This code is no longer used and can be removed as we
are using device tree.
Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
---
Changes:
split patch per Rogers' suggestion
arch/arm/mach-omap2/Makefile | 3 -
arch/arm/mach-omap2/gpmc-nand.c | 154 ----------------------------------------
2 files changed, 157 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 093458b62c8d..c89757abb0ae 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -241,6 +241,3 @@ obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
obj-y += $(onenand-m) $(onenand-y)
-
-nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
-obj-y += $(nand-m) $(nand-y)
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
deleted file mode 100644
index f6ac027f3c3b..000000000000
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * gpmc-nand.c
- *
- * Copyright (C) 2009 Texas Instruments
- * Vimal Singh <vimalsingh@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/omap-gpmc.h>
-#include <linux/mtd/nand.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include <asm/mach/flash.h>
-
-#include "soc.h"
-
-/* minimum size for IO mapping */
-#define NAND_IO_SIZE 4
-
-static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
-{
- /* platforms which support all ECC schemes */
- if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() ||
- soc_is_omap54xx() || soc_is_dra7xx())
- return 1;
-
- if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ||
- ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) {
- if (cpu_is_omap24xx())
- return 0;
- else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0))
- return 0;
- else
- return 1;
- }
-
- /* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
- * which require H/W based ECC error detection */
- if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
- ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
- (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
- return 0;
-
- /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
- if (ecc_opt == OMAP_ECC_HAM1_CODE_HW ||
- ecc_opt == OMAP_ECC_HAM1_CODE_SW)
- return 1;
- else
- return 0;
-}
-
-/* This function will go away once the device-tree convertion is complete */
-static void gpmc_set_legacy(struct omap_nand_platform_data *gpmc_nand_data,
- struct gpmc_settings *s)
-{
- /* Enable RD PIN Monitoring Reg */
- if (gpmc_nand_data->dev_ready) {
- s->wait_on_read = true;
- s->wait_on_write = true;
- }
-
- if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
- s->device_width = GPMC_DEVWIDTH_16BIT;
- else
- s->device_width = GPMC_DEVWIDTH_8BIT;
-}
-
-int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
- struct gpmc_timings *gpmc_t)
-{
- int err = 0;
- struct gpmc_settings s;
- struct platform_device *pdev;
- struct resource gpmc_nand_res[] = {
- { .flags = IORESOURCE_MEM, },
- { .flags = IORESOURCE_IRQ, },
- { .flags = IORESOURCE_IRQ, },
- };
-
- BUG_ON(gpmc_nand_data->cs >= GPMC_CS_NUM);
-
- err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
- (unsigned long *)&gpmc_nand_res[0].start);
- if (err < 0) {
- pr_err("omap2-gpmc: Cannot request GPMC CS %d, error %d\n",
- gpmc_nand_data->cs, err);
- return err;
- }
- gpmc_nand_res[0].end = gpmc_nand_res[0].start + NAND_IO_SIZE - 1;
- gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
- gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
-
- memset(&s, 0, sizeof(struct gpmc_settings));
- gpmc_set_legacy(gpmc_nand_data, &s);
-
- s.device_nand = true;
-
- if (gpmc_t) {
- err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s);
- if (err < 0) {
- pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n",
- err);
- return err;
- }
- }
-
- err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
- if (err < 0)
- goto out_free_cs;
-
- err = gpmc_configure(GPMC_CONFIG_WP, 0);
- if (err < 0)
- goto out_free_cs;
-
- if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
- pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
- err = -EINVAL;
- goto out_free_cs;
- }
-
-
- pdev = platform_device_alloc("omap2-nand", gpmc_nand_data->cs);
- if (pdev) {
- err = platform_device_add_resources(pdev, gpmc_nand_res,
- ARRAY_SIZE(gpmc_nand_res));
- if (!err)
- pdev->dev.platform_data = gpmc_nand_data;
- } else {
- err = -ENOMEM;
- }
- if (err)
- goto out_free_pdev;
-
- err = platform_device_add(pdev);
- if (err) {
- dev_err(&pdev->dev, "Unable to register NAND device\n");
- goto out_free_pdev;
- }
-
- return 0;
-
-out_free_pdev:
- platform_device_put(pdev);
-out_free_cs:
- gpmc_cs_free(gpmc_nand_data->cs);
-
- return err;
-}
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
