Many Motorola phones like droid 4 are using a custom PMIC called CPCAP
or 6556002. This PMIC is used with several SoCs, I've noticed at least
omap3, omap4 and Tegra2 based Motorola phones and tablets using it.
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Marcel Partap <mpartap@xxxxxxx>
Cc: Michael Scott <michael.scott@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
With the cpcap core MFD driver now in Linux next as commit
3d66c8abc13e ("mfd: cpcap: Add minimal support"), here's a related
regulator driver. This is needed to support more devices on droid 4,
such as the LCD and touchscreen.
Changes since v1:
- Use standard regulator sel_regmap functions and drop the pointless
custom implementations as commented by Mark Brown
- Fix unit-address with no reg property as commented by Rob Herring
---
.../bindings/regulator/cpcap-regulator.txt | 34 ++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/cpcap-regulator.c | 464 +++++++++++++++++++++
4 files changed, 506 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
create mode 100644 drivers/regulator/cpcap-regulator.c
diff --git a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
new file mode 100644
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
@@ -0,0 +1,34 @@
+Motorola CPCAP PMIC voltage regulators
+------------------------------------
+
+Requires node properties:
+- "compatible" value one of:
+ "motorola,cpcap-regulator"
+ "motorola,mapphone-cpcap-regulator"
+
+Required regulator properties:
+- "regulator-name"
+- "regulator-enable-ramp-delay"
+- "regulator-min-microvolt"
+- "regulator-max-microvolt"
+
+Optional regulator properties:
+- "regulator-boot-on"
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+Example:
+
+cpcap_regulator: regulator {
+ compatible = "motorola,cpcap-regulator";
+
+ cpcap_regulators: regulators {
+ sw5: SW5 {
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ regulator-enable-ramp-delay = <50000>;
+ regulator-boot-on;
+ };
+ };
+};
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -163,6 +163,13 @@ config REGULATOR_BCM590XX
BCM590xx PMUs. This will enable support for the software
controllable LDO/Switching regulators.
+config REGULATOR_CPCAP
+ tristate "Motorola CPCAP regulator"
+ depends on MFD_CPCAP
+ help
+ Say y here for CPCAP regulator found on some Motorola phones
+ and tablets such as Droid 4.
+
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
diff --git a/drivers/regulator/cpcap-regulator.c b/drivers/regulator/cpcap-regulator.c
new file mode 100644
--- /dev/null
+++ b/drivers/regulator/cpcap-regulator.c
@@ -0,0 +1,464 @@
+/*
+ * Motorola CPCAP PMIC regulator driver
+ *
+ * Based on cpcap-regulator.c from Motorola Linux kernel tree
+ * Copyright (C) 2009-2011 Motorola, Inc.
+ *
+ * Rewritten for mainline kernel to use device tree and regmap
+ * Copyright (C) 2017 Tony Lindgren <tony@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/*
+ * Resource assignment register bits. These seem to control the state
+ * idle modes adn are used at least for omap4.
+ */
+
+/* CPCAP_REG_ASSIGN2 bits - Resource Assignment 2 */
+#define CPCAP_BIT_VSDIO_SEL BIT(15)
+#define CPCAP_BIT_VDIG_SEL BIT(14)
+#define CPCAP_BIT_VCAM_SEL BIT(13)
+#define CPCAP_BIT_SW6_SEL BIT(12)
+#define CPCAP_BIT_SW5_SEL BIT(11)
+#define CPCAP_BIT_SW4_SEL BIT(10)
+#define CPCAP_BIT_SW3_SEL BIT(9)
+#define CPCAP_BIT_SW2_SEL BIT(8)
+#define CPCAP_BIT_SW1_SEL BIT(7)
+
+/* CPCAP_REG_ASSIGN3 bits - Resource Assignment 3 */
+#define CPCAP_BIT_VUSBINT2_SEL BIT(15)
+#define CPCAP_BIT_VUSBINT1_SEL BIT(14)
+#define CPCAP_BIT_VVIB_SEL BIT(13)
+#define CPCAP_BIT_VWLAN1_SEL BIT(12)
+#define CPCAP_BIT_VRF1_SEL BIT(11)
+#define CPCAP_BIT_VHVIO_SEL BIT(10)
+#define CPCAP_BIT_VDAC_SEL BIT(9)
+#define CPCAP_BIT_VUSB_SEL BIT(8)
+#define CPCAP_BIT_VSIM_SEL BIT(7)
+#define CPCAP_BIT_VRFREF_SEL BIT(6)
+#define CPCAP_BIT_VPLL_SEL BIT(5)
+#define CPCAP_BIT_VFUSE_SEL BIT(4)
+#define CPCAP_BIT_VCSI_SEL BIT(3)
+#define CPCAP_BIT_SPARE_14_2 BIT(2)
+#define CPCAP_BIT_VWLAN2_SEL BIT(1)
+#define CPCAP_BIT_VRF2_SEL BIT(0)
+
+/* CPCAP_REG_ASSIGN4 bits - Resource Assignment 4 */
+#define CPCAP_BIT_VAUDIO_SEL BIT(0)
+
+/*
+ * Enable register bits. At least CPCAP_BIT_AUDIO_LOW_PWR is generic,
+ * and not limited to audio regulator. Let's use the Motorola kernel
+ * naming for now until we have a better understanding of the other
+ * enable register bits. No idea why BIT(3) is not defined.
+ */
+#define CPCAP_BIT_AUDIO_LOW_PWR BIT(6)
+#define CPCAP_BIT_AUD_LOWPWR_SPEED BIT(5)
+#define CPCAP_BIT_VAUDIOPRISTBY BIT(4)
+#define CPCAP_BIT_VAUDIO_MODE1 BIT(2)
+#define CPCAP_BIT_VAUDIO_MODE0 BIT(1)
+#define CPCAP_BIT_V_AUDIO_EN BIT(0)
+
+/*
+ * Off mode configuration bit. Used currently only by SW5 on omap4. There's
+ * the following comment in Motorola Linux kernel tree for it:
+ *
+ * When set in the regulator mode, the regulator assignment will be changed
+ * to secondary when the regulator is disabled. The mode will be set back to
+ * primary when the regulator is turned on.
+ */
+#define CPCAP_REG_OFF_MODE_SEC BIT(15)
+
+/**
+ * SoC specific configuraion for CPCAP regulator. There are at least three
+ * different SoCs each with their own parameters: omap3, omap4 and tegra2.
+ *
+ * The assign_reg and assign_mask seem to allow toggling between primary
+ * and secondary mode that at least omap4 uses for off mode.
+ */
+struct cpcap_regulator {
+ struct regulator_desc rdesc;
+ const u16 assign_reg;
+ const u16 assign_mask;
+ const u16 vsel_shift;
+};
+
+#define CPCAP_REG(_ID, reg, assignment_reg, assignment_mask, val_tbl, \
+ mode_mask, volt_mask, volt_shft, \
+ mode_val, off_val, volt_trans_time) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .of_match = of_match_ptr(#_ID), \
+ .ops = &cpcap_regulator_ops, \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = CPCAP_##_ID, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(val_tbl), \
+ .volt_table = (val_tbl), \
+ .vsel_reg = (reg), \
+ .vsel_mask = (volt_mask), \
+ .enable_reg = (reg), \
+ .enable_mask = (mode_mask), \
+ .enable_val = (mode_val), \
+ .disable_val = (off_val), \
+ .ramp_delay = (volt_trans_time), \
+ }, \
+ .assign_reg = (assignment_reg), \
+ .assign_mask = (assignment_mask), \
+ .vsel_shift = (volt_shft), \
+}
+
+struct cpcap_ddata {
+ struct regmap *reg;
+ struct device *dev;
+ const struct cpcap_regulator *soc;
+};
+
+enum cpcap_regulator_id {
+ CPCAP_SW1,
+ CPCAP_SW2,
+ CPCAP_SW3,
+ CPCAP_SW4,
+ CPCAP_SW5,
+ CPCAP_SW6,
+ CPCAP_VCAM,
+ CPCAP_VCSI,
+ CPCAP_VDAC,
+ CPCAP_VDIG,
+ CPCAP_VFUSE,
+ CPCAP_VHVIO,
+ CPCAP_VSDIO,
+ CPCAP_VPLL,
+ CPCAP_VRF1,
+ CPCAP_VRF2,
+ CPCAP_VRFREF,
+ CPCAP_VWLAN1,
+ CPCAP_VWLAN2,
+ CPCAP_VSIM,
+ CPCAP_VSIMCARD,
+ CPCAP_VVIB,
+ CPCAP_VUSB,
+ CPCAP_VAUDIO,
+ CPCAP_NR_REGULATORS,
+};
+
+/*
+ * We need to also configure regulator idle mode for SoC off mode if
+ * CPCAP_REG_OFF_MODE_SEC is set.
+ */
+static int cpcap_regulator_enable(struct regulator_dev *rdev)
+{
+ struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
+ int error, ignore;
+
+ error = regulator_enable_regmap(rdev);
+ if (error)
+ return error;
+
+ if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) {
+ error = regmap_update_bits(rdev->regmap, regulator->assign_reg,
+ regulator->assign_mask,
+ regulator->assign_mask);
+ if (error)
+ ignore = regulator_disable_regmap(rdev);
+ }
+
+ return error;
+}
+
+/*
+ * We need to also configure regulator idle mode for SoC off mode if
+ * CPCAP_REG_OFF_MODE_SEC is set.
+ */
+static int cpcap_regulator_disable(struct regulator_dev *rdev)
+{
+ struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
+ int error, ignore;
+
+ if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) {
+ error = regmap_update_bits(rdev->regmap, regulator->assign_reg,
+ regulator->assign_mask, 0);
+ if (error)
+ return error;
+ }
+
+ error = regulator_disable_regmap(rdev);
+ if (error && (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC)) {
+ ignore = regmap_update_bits(rdev->regmap, regulator->assign_reg,
+ regulator->assign_mask,
+ regulator->assign_mask);
+ }
+
+ return error;
+}
+
+static unsigned int cpcap_regulator_get_mode(struct regulator_dev *rdev)
+{
+ int value;
+
+ regmap_read(rdev->regmap, rdev->desc->enable_reg, &value);
+
+ if (!(value & CPCAP_BIT_AUDIO_LOW_PWR))
+ return REGULATOR_MODE_STANDBY;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int cpcap_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ int value;
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ value = CPCAP_BIT_AUDIO_LOW_PWR;
+ break;
+ case REGULATOR_MODE_STANDBY:
+ value = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ CPCAP_BIT_AUDIO_LOW_PWR, value);
+}
+
+static struct regulator_ops cpcap_regulator_ops = {
+ .enable = cpcap_regulator_enable,
+ .disable = cpcap_regulator_disable,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_mode = cpcap_regulator_get_mode,
+ .set_mode = cpcap_regulator_set_mode,
+};
+
+static const unsigned int unknown_val_tbl[] = { 0, };
+static const unsigned int sw5_val_tbl[] = { 0, 5050000, };
+static const unsigned int vcam_val_tbl[] = { 2600000, 2700000, 2800000,
+ 2900000, };
+static const unsigned int vcsi_val_tbl[] = { 1200000, 1800000, };
+static const unsigned int vdac_val_tbl[] = { 1200000, 1500000, 1800000,
+ 2500000,};
+static const unsigned int vdig_val_tbl[] = { 1200000, 1350000, 1500000,
+ 1875000, };
+static const unsigned int vfuse_val_tbl[] = { 1500000, 1600000, 1700000,
+ 1800000, 1900000, 2000000,
+ 2100000, 2200000, 2300000,
+ 2400000, 2500000, 2600000,
+ 2700000, 3150000, };
+static const unsigned int vhvio_val_tbl[] = { 2775000, };
+static const unsigned int vsdio_val_tbl[] = { 1500000, 1600000, 1800000,
+ 2600000, 2700000, 2800000,
+ 2900000, 3000000, };
+static const unsigned int vpll_val_tbl[] = { 1200000, 1300000, 1400000,
+ 1800000, };
+/* Quirk: 2775000 is before 2500000 for vrf1 regulator */
+static const unsigned int vrf1_val_tbl[] = { 2775000, 2500000, };
+static const unsigned int vrf2_val_tbl[] = { 0, 2775000, };
+static const unsigned int vrfref_val_tbl[] = { 2500000, 2775000, };
+static const unsigned int vwlan1_val_tbl[] = { 1800000, 1900000, };
+static const unsigned int vwlan2_val_tbl[] = { 2775000, 3000000, 3300000,
+ 3300000, };
+static const unsigned int vsim_val_tbl[] = { 1800000, 2900000, };
+static const unsigned int vsimcard_val_tbl[] = { 1800000, 2900000, };
+static const unsigned int vvib_val_tbl[] = { 1300000, 1800000, 2000000,
+ 3000000, };
+static const unsigned int vusb_val_tbl[] = { 0, 3300000, };
+static const unsigned int vaudio_val_tbl[] = { 0, 2775000, };
+
+/**
+ * SoC specific configuration for omap4. The data below is comes from Motorola
+ * Linux kernel tree. It's basically the values of cpcap_regltr_data,
+ * cpcap_regulator_mode_values and cpcap_regulator_off_mode_values, see
+ * CPCAP_REG macro above.
+ *
+ * SW1 to SW4 and SW6 seems to be unused for mapphone. Note that VSIM and
+ * VSIMCARD have a shared resource assignment bit.
+ */
+static struct cpcap_regulator omap4_regulators[] = {
+ CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW1_SEL, unknown_val_tbl,
+ 0, 0, 0, 0, 0, 0),
+ CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW2_SEL, unknown_val_tbl,
+ 0, 0, 0, 0, 0, 0),
+ CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW3_SEL, unknown_val_tbl,
+ 0, 0, 0, 0, 0, 0),
+ CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW4_SEL, unknown_val_tbl,
+ 0, 0, 0, 0, 0, 0),
+ CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW5_SEL, sw5_val_tbl,
+ 0x28, 0, 0, 0x20 | CPCAP_REG_OFF_MODE_SEC, 0, 0),
+ CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_SW6_SEL, unknown_val_tbl,
+ 0, 0, 0, 0, 0, 0),
+ CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
+ 0x87, 0x30, 4, 0x3, 0, 420),
+ CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
+ 0x47, 0x10, 4, 0x43, 0x41, 350),
+ CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
+ 0x87, 0x30, 4, 0x3, 0, 420),
+ CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
+ 0x87, 0x30, 4, 0x82, 0, 420),
+ CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
+ 0x80, 0xf, 0, 0x80, 0, 420),
+ CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
+ 0x17, 0, 0, 0, 0x12, 0),
+ CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
+ CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
+ 0x87, 0x38, 3, 0x82, 0, 420),
+ CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
+ 0x43, 0x18, 3, 0x2, 0, 420),
+ CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
+ 0xac, 0x2, 1, 0x4, 0, 10),
+ CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
+ 0x23, 0x8, 3, 0, 0, 10),
+ CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
+ 0x23, 0x8, 3, 0, 0, 420),
+ CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
+ 0x47, 0x10, 4, 0, 0, 420),
+ CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
+ 0x20c, 0xc0, 6, 0x20c, 0, 420),
+ CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+ 0xffff, vsim_val_tbl,
+ 0x23, 0x8, 3, 0x3, 0, 420),
+ CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
+ 0xffff, vsimcard_val_tbl,
+ 0x1e80, 0x8, 3, 0x1e00, 0, 420),
+ CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
+ 0x1, 0xc, 2, 0x1, 0, 500),
+ CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
+ CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
+ 0x11c, 0x40, 6, 0xc, 0, 0),
+ CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
+ CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
+ 0x16, 0x1, 0, 0x4, 0, 0),
+ { /* sentinel */ },
+};
+
+static const struct of_device_id cpcap_regulator_id_table[] = {
+ {
+ .compatible = "motorola,cpcap-regulator",
+ },
+ {
+ .compatible = "motorola,mapphone-cpcap-regulator",
+ .data = omap4_regulators,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cpcap_regulator_id_table);
+
+static int cpcap_regulator_probe(struct platform_device *pdev)
+{
+ struct cpcap_ddata *ddata;
+ const struct of_device_id *match;
+ struct regulator_config config;
+ struct regulator_init_data init_data;
+ int i;
+
+ match = of_match_device(of_match_ptr(cpcap_regulator_id_table),
+ &pdev->dev);
+ if (!match)
+ return -EINVAL;
+
+ if (!match->data) {
+ dev_err(&pdev->dev, "no configuration data found\n");
+
+ return -ENODEV;
+ }
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->reg = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!ddata->reg)
+ return -ENODEV;
+
+ ddata->dev = &pdev->dev;
+ ddata->soc = match->data;
+ platform_set_drvdata(pdev, ddata);
+
+ memset(&config, 0, sizeof(config));
+ memset(&init_data, 0, sizeof(init_data));
+ config.dev = &pdev->dev;
+ config.regmap = ddata->reg;
+ config.init_data = &init_data;
+
+ for (i = 0; i < CPCAP_NR_REGULATORS; i++) {
+ const struct cpcap_regulator *regulator = &ddata->soc[i];
+ struct regulator_dev *rdev;
+
+ if (!regulator->rdesc.name)
+ break;
+
+ if (regulator->rdesc.volt_table == unknown_val_tbl)
+ continue;
+
+ config.driver_data = (void *)regulator;
+ rdev = devm_regulator_register(&pdev->dev,
+ ®ulator->rdesc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ regulator->rdesc.name);
+
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver cpcap_regulator_driver = {
+ .probe = cpcap_regulator_probe,
+ .driver = {
+ .name = "cpcap-regulator",
+ .of_match_table = of_match_ptr(cpcap_regulator_id_table),
+ },
+};
+
+module_platform_driver(cpcap_regulator_driver);
+
+MODULE_ALIAS("platform:cpcap-regulator");
+MODULE_AUTHOR("Tony Lindgren <tony@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("CPCAP regulator driver");
+MODULE_LICENSE("GPL v2");
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
