit 60f361722ad2ae5ee667d0b0545d40c42f754daf.
> >
> > commit 60f361722ad2 ("serial: fsl_lpuart: Reset prior to
> > registration") causes the lpuart console cannot work any more. Since
> > the console is registered in the uart_add_one_port(), the driver
> > cannot identify the console port before call uart_add_one_port(),
> > which causes all the uart ports including the console port will be global
> reset.
> > So need to revert this patch to avoid breaking the lpuart console.
> >
> > Signed-off-by: Sherry Sun <sherry.sun@xxxxxxx>
> > ---
> >  drivers/tty/serial/fsl_lpuart.c | 10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/tty/serial/fsl_lpuart.c
> > b/drivers/tty/serial/fsl_lpuart.c index 67fa113f77d4..7da46557fcb3
> > 100644
> > --- a/drivers/tty/serial/fsl_lpuart.c
> > +++ b/drivers/tty/serial/fsl_lpuart.c
> > @@ -2722,10 +2722,6 @@ static int lpuart_probe(struct platform_device
> *pdev)
> >  		handler = lpuart_int;
> >  	}
> >
> > -	ret = lpuart_global_reset(sport);
> > -	if (ret)
> > -		goto failed_reset;
> > -
> 
> So the problem with this being so early is uart_console() in
> lpuart_global_reset() that doesn't detect a console because sport->cons is
> not yet assigned? Couldn't that be worked around differently?
> 
> Or is there something else in addition to that I'm missing?
> 
Hi Ilpo,

Yes, the root cause of the console cannot work after apply the commit 60f361722ad2 ("serial: fsl_lpuart: Reset prior to registration") is lpuart_global_reset() cannot identify the console port, so reset all uart ports.

Actually I've been thinking about any other workaround all afternoon, seems no other good options to me till now. And after a further check, I think the original patch is not needed, as uart_add_one_port() won't open the tty device, it should be safe to global reset the non-console ports after uart_add_one_port().

Best Regards
Sherry




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux