Hi,
On 02/03/2017 09:24 AM, Lukasz Majewski wrote:
The "operating-points" property have been replaced with
"operating-points-v2". Only entries with the same frequencies have
been added, so no reqression should be introduced.
Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
arch/arm/boot/dts/dra7.dtsi | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 3c228f9..a860a56 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -80,11 +80,7 @@
compatible = "arm,cortex-a15";
reg = <0>;
- operating-points = <
- /* kHz uV */
- 1000000 1060000
- 1176000 1160000
- >;
+ operating-points-v2 = <&cpu0_opp_table>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
@@ -98,6 +94,22 @@
};
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp_nom@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1060000 850000 1150000>;
+ opp-suspend;
+ };
+
+ opp_od@1176000000 {
+ opp-hz = /bits/ 64 <1176000000>;
+ opp-microvolt = <1160000 885000 1160000>;
+ };
+ };
+
This is being done here already [1] as these OPPs have specific requirements
depending on the SoC in use. I have sent proper operating-points-v2 tables here
[2] already, they won't be ready to merge until after the driver at [1] is merged.
Regards,
Dave
[1] http://www.spinics.net/lists/devicetree/msg158967.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-May/430209.html
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
