Take advantage of the new uart_xmit_advance() helper. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> --- drivers/tty/serial/stm32-usart.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index dfdbcf092fac..24def72b2565 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -596,8 +596,7 @@ static void stm32_usart_transmit_chars_pio(struct uart_port *port) if (!(readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE)) break; writel_relaxed(xmit->buf[xmit->tail], port->membase + ofs->tdr); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; + uart_xmit_advance(port, 1); } /* rely on TXE irq (mask or unmask) for sending remaining data */ @@ -673,8 +672,8 @@ static void stm32_usart_transmit_chars_dma(struct uart_port *port) stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAT); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); - port->icount.tx += count; + uart_xmit_advance(port, count); + return; fallback_err: -- 2.30.2
