Hi, these emails are missing v2 in subject line. On Mon, Jan 30, 2017 at 4:02 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > We can get quite a few interrupts when the battery is trickle charging. > Let's enable PM runtime autosuspend to avoid constantly toggling device > driver PM runtime state. > > Let's use a 600 ms timeout as that's how long the USB chager detection > might take. > > Cc: Liam Breck <kernel@xxxxxxxxxxxxxxxxx> > Acked-by: Mark Greer <mgreer@xxxxxxxxxxxxxxx> > Acked-by: Liam Breck <kernel@xxxxxxxxxxxxxxxxx> > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> > --- > drivers/power/supply/bq24190_charger.c | 153 ++++++++++++++++++++++++--------- > 1 file changed, 111 insertions(+), 42 deletions(-) > > diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c > --- a/drivers/power/supply/bq24190_charger.c > +++ b/drivers/power/supply/bq24190_charger.c > ... > @@ -1364,12 +1394,16 @@ static int bq24190_probe(struct i2c_client *client, > } > > pm_runtime_enable(dev); > - pm_runtime_resume(dev); > + pm_runtime_set_autosuspend_delay(dev, 600); > + pm_runtime_use_autosuspend(dev); > + ret = pm_runtime_get_sync(dev); > + if (ret < 0) > + goto out1; Call get_sync() before set_autosuspend() ? > ret = bq24190_hw_init(bdi); > if (ret < 0) { > dev_err(dev, "Hardware init failed\n"); > - goto out1; > + goto out2; > } > > charger_cfg.drv_data = bdi; > @@ -1380,7 +1414,7 @@ static int bq24190_probe(struct i2c_client *client, > if (IS_ERR(bdi->charger)) { > dev_err(dev, "Can't register charger\n"); > ret = PTR_ERR(bdi->charger); > - goto out1; > + goto out2; > } > > battery_cfg.drv_data = bdi; > @@ -1389,13 +1423,13 @@ static int bq24190_probe(struct i2c_client *client, > if (IS_ERR(bdi->battery)) { > dev_err(dev, "Can't register battery\n"); > ret = PTR_ERR(bdi->battery); > - goto out2; > + goto out3; > } > > ret = bq24190_sysfs_create_group(bdi); > if (ret) { > dev_err(dev, "Can't create sysfs entries\n"); > - goto out3; > + goto out4; > } > > bdi->initialized = true; > @@ -1406,21 +1440,30 @@ static int bq24190_probe(struct i2c_client *client, > "bq24190-charger", bdi); > if (ret < 0) { > dev_err(dev, "Can't set up irq handler\n"); > - goto out4; > + goto out5; > } > > + enable_irq_wake(bdi->irq); > + > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_autosuspend(dev); > + > return 0; > > -out4: > +out5: > bq24190_sysfs_remove_group(bdi); > > -out3: > +out4: > power_supply_unregister(bdi->battery); > > -out2: > +out3: > power_supply_unregister(bdi->charger); > > +out2: > + pm_runtime_put_sync(dev); > + > out1: > + pm_runtime_dont_use_autosuspend(dev); Change order of above two if my prev comment is right. > pm_runtime_disable(dev); > if (bdi->gpio_int) > gpio_free(bdi->gpio_int); > @@ -1430,14 +1473,20 @@ static int bq24190_probe(struct i2c_client *client, > static int bq24190_remove(struct i2c_client *client) > { > struct bq24190_dev_info *bdi = i2c_get_clientdata(client); > + int error; > > - pm_runtime_get_sync(bdi->dev); > - bq24190_register_reset(bdi); > - pm_runtime_put_sync(bdi->dev); > + error = pm_runtime_get_sync(bdi->dev); > + if (error < 0) { > + dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); > + pm_runtime_put_noidle(bdi->dev); > + } > > + bq24190_register_reset(bdi); > bq24190_sysfs_remove_group(bdi); > power_supply_unregister(bdi->battery); > power_supply_unregister(bdi->charger); > + pm_runtime_dont_use_autosuspend(bdi->dev); > + pm_runtime_put_sync(bdi->dev); Alternatively, switch order of above two. > pm_runtime_disable(bdi->dev); > > if (bdi->gpio_int) Apologies if I'm nitpicking! ~.~ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html