Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] power: bq24190_charger: Check the interrupt status on resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv4 0/2] Two bq24190 PM improvments
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] omapfb: dss: Handle return error in dss_init_ports.
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix pmic for boards that need vmmc1 on reboot
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] omapfb: dss: Handle return error in dss_init_ports.
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: OMAP3530/3630 DSP Recomendations
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP3530/3630 DSP Recomendations
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: remove netif_trans_update
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/4] cpufreq: Introduce TI CPUFreq/OPP Driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v5 0/4] cpufreq: Introduce TI CPUFreq/OPP Driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omapfb: dss: Handle return error in dss_init_ports.
  • From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix pmic for boards that need vmmc1 on reboot
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH] net: ethernet: ti: cpsw: remove netif_trans_update
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCHv2] regulator: cpcap: Add basic regulator support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL] few omap late dts changes for v4.11 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omapfb: dss: Handle return error in dss_init_ports.
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix pmic for boards that need vmmc1 on reboot
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH v5 0/6] usb: musb: cppi41: Add a way to manage DMA irq
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v5 5/6] usb: musb: cppi_dma: Clean up tusb_omap_dma structure
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 0/5] PCI: dwc: miscellaneous cleanups and fixes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v5 5/6] usb: musb: cppi_dma: Clean up tusb_omap_dma structure
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v5 6/6] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/2] DTS: dra7: Replace obsolete "operating-points" property with "operating-points-v2"
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 0/5] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v4 0/5] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v4 0/5] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] ARM: dts: Add keypad support for droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Configure regulators for droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "regulator: cpcap: Add basic regulator support" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v5 0/4] cpufreq: Introduce TI CPUFreq/OPP Driver
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] power: bq24190_charger: Check the interrupt status on resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv3 0/2] Two bq24190 PM improvments
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] PCI: dwc: miscellaneous cleanups and fixes
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v5 3/4] cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v5 4/4] cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v5 1/4] PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v5 0/4] cpufreq: Introduce TI CPUFreq/OPP Driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 1/2] DTS: dra7: Replace obsolete "operating-points" property with "operating-points-v2"
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Nishanth Menon <nm@xxxxxx>
• Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH 1/2] DTS: dra7: Replace obsolete "operating-points" property with "operating-points-v2"
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH] omapfb: dss: Handle return error in dss_init_ports.
  • From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] power: bq24190_charger: Check the interrupt status on resume
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• [PATCHv2] regulator: cpcap: Add basic regulator support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] regulator: cpcap: Add basic regulator support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am335x-chiliboard: Support power button
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: am335x-chiliboard: Support power button
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: am335x-chiliboard: Support charger
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH v8.2 1/1] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v8.2 1/1] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v8.1 1/1] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: cpcap: Add basic regulator support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: fix NULL pointer dereference in switch mode
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: fix NULL pointer dereference in switch mode
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] regulator: cpcap: Add basic regulator support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: cpcap: Add basic regulator support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Applied "regulator: palmas-regulator: constify regulator_ops structure" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "regulator: pbias-regulator: constify regulator_ops structure" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 1/1] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: cpcap: Add basic regulator support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v8.1 1/1] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] regulator: palmas-regulator: constify regulator_ops structure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 1/1] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 1/1] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] net: ethernet: ti: cpsw: fix NULL pointer dereference in switch mode
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: omapdrm with n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm with n900
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: omapdrm with n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm with n900
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/3] mmc: host: omap_hsmmc: use generic_cmd6_time to program timeout value for CMD6
  • From: Ravikumar <rk@xxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/3] mmc: host: omap_hsmmc: miscellaneous fixes
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/3] mmc: host: omap_hsmmc: use generic_cmd6_time to program timeout value for CMD6
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/3] mmc: host: omap_hsmmc: miscellaneous fixes
  • From: Ravikumar <rk@xxxxxx>
• Re: [PATCH 0/3] mmc: host: omap_hsmmc: miscellaneous fixes
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/3] mmc: host: omap_hsmmc: use generic_cmd6_time to program timeout value for CMD6
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH V2 07/12] PM / OPP: Update OPP users to put reference
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• RE: [PATCH V2 07/12] PM / OPP: Update OPP users to put reference
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• [PATCH] regulator: cpcap: Add basic regulator support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] power: bq24190_charger: Check the interrupt status on resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/2] Two bq24190 PM improvments
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] fbdev: omap/lcd: Remove no-op driver callbacks
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/3] mmc: host: omap_hsmmc: avoid possible overflow of timeout value
  • From: Ravikumar Kattekola <rk@xxxxxx>
• [PATCH 1/3] mmc: host: omap_hsmmc: reset cmd line on ceb error
  • From: Ravikumar Kattekola <rk@xxxxxx>
• [PATCH 2/3] mmc: host: omap_hsmmc: use generic_cmd6_time to program timeout value for CMD6
  • From: Ravikumar Kattekola <rk@xxxxxx>
• [PATCH 0/3] mmc: host: omap_hsmmc: miscellaneous fixes
  • From: Ravikumar Kattekola <rk@xxxxxx>
• Re: [GIT PULL 1/5] non-urgent omap fixes for v4.11 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 4/5] omap device tree changes for v4.11 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 5/5] omap defconfig changes for v4.11 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 2/5] omap soc changes for v4.11 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 3/5] omap wkup_m3_ipc driver changes for v4.11 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix pmic for boards that need vmmc1 on reboot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• OMAP3630 Smartreflex on Linux 4.10-rc5
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] mfd: twl4030-power: Fix pmic for boards that need vmmc1 on reboot
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] pcie: ti: Provide patch to force GEN1 PCIe operation
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v9 6/8] drivers:input:ads7846(+tsc2046): fix spi module table
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [Letux-kernel] [PATCH v9 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] regulator: pbias-regulator: constify regulator_ops structure
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH] regulator: palmas-regulator: constify regulator_ops structure
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH v8 1/1] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v5 1/5] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods
  • From: Bin Liu <b-liu@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: omapdrm with n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: omapdrm with n900
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: omapdrm with n900
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add keypad support for droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Add keypad support for droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH] clk: ti: divider: Add the table parsing to get the best divider value
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: omapdrm with n900
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: omapdrm with n900
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: omapdrm with n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 6/8] ARM: dts: dra7x-evm: Enable dual-role mode for USB1
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/8] ARM: dts: dra7x-evm: Enable dual-role mode for USB1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/7] drivers/gpio: Add and export gpiod_lookup[_index]
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: omapdrm with n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm with n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH] regulator: constify regulator_ops structures
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] regulator: constify regulator_ops structures
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] regulator: constify regulator_ops structures
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCHv4] mfd: cpcap: Add minimal support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] regulator: constify regulator_ops structures
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: omapdrm with n900
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: omapdrm with n900
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: omapdrm with n900
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Al Stone <ahs3@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCHv4] mfd: cpcap: Add minimal support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm with n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Al Stone <ahs3@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] i2c: busses: constify dev_pm_ops structures
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: omapdrm with n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Furquan Shaikh <furquan@xxxxxxxxxxxx>
• Re: [PATCH] clk: ti: divider: Add the table parsing to get the best divider value
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 6/7] drivers/gpio: Add and export gpiod_lookup[_index]
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v3] ARM: davinci: Make the usb20 clock available to PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 2/7] ACPI / property: have acpi_get_next_subnode take fwnode_handle
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] clk: ti: divider: Add the table parsing to get the best divider value
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v5 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 1/5] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 2/5] usb: musb: Use shared irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 0/5] usb: musb: da8xx: Add DMA support
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 4/6] usb: musb: cppi_dma: Clean up cppi41_dma_controller structure
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 2/6] usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback()
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 5/6] usb: musb: cppi_dma: Clean up tusb_omap_dma structure
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v5 6/6] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 3/6] usb: musb: cppi_dma: Clean up cppi structure
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 1/6] usb: musb: dma: Add a DMA completion platform callback
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v5 0/6] usb: musb: cppi41: Add a way to manage DMA irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: omapdrm with n900
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv4 0/2] cppi41 dma fixes for v4.10-rc cycle
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 31/37] misc: Add host side pci driver for pci test function device
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• omapdrm with n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] extcon: palmas: Don't spam console
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH 2/7] ACPI / property: have acpi_get_next_subnode take fwnode_handle
  • From: Furquan Shaikh <furquan@xxxxxxxxxxxx>
• [PATCH 1/7] drivers/regulator: Rename of_map_mode to map_mode in regulator desc
  • From: Furquan Shaikh <furquan@xxxxxxxxxxxx>
• [PATCH 3/7] device property: introduce fwnode_for_each_child()
  • From: Furquan Shaikh <furquan@xxxxxxxxxxxx>
• [PATCH 4/7] device property: introduce fwnode_get_named_child_node()
  • From: Furquan Shaikh <furquan@xxxxxxxxxxxx>
• [PATCH 6/7] drivers/gpio: Add and export gpiod_lookup[_index]
  • From: Furquan Shaikh <furquan@xxxxxxxxxxxx>
• [PATCH 7/7] drivers/regulator: Initialize regulator init data for ACPI regulators
  • From: Furquan Shaikh <furquan@xxxxxxxxxxxx>
• [PATCH 5/7] device property: Export dev_fwnode
  • From: Furquan Shaikh <furquan@xxxxxxxxxxxx>
• [PATCH 0/7] Implement generic regulator constraints parsing for ACPI and OF
  • From: Furquan Shaikh <furquan@xxxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Mark Greer <mgreer@xxxxxxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Adam Ford <aford173@xxxxxxxxx>
• [GIT PULL 5/5] omap defconfig changes for v4.11 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 4/5] omap device tree changes for v4.11 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 3/5] omap wkup_m3_ipc driver changes for v4.11 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/5] omap soc changes for v4.11 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/5] non-urgent omap fixes for v4.11 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] regulator: tps65217: Allow DCDC1 and DCDC3 up to 3.3V
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 31/37] misc: Add host side pci driver for pci test function device
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] extcon: palmas: Don't spam console
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2] regulator: tps65217: Allow DCDC1 and DCDC3 up to 3.3V
  • From: Måns Andersson <mans.andersson@xxxxxxx>
• Re: [PATCH v4 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] regulator: tps65217: Allow DCDC1 and DCDC3 up to 3.3V
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] arm: davinci: Make the usb20 clock available to PM runtime
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH v2] arm: davinci: Make the usb20 clock available to PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4] ARM: dts: da850: Add the CPPI 4.1 DMA to the USB OTG controller
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 0/2] thermal: omap: dra752: Remove TSHUT configuration
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH v4 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 2/5] usb: musb: Use shared irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 0/5] usb: musb: da8xx: Add DMA support
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 1/5] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH v2 3/3] ARM: configs: omap2plus_defconfig: Enable support for RTC M41T80
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH v2 2/3] ARM: configs: omap2plus_defconfig: Enable support for micrell phys
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v3 3/3] dmaengine: cppi41: Fix teardown warnings
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 2/3] dmaengine: cppi41: Add support of DA8xx to CPPI 4.1
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 0/3] dmaengine: cppi41: Add dma support to da8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCHv4] mfd: cpcap: Add minimal support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 0/6] usb: musb: cppi41: Add a way to manage DMA irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2] regulator: tps65217: Allow DCDC1 and DCDC3 up to 3.3V
  • From: Måns Andersson <mans.andersson@xxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] power: bq24190_charger: Check the interrupt status on resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: 4.10-rc1 on Nokia N900: regression, WARN_ON() omap_l3_smx.c
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 6/6] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS
  • From: Bin Liu <b-liu@xxxxxx>
• Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• v4.9 to v4.10 regression: oops when USB cable is plugged in.
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCHv3] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option
  • From: Andrew Murray <amurray@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option
  • From: Andrew Murray <amurray@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] Documentation: dt: add bindings for ti-cpufreq
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v3 3/3] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in dsps
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v4 0/6] usb: musb: cppi41: Add a way to manage DMA irq
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v4 4/6] usb: musb: cppi_dma: Clean up cppi41_dma_controller structure
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v4 3/6] usb: musb: cppi_dma: Clean up cppi structure
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option
  • From: Andrew Murray <amurray@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option
  • From: Andrew Murray <amurray@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove duplicate definition of omap_test_timeout
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2] ARM: dts: dra72/1-evm: add pcf8575 used for lcd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] regulator: tps65217: Allow DCDC1 and DCDC3 up to 3.3V
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 3/3] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in dsps
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• [PATCH v4 5/5] dmaengine: cppi41: Remove isr callback from glue layer
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 3/5] dmaengine: cppi41: Move some constants to glue layer
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 1/5] dmaengine: cppi41: Remove usbss_mem
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 5/5] dmaengine: cppi41: Remove isr callbacks from glue layer
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 2/5] dmaengine: cppi41: rename platform variables
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 4/5] dmaengine: cppi41: init_sched(): Get number of channels from DT
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 0/5] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 6/6] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 3/6] usb: musb: cppi_dma: Clean up cppi structure
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 5/6] usb: musb: cppi_dma: Clean up tusb_omap_dma structure
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 4/6] usb: musb: cppi_dma: Clean up cppi41_dma_controller structure
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 0/6] usb: musb: cppi41: Add a way to manage DMA irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 2/6] usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback()
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v4 1/6] usb: musb: dma: Add a DMA completion platform callback
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCHv4] mfd: cpcap: Add minimal support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] thermal: omap: dra752: Remove TSHUT configuration
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove duplicate definition of omap_test_timeout
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dmaengine: cppi41: Add support of DA8xx to CPPI 4.1
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: musb: dma: Add a DMA completion platform callback
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove duplicate definition of omap_test_timeout
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• v4.10-rc4 to v4.10-rc5: battery regression on Nokia N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 0/8] usb: dwc3: add dual-role support
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [PATCH 8/8] ARM: dts: am57xx-idk: Enable dual-role mode for USB2
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 7/8] ARM: dts: am43xx: Enable dual-role mode for USB1
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 5/8] usb: dwc3: add dual-role support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/8] usb: otg-fsm: Prevent build warning "VDBG" redefined
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 4/8] usb: dwc3: core.h: add some register definitions
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/8] usb: dwc3: add dual-role support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/8] usb: dwc3: use BIT() macro where possible
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 6/8] ARM: dts: dra7x-evm: Enable dual-role mode for USB1
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/8] usb: dwc3-omap: Fix missing break in dwc3_omap_set_mailbox()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] regulator: tps65217: Allow DCDC1 and DCDC3 up to 3.3V
  • From: MÃ¥ns@xxxxxxxxxxxxxxx, Andersson@xxxxxxxxxxxxxxx
• Re: [PATCH 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Remove duplicate definition of omap_test_timeout
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v3 3/3] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in dsps
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH V2 07/12] PM / OPP: Update OPP users to put reference
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 1/2] power: bq24190_charger: Check the interrupt status on resume
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 1/2] power: bq24190_charger: Check the interrupt status on resume
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option
  • From: Andrew Murray <amurray@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] fbdev: omap/lcd: Remove no-op driver callbacks
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 3/3] fbdev: omap/lcd: Make callbacks optional
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 2/3] fbdev: omap/lcd: Staticize non-exported lcd_panel structs
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v9 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] power: bq24190_charger: Check the interrupt status on resume
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] power: bq24190_charger: Check the interrupt status on resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] power: bq24190_charger: Use PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Two bq24190 PM improvments
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4 3/2] dmaengine: cppi41: Clean up pointless warnings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: phy: Implement am335x advisory 1.0.34
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4 3/2] dmaengine: cppi41: Clean up pointless warnings
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: phy: Implement am335x advisory 1.0.34
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] serial: 8250_omap: Fix probe and remove for PM runtime
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in dsps
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv4 3/2] dmaengine: cppi41: Clean up pointless warnings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] usb: phy: Implement am335x advisory 1.0.34
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: musb: dma: Add a DMA completion platform callback
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH v2] ARM: dts: dra72/1-evm: add pcf8575 used for lcd
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• RE: OMAP3 DM3730 1GHz mainline support
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH] ARM: dts: dra72/1-evm: add pcf8575 used for lcd
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: Nokia N900: microphone mixers
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] usb: musb: Fix external abort on non-linefetch for musb_irq_work()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] usb: musb: Fix host mode error -71 regression
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] ARM: OMAP2+: Remove duplicate definition of omap_test_timeout
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra72/1-evm: add pcf8575 used for lcd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] Documentation: dt: add bindings for ti-cpufreq
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/5] ARM: OMAP2+: Add earlycon support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] ARM: dts: am335x-sl50: Update to new hardware
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] serial: omap: Add omapserial earlycon
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] misc: sram: Introduce protect-exec region type
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 36/37] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 37/37] ARM: dts: DRA7: Add pcie1 dt node for EP mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix SoC detection of OMAP36/37 Family
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: omap3: Fix Reboot issue on Logic PD SOM-LV
  • From: aford173@xxxxxxxxx
• Re: [PATCH v2 0/5] net: ethernet: ti: cpsw: correct common res usage
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCHv4 0/2] cppi41 dma fixes for v4.10-rc cycle
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v3 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCHv4 0/2] cppi41 dma fixes for v4.10-rc cycle
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] ARM: OMAP3: Fix SoC detection of OMAP36/37 Family
  • From: aford173@xxxxxxxxx
• Re: [PATCH v3 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: Nokia N900: microphone mixers
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: Nokia N900: microphone mixers
  • From: Pavel Machek <pavel@xxxxxx>
• Nokia N900: microphone mixers
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Nokia N900: microphone mixers
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v11 08/14] usb: otg: add OTG/dual-role core
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: davinci: Make the usb20 clock available to PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH] arm: davinci: Make the usb20 clock available to PM runtime
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 2/7] usb: usb: dsps: update device tree bindings
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v11 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/3] tty: serial: 8250_omap: Enable DMA support
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: [PATCH v3 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: OMAP3 DM3730 1GHz mainline support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3 DM3730 1GHz mainline support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: OMAP3 DM3730 1GHz mainline support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: OMAP3 DM3730 1GHz mainline support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3 DM3730 1GHz mainline support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCHv2] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Nokia N900: mixers changed between 4.9 and 4.10-rc3, no longer can use in-call speaker
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH v2 0/5] net: ethernet: ti: cpsw: correct common res usage
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Applied "regulator: twl6030: fix range comparison, allowing vsel = 59" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/4] Documentation: dt: add bindings for ti-cpufreq
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/4] Documentation: dt: add bindings for ti-cpufreq
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v3 2/3] dmaengine: cppi41: Add support of DA8xx to CPPI 4.1
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/7] usb: usb: dsps: update device tree bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 0/5] net: ethernet: ti: cpsw: correct common res usage
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] arm: davinci: Make the usb20 clock available to PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: Size 1 dma in transfers won't complete with cpp41
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH v2 1/5] net: ethernet: ti: cpsw: remove dual check from common res usage function
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: Size 1 dma in transfers won't complete with cpp41
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 5/5] net: ethernet: ti: cpsw: clarify ethtool ops changing num of descs
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v2 3/5] net: ethernet: ti: cpsw: don't duplicate ndev_running
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH 2/2] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 2/5] net: ethernet: ti: cpsw: don't disable interrupts in ndo_open
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v2 4/5] net: ethernet: ti: cpsw: don't duplicate common res in rx handler
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH 1/2] dmaengine: cppi41: Fix runtime PM timeouts with USB mass storage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/4] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv4 0/2] cppi41 dma fixes for v4.10-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: davinci: Make the usb20 clock available to PM runtime
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: Size 1 dma in transfers won't complete with cpp41
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: Size 1 dma in transfers won't complete with cpp41
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v3 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: Size 1 dma in transfers won't complete with cpp41
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] tty: serial: 8250_omap: Enable DMA support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 08/14] usb: otg: add OTG/dual-role core
  • From: vivek.gautam@xxxxxxxxxxxxxx
• Re: [PATCH] arm: davinci: Make the usb20 clock available to PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: Size 1 dma in transfers won't complete with cpp41
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: OMAP2+: omap_hwmod: Add support for earlycon
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] tty: serial: 8250_omap: Enable DMA support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: davinci: Make the usb20 clock available to PM runtime
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH] ARM: dts: da850: Add the CPPI 4.1 DMA to the USB OTG controller
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v11 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] arm: davinci: Make the usb20 clock available to PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 2/5] usb: musb: Use shared irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 1/5] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 0/5] usb: musb: da8xx: Add DMA support
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 0/3] tty: serial: 8250_omap: Enable DMA support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 3/3] ARM: configs: omap2plus_defconfig: Enable support for RTC M41T80
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 2/3] ARM: configs: omap2plus_defconfig: Enable support for micrell phys
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: dwc3 gadget breaks on system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v11 08/14] usb: otg: add OTG/dual-role core
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• dwc3 gadget breaks on system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 3/3] dmaengine: cppi41: Fix teardown warnings
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 2/3] dmaengine: cppi41: Add support of DA8xx to CPPI 4.1
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 0/3] dmaengine: cppi41: Add dma support to da8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v3 4/4] dmaengine: cppi41: init_sched(): Get number of channels from DT
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: musb: dma: Add a DMA completion platform callback
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/4] dmaengine: cppi41: init_sched(): Get number of channels from DT
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 2/4] dmaengine: cppi41: rename platform variables
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 0/4] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 3/4] dmaengine: cppi41: Move some constants to glue layer
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 1/4] dmaengine: cppi41: Remove usbss_mem
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v3 3/3] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in dsps
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: OMAP2+: omap_hwmod: Add support for earlycon
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v3 1/3] usb: musb: dma: Add a DMA completion platform callback
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 2/3] usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback()
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v3 0/3] usb: musb: cppi41: Add a way to manage DMA irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH] serial: omap: Add omapserial earlycon
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v8] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: Size 1 dma in transfers won't complete with cpp41
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 2/2] usb: musb: Size 1 dma in transfers won't complete with cpp41
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] usb: musb: Fix host mode error -71 regression
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/2] Two musb fixes for v4.10-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Nokia N900: mixers changed between 4.9 and 4.10-rc3, no longer can use in-call speaker
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 2/2] usb: musb: Tiny dma in transfers won't complete with cpp41
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] usb: musb: Tiny dma in transfers won't complete with cpp41
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] usb: musb: Fix host mode error -71 regression
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Two musb fixes for v4.10-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap fixes for v4.10-rc4
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Bin Liu <b-liu@xxxxxx>
• Re: Nokia N900: mixers changed between 4.9 and 4.10-rc3, no longer can use in-call speaker
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] ARM: dts: dra72/1-evm: add pcf8575 used for lcd
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 30/37] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 28/37] dt-bindings: PCI: dra7xx: Add dt bindings for pci dra7xx EP mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 25/37] dt-bindings: PCI: Add dt bindings for pci designware EP mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: davinci_cpdma: correct check on NULL in set rate
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Nokia N900: mixers changed between 4.9 and 4.10-rc3, no longer can use in-call speaker
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: musb: cppi41: Add new functions for platform driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 1/2] usb: musb: cppi41: Add new functions for platform driver
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v8] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Matt Ranostay <matt@ranostay.consulting>
• Re: [PATCH 1/2] ARM: dts: dra7-evm: increase QSPI SPL partition size
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: musb: cppi41: Add new functions for platform driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] tty: serial: 8250_omap: Enable DMA support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: OMAP2+: omap_hwmod: Add support for earlycon
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 1/2] usb: musb: cppi41: Add new functions for platform driver
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v2 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: L3 custom error crash
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCH 0/3] tty: serial: 8250_omap: Enable DMA support
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: dra7-evm: increase QSPI SPL partition size
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH v8] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Matt Ranostay <matt@ranostay.consulting>
• [PATCH v2 1/5] ARM: OMAP2+: omap_hwmod: Add support for earlycon
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 0/5] ARM: OMAP2+: Add earlycon support
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH 1/5] ARM: OMAP2+: omap_hwmod: Add support for earlycon
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 4/5] ARM: dts: am57xx: Add stdout-path property
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 5/5] ARM: dts: dra7xx: Add stdout-path property
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 3/5] ARM: dts: am43xx: Add stdout-path property
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH v2 2/5] ARM: dts: am33xx: Add stdout-path property
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• Re: [PATCH v4 1/4] PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v4 4/4] cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v4 3/4] cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v4 2/4] Documentation: dt: add bindings for ti-cpufreq
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 3/4] net: ethernet: ti: cpsw: don't duplicate ndev_running
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH] net: ethernet: ti: davinci_cpdma: correct check on NULL in set rate
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [GIT PULL] omap fixes for v4.10-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: musb: cppi41: Add new functions for platform driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] tty: serial: 8250_omap: Enable DMA support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: OMAP2+: omap_hwmod: Add support for earlycon
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: dra7-evm: increase QSPI SPL partition size
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: busses: constify dev_pm_ops structures
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: L3 custom error crash
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
  • From: Matt Ranostay <matt@ranostay.consulting>
• [PATCHv2] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM:DTS:OMAP3:Fix Card Detect and Write Protect on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM:DTS:OMAP3:Fix Card Detect and Write Protect on Logic PD SOM-LV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Fix wl12xx missing clocks that cause hangs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] ARM: dts: Fix wl12xx missing clocks that cause hangs
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: L3 custom error crash
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCHv2] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM:DTS:OMAP3:Fix Card Detect and Write Protect on Logic PD SOM-LV
  • From: Adam Ford <aford173@xxxxxxxxx>
• L3 custom error crash
  • From: Ran Shalit <ranshalit@xxxxxxxxx>
• Re: [PATCH v2 2/5] usb: musb: Use shared irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCHv3] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] dmaengine: cppi41: init_sched(): Get number of channels from DT
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] usb: musb: Use shared irq
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in dsps
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 6/7] dmaengine: cppi41: init_sched(): Get number of channels from DT
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v2 0/7] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/5] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am33x, da816x, da814x: Remove useless register address
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 0/7] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/5] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am33x, da816x, da814x: Remove useless register address
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCHv2] dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/7] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/7] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am33x, da816x, da814x: Remove useless register address
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] can: ti_hecc: Add DT support for TI HECC module
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: dts: da850: Add the CPPI 4.1 DMA to the USB OTG controller
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH] usb: musb: constify dev_pm_ops structures
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH v2 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v2 5/5] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>