Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 20 February 2017 23:21:37 Petr Cvek wrote:
> Hi,
> 
> Dne 20.2.2017 v 22:50 Dmitry Torokhov napsal(a):
> > On Mon, Feb 20, 2017 at 1:27 PM, H. Nikolaus Schaller
> > <hns@xxxxxxxxxxxxx> wrote:
> >>> Am 20.02.2017 um 22:08 schrieb Pali Rohár <pali.rohar@xxxxxxxxx>:
> >>> 
> >>> On Monday 20 February 2017 20:42:15 Pali Rohár wrote:
> >>>> Hi Nikolaus!
> >>>> 
> >>>> On Monday 20 February 2017 17:50:04 H. Nikolaus Schaller wrote:
> >>>>> Hi Dmitry,
> >>>>> 
> >>>>>> Input driver may set resolution for given axis in units per mm
> >>>>>> (or units per radian for rotational axis ABS_RX, ABS_RY,
> >>>>>> ABS_RZ), and if you check the binding, you can use
> >>>>>> "touchscreen-x-mm" and "touchscreen-y-mm" to specify the size
> >>>>>> of entire touch surface and set resolution from it so that
> >>>>>> userspace can calculate the proper scaling factor.
> >>>>> 
> >>>>> How is this information exposed by the kernel to user-space? By
> >>>>> scanning the DT file or tree?
> >>>> 
> >>>> Set input_abs_set_res() from kernel. And in userspace call
> >>>> EVIOCGABS ioctl() on input device. Look at struct
> >>>> input_absinfo, you should have all needed information here.
> >>>> This is generic input interface, no DT is needed.
> >>> 
> >>> Looking at kernel code... via EVIOCSABS ioctl() you can even set
> >>> resolution from userspace for specified input device.
> >>> 
> >>> So this could be potentially used for calibrating input device
> >>> from userspace? (In case DT data will not fully match current
> >>> HW)
> >>> 
> >>>> I hope that XServer is already using it for evdev devices...
> >>>> 
> >>>> For whole implementation look at evtest program. That should be
> >>>> good starting point for your userspace implementation.
> >>>> 
> >>>> While I'm watching this discussion... in my opinion kernel
> >>>> should just invert input axes (when needed)
> >> 
> >> It is questionable why it should do that at all then.
> > 
> > Because the task of the kernel is to provide unified view of the
> > hardware. Axis swapping and inversion is needed to that "up" is
> > always "up" and "right" is always "right".
> 
> Actually my Xorg calibration 3x3 matrix is fine with both axis
> inverted (on TSC2046).

Yes, 3x3 matrix which represent affine transformation can code inverted 
axis. This is IIRC what Xorg is doing.

But with information of min, max and current values plus resolution you 
cannot code information that axes are inverted (unless you misuse fact 
what is minimal and what maximal value). And this is what kernel 
provides for input device.

Affine transformation supported by Xorg is "stronger" as resolution 
provided by kernel.

-- 
Pali Rohár
pali.rohar@xxxxxxxxx

Attachment: signature.asc
Description: This is a digitally signed message part.


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux