Re: dwc3 gadget breaks on system suspend/resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Roger Quadros <rogerq@xxxxxx> writes:
>> (hmm, I didn't receive your reply in my intel inbox, only
>> gmail. Odd. Replying to myself here, but it should be on your reply,
>> rater).
>> 
>> Felipe Balbi <balbi@xxxxxxxxxx> writes:
>>>> The previous commit c499ff71ff2a281366c6ec7a904c547d806cbcd1 is fine.
>>>
>>> okay. Then let's try to figure out what's going on. A diff of regdump
>>> before and after suspend/resume might start to give some clue about
>>> what's going on. DWC3 tracepoints should help too. Care to get those?
>>> BTW, is this dwc3 as host or peripheral?
>> 
>> You don't have any endpoints enabled:
>> 
>> -DALEPENA = 0x0000000f
>> +DALEPENA = 0x00000000
>
> Thanks for the hints.
>
> This problem is because reason dwc3_gadget_run_stop() is timing out
> during the suspend sequence and so dwc3_disconnect_gadget() and
> __dwc3_gadget_stop() are not being called.

I see

> dwc3_suspend() does not consider dwc3_gadget_suspend()'s return value
> and happily continues suspending the machine.
>
> If I force dwc3_gadget_run_stop() to return 0 then everything works fine.
>
> Any ideas why DWC3_DSTS_DEVCTRLHLT is not getting set?

no idea. It should always get set when run_stop is cleared. Can you
check if suspending with cable detached has any difference?

-- 
balbi

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux