On Mon, 6 Mar 2017 09:23:41 -0600
Dave Gerlach <d-gerlach@xxxxxx> wrote:
> After the ti-cpufreq driver has been added, we can now drop the
> operating-points table present in dra7.dtsi for the cpu and add an
> operating-points-v2 table with all OPPs available for all silicon
> revisions. Also add necessary data for use by ti-cpufreq to
> selectively enable the appropriate OPPs at runtime as part of the
> operating-points table.
>
> As we now need to define voltage ranges for each OPP, we define the
> minimum and maximum voltage to match the ranges possible for AVS
> class0 voltage as defined by the DRA7/AM57 Data Manual, with the
> exception of using a range for OPP_OD based on historical data to
> ensure that SoCs from older lots still continue to boot, even though
> more optimal voltages are now the standard. Once an AVS Class0 driver
> is in place it will be possible for these OPP voltages to be adjusted
> to any voltage within the provided range.
>
> Information from SPRS953, Revised December 2015.
>
> Signed-off-by: Dave Gerlach <d-gerlach@xxxxxx>
Reviewed-by: Lukasz Majewski <lukma@xxxxxxx>
> ---
> arch/arm/boot/dts/dra7.dtsi | 24 +++++++++++++++++++-----
> arch/arm/boot/dts/dra74x.dtsi | 5 +++++
> 2 files changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 2c9e56f4aac5..e9dc314b0dcf 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -81,11 +81,7 @@
> compatible = "arm,cortex-a15";
> reg = <0>;
>
> - operating-points = <
> - /* kHz uV */
> - 1000000 1060000
> - 1176000 1160000
> - >;
> + operating-points-v2 = <&cpu0_opp_table>;
>
> clocks = <&dpll_mpu_ck>;
> clock-names = "cpu";
> @@ -99,6 +95,24 @@
> };
> };
>
> + cpu0_opp_table: opp-table {
> + compatible = "operating-points-v2-ti-cpu";
> + syscon = <&scm_wkup>;
> +
> + opp_nom@1000000000 {
> + opp-hz = /bits/ 64 <1000000000>;
> + opp-microvolt = <1060000 850000 1150000>;
> + opp-supported-hw = <0xFF 0x01>;
> + opp-suspend;
> + };
> +
> + opp_od@1176000000 {
> + opp-hz = /bits/ 64 <1176000000>;
> + opp-microvolt = <1160000 885000 1160000>;
> + opp-supported-hw = <0xFF 0x02>;
> + };
> + };
> +
> /*
> * The soc node represents the soc top level view. It is
> used for IPs
> * that are not memory mapped in the MPU view or for the MPU
> itself. diff --git a/arch/arm/boot/dts/dra74x.dtsi
> b/arch/arm/boot/dts/dra74x.dtsi index 0a78347e6615..24e6746c5b26
> 100644 --- a/arch/arm/boot/dts/dra74x.dtsi
> +++ b/arch/arm/boot/dts/dra74x.dtsi
> @@ -17,6 +17,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <1>;
> + operating-points-v2 = <&cpu0_opp_table>;
> };
> };
>
> @@ -79,6 +80,10 @@
> };
> };
>
> +&cpu0_opp_table {
> + opp-shared;
> +};
> +
> &dss {
> reg = <0x58000000 0x80>,
> <0x58004054 0x4>,
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@xxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
