On Mon, Jan 30, 2017 at 4:36 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> From: Tony Lindgren <tony@xxxxxxxxxxx>
> Date: Mon, 30 Jan 2017 07:10:31 -0800
> Subject: [PATCH] power: bq24190_charger: Use PM runtime autosuspend
>
> We can get quite a few interrupts when the battery is trickle charging.
> Let's enable PM runtime autosuspend to avoid constantly toggling device
> driver PM runtime state.
>
> Let's use a 600 ms timeout as that's how long the USB chager detection
> might take.
>
> Cc: Liam Breck <kernel@xxxxxxxxxxxxxxxxx>
> Acked-by: Mark Greer <mgreer@xxxxxxxxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> drivers/power/supply/bq24190_charger.c | 153 ++++++++++++++++++++++++---------
> 1 file changed, 111 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -420,6 +420,7 @@ static ssize_t bq24190_sysfs_show(struct device *dev,
> struct power_supply *psy = dev_get_drvdata(dev);
> struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
> struct bq24190_sysfs_field_info *info;
> + ssize_t count;
> int ret;
> u8 v;
>
> @@ -427,11 +428,20 @@ static ssize_t bq24190_sysfs_show(struct device *dev,
> if (!info)
> return -EINVAL;
>
> + ret = pm_runtime_get_sync(bdi->dev);
> + if (ret < 0)
> + return ret;
Let's not stop here if get_sync fails.
> ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
> if (ret)
> - return ret;
> + count = ret;
> + else
> + count = scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
>
> - return scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
> + pm_runtime_mark_last_busy(bdi->dev);
> + pm_runtime_put_autosuspend(bdi->dev);
> +
> + return count;
> }
>
> static ssize_t bq24190_sysfs_store(struct device *dev,
> @@ -451,9 +461,16 @@ static ssize_t bq24190_sysfs_store(struct device *dev,
> if (ret < 0)
> return ret;
>
> + ret = pm_runtime_get_sync(bdi->dev);
> + if (ret < 0)
> + return ret;
Nor here 2.
> ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
> if (ret)
> - return ret;
> + count = ret;
> +
> + pm_runtime_mark_last_busy(bdi->dev);
> + pm_runtime_put_autosuspend(bdi->dev);
>
> return count;
> }
> @@ -795,7 +812,9 @@ static int bq24190_charger_get_property(struct power_supply *psy,
>
> dev_dbg(bdi->dev, "prop: %d\n", psp);
>
> - pm_runtime_get_sync(bdi->dev);
> + ret = pm_runtime_get_sync(bdi->dev);
> + if (ret < 0)
> + return ret;
Nor here 3.
> switch (psp) {
> case POWER_SUPPLY_PROP_CHARGE_TYPE:
> @@ -835,7 +854,9 @@ static int bq24190_charger_get_property(struct power_supply *psy,
> ret = -ENODATA;
> }
>
> - pm_runtime_put_sync(bdi->dev);
> + pm_runtime_mark_last_busy(bdi->dev);
> + pm_runtime_put_autosuspend(bdi->dev);
> +
> return ret;
> }
>
> @@ -848,7 +869,9 @@ static int bq24190_charger_set_property(struct power_supply *psy,
>
> dev_dbg(bdi->dev, "prop: %d\n", psp);
>
> - pm_runtime_get_sync(bdi->dev);
> + ret = pm_runtime_get_sync(bdi->dev);
> + if (ret < 0)
> + return ret;
Nor here 4.
> switch (psp) {
> case POWER_SUPPLY_PROP_CHARGE_TYPE:
> @@ -864,7 +887,9 @@ static int bq24190_charger_set_property(struct power_supply *psy,
> ret = -EINVAL;
> }
>
> - pm_runtime_put_sync(bdi->dev);
> + pm_runtime_mark_last_busy(bdi->dev);
> + pm_runtime_put_autosuspend(bdi->dev);
> +
> return ret;
> }
>
> @@ -1065,7 +1090,9 @@ static int bq24190_battery_get_property(struct power_supply *psy,
>
> dev_dbg(bdi->dev, "prop: %d\n", psp);
>
> - pm_runtime_get_sync(bdi->dev);
> + ret = pm_runtime_get_sync(bdi->dev);
> + if (ret < 0)
> + return ret;
Nor here 5.
> switch (psp) {
> case POWER_SUPPLY_PROP_STATUS:
> @@ -1093,7 +1120,9 @@ static int bq24190_battery_get_property(struct power_supply *psy,
> ret = -ENODATA;
> }
>
> - pm_runtime_put_sync(bdi->dev);
> + pm_runtime_mark_last_busy(bdi->dev);
> + pm_runtime_put_autosuspend(bdi->dev);
> +
> return ret;
> }
>
> @@ -1106,7 +1135,9 @@ static int bq24190_battery_set_property(struct power_supply *psy,
>
> dev_dbg(bdi->dev, "prop: %d\n", psp);
>
> - pm_runtime_get_sync(bdi->dev);
> + ret = pm_runtime_get_sync(bdi->dev);
> + if (ret < 0)
> + return ret;
Nor here 6.
> switch (psp) {
> case POWER_SUPPLY_PROP_ONLINE:
> @@ -1119,7 +1150,9 @@ static int bq24190_battery_set_property(struct power_supply *psy,
> ret = -EINVAL;
> }
>
> - pm_runtime_put_sync(bdi->dev);
> + pm_runtime_mark_last_busy(bdi->dev);
> + pm_runtime_put_autosuspend(bdi->dev);
> +
> return ret;
> }
>
> @@ -1234,11 +1267,15 @@ static void bq24190_check_status(struct bq24190_dev_info *bdi)
> static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
> {
> struct bq24190_dev_info *bdi = data;
> + int ret;
>
> bdi->irq_event = true;
> - pm_runtime_get_sync(bdi->dev);
> + ret = pm_runtime_get_sync(bdi->dev);
> + if (ret < 0)
> + return ret;
Nor here 7.
> bq24190_check_status(bdi);
> - pm_runtime_put_sync(bdi->dev);
> + pm_runtime_mark_last_busy(bdi->dev);
> + pm_runtime_put_autosuspend(bdi->dev);
> bdi->irq_event = false;
>
> return IRQ_HANDLED;
> @@ -1249,33 +1286,26 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
> u8 v;
> int ret;
>
> - pm_runtime_get_sync(bdi->dev);
> -
> /* First check that the device really is what its supposed to be */
> ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS,
> BQ24190_REG_VPRS_PN_MASK,
> BQ24190_REG_VPRS_PN_SHIFT,
> &v);
> if (ret < 0)
> - goto out;
> + return ret;
>
> - if (v != bdi->model) {
> - ret = -ENODEV;
> - goto out;
> - }
> + if (v != bdi->model)
> + return -ENODEV;
>
> ret = bq24190_register_reset(bdi);
> if (ret < 0)
> - goto out;
> + return ret;
>
> ret = bq24190_set_mode_host(bdi);
> if (ret < 0)
> - goto out;
> + return ret;
>
> - ret = bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
> -out:
> - pm_runtime_put_sync(bdi->dev);
> - return ret;
> + return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
> }
>
> #ifdef CONFIG_OF
> @@ -1364,12 +1394,16 @@ static int bq24190_probe(struct i2c_client *client,
> }
>
> pm_runtime_enable(dev);
> - pm_runtime_resume(dev);
> + pm_runtime_use_autosuspend(dev);
> + pm_runtime_set_autosuspend_delay(dev, 600);
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0)
> + goto out1;
Nor here 8.
> ret = bq24190_hw_init(bdi);
> if (ret < 0) {
> dev_err(dev, "Hardware init failed\n");
> - goto out1;
> + goto out2;
> }
>
> charger_cfg.drv_data = bdi;
> @@ -1380,7 +1414,7 @@ static int bq24190_probe(struct i2c_client *client,
> if (IS_ERR(bdi->charger)) {
> dev_err(dev, "Can't register charger\n");
> ret = PTR_ERR(bdi->charger);
> - goto out1;
> + goto out2;
> }
>
> battery_cfg.drv_data = bdi;
> @@ -1389,13 +1423,13 @@ static int bq24190_probe(struct i2c_client *client,
> if (IS_ERR(bdi->battery)) {
> dev_err(dev, "Can't register battery\n");
> ret = PTR_ERR(bdi->battery);
> - goto out2;
> + goto out3;
> }
>
> ret = bq24190_sysfs_create_group(bdi);
> if (ret) {
> dev_err(dev, "Can't create sysfs entries\n");
> - goto out3;
> + goto out4;
> }
>
> bdi->initialized = true;
> @@ -1406,21 +1440,30 @@ static int bq24190_probe(struct i2c_client *client,
> "bq24190-charger", bdi);
> if (ret < 0) {
> dev_err(dev, "Can't set up irq handler\n");
> - goto out4;
> + goto out5;
> }
>
> + enable_irq_wake(bdi->irq);
> +
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_autosuspend(dev);
> +
> return 0;
>
> -out4:
> +out5:
> bq24190_sysfs_remove_group(bdi);
>
> -out3:
> +out4:
> power_supply_unregister(bdi->battery);
>
> -out2:
> +out3:
> power_supply_unregister(bdi->charger);
>
> +out2:
> + pm_runtime_put_sync(dev);
> +
> out1:
> + pm_runtime_dont_use_autosuspend(dev);
> pm_runtime_disable(dev);
> if (bdi->gpio_int)
> gpio_free(bdi->gpio_int);
> @@ -1430,14 +1473,20 @@ static int bq24190_probe(struct i2c_client *client,
> static int bq24190_remove(struct i2c_client *client)
> {
> struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
> + int error;
>
> - pm_runtime_get_sync(bdi->dev);
> - bq24190_register_reset(bdi);
> - pm_runtime_put_sync(bdi->dev);
> + error = pm_runtime_get_sync(bdi->dev);
> + if (error < 0) {
> + dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
> + pm_runtime_put_noidle(bdi->dev);
> + }
>
> + bq24190_register_reset(bdi);
> bq24190_sysfs_remove_group(bdi);
> power_supply_unregister(bdi->battery);
> power_supply_unregister(bdi->charger);
> + pm_runtime_put_sync(bdi->dev);
> + pm_runtime_dont_use_autosuspend(bdi->dev);
> pm_runtime_disable(bdi->dev);
>
> if (bdi->gpio_int)
> @@ -1480,10 +1529,20 @@ static int bq24190_pm_suspend(struct device *dev)
> {
> struct i2c_client *client = to_i2c_client(dev);
> struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
> + int error;
> +
> + error = pm_runtime_get_sync(bdi->dev);
> + if (error < 0) {
> + dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
> + pm_runtime_put_noidle(bdi->dev);
> + }
>
> - pm_runtime_get_sync(bdi->dev);
> bq24190_register_reset(bdi);
> - pm_runtime_put_sync(bdi->dev);
> +
> + if (!error) {
> + pm_runtime_mark_last_busy(bdi->dev);
> + pm_runtime_put_autosuspend(bdi->dev);
> + }
>
> return 0;
> }
> @@ -1492,15 +1551,25 @@ static int bq24190_pm_resume(struct device *dev)
> {
> struct i2c_client *client = to_i2c_client(dev);
> struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
> + int error;
>
> bdi->f_reg = 0;
> bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
>
> - pm_runtime_get_sync(bdi->dev);
> + error = pm_runtime_get_sync(bdi->dev);
> + if (error < 0) {
> + pm_runtime_put_noidle(bdi->dev);
> + dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
> + }
> +
> bq24190_register_reset(bdi);
> bq24190_set_mode_host(bdi);
> bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
> - pm_runtime_put_sync(bdi->dev);
> +
> + if (!error) {
> + pm_runtime_mark_last_busy(bdi->dev);
> + pm_runtime_put_autosuspend(bdi->dev);
> + }
We need helper funcs...
static inline int bq24190_pmrt_get(struct device* dev) {
int err = pm_runtime_get_sync(dev);
if (err < 0) {
dev_warn(dev, "pm_runtime_get failed: %i\n", err);
pm_runtime_put_noidle(dev);
}
return err;
}
static inline void bq24190_pmrt_put(struct device* dev, int err) {
if (!err) {
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
}
}
Apologies, should have raised this on last version!
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
