Wednesday, February 15, 2017 8:18 AM, Kishon Vijay Abraham I wrote: > > No functional change. Move the register defines and other macros from > pcie-designware.c to pcie-designware.h. This is in preparation to > split the pcie-designware.c file into designware core file and host > specific file. > > While at that also fix a checkpatch warning. > > Reviewed-By: Joao Pinto <jpinto@xxxxxxxxxxxx> > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Acked-by: Jingoo Han <jingoohan1@xxxxxxxxx> Best regards, Jingoo Han > --- > drivers/pci/dwc/pcie-designware.c | 70 -------------------------------- > ---- > drivers/pci/dwc/pcie-designware.h | 71 > +++++++++++++++++++++++++++++++++++++ > 2 files changed, 71 insertions(+), 70 deletions(-) > > diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie- > designware.c > index af8f6e9..d0e4904 100644 > --- a/drivers/pci/dwc/pcie-designware.c > +++ b/drivers/pci/dwc/pcie-designware.c > @@ -25,76 +25,6 @@ > > #include "pcie-designware.h" > > -/* Parameters for the waiting for link up routine */ > -#define LINK_WAIT_MAX_RETRIES 10 > -#define LINK_WAIT_USLEEP_MIN 90000 > -#define LINK_WAIT_USLEEP_MAX 100000 > - > -/* Parameters for the waiting for iATU enabled routine */ > -#define LINK_WAIT_MAX_IATU_RETRIES 5 > -#define LINK_WAIT_IATU_MIN 9000 > -#define LINK_WAIT_IATU_MAX 10000 > - > -/* Synopsys-specific PCIe configuration registers */ > -#define PCIE_PORT_LINK_CONTROL 0x710 > -#define PORT_LINK_MODE_MASK (0x3f << 16) > -#define PORT_LINK_MODE_1_LANES (0x1 << 16) > -#define PORT_LINK_MODE_2_LANES (0x3 << 16) > -#define PORT_LINK_MODE_4_LANES (0x7 << 16) > -#define PORT_LINK_MODE_8_LANES (0xf << 16) > - > -#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C > -#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17) > -#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8) > -#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8) > -#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8) > -#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8) > -#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8) > - > -#define PCIE_MSI_ADDR_LO 0x820 > -#define PCIE_MSI_ADDR_HI 0x824 > -#define PCIE_MSI_INTR0_ENABLE 0x828 > -#define PCIE_MSI_INTR0_MASK 0x82C > -#define PCIE_MSI_INTR0_STATUS 0x830 > - > -#define PCIE_ATU_VIEWPORT 0x900 > -#define PCIE_ATU_REGION_INBOUND (0x1 << 31) > -#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) > -#define PCIE_ATU_REGION_INDEX2 (0x2 << 0) > -#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) > -#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) > -#define PCIE_ATU_CR1 0x904 > -#define PCIE_ATU_TYPE_MEM (0x0 << 0) > -#define PCIE_ATU_TYPE_IO (0x2 << 0) > -#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) > -#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) > -#define PCIE_ATU_CR2 0x908 > -#define PCIE_ATU_ENABLE (0x1 << 31) > -#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) > -#define PCIE_ATU_LOWER_BASE 0x90C > -#define PCIE_ATU_UPPER_BASE 0x910 > -#define PCIE_ATU_LIMIT 0x914 > -#define PCIE_ATU_LOWER_TARGET 0x918 > -#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) > -#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) > -#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) > -#define PCIE_ATU_UPPER_TARGET 0x91C > - > -/* > - * iATU Unroll-specific register definitions > - * From 4.80 core version the address translation will be made by unroll > - */ > -#define PCIE_ATU_UNR_REGION_CTRL1 0x00 > -#define PCIE_ATU_UNR_REGION_CTRL2 0x04 > -#define PCIE_ATU_UNR_LOWER_BASE 0x08 > -#define PCIE_ATU_UNR_UPPER_BASE 0x0C > -#define PCIE_ATU_UNR_LIMIT 0x10 > -#define PCIE_ATU_UNR_LOWER_TARGET 0x14 > -#define PCIE_ATU_UNR_UPPER_TARGET 0x18 > - > -/* Register address builder */ > -#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((0x3 << 20) | (region > << 9)) > - > /* PCIe Port Logic registers */ > #define PLR_OFFSET 0x700 > #define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c) > diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie- > designware.h > index a567ea2..b5226d4 100644 > --- a/drivers/pci/dwc/pcie-designware.h > +++ b/drivers/pci/dwc/pcie-designware.h > @@ -14,6 +14,77 @@ > #ifndef _PCIE_DESIGNWARE_H > #define _PCIE_DESIGNWARE_H > > +/* Parameters for the waiting for link up routine */ > +#define LINK_WAIT_MAX_RETRIES 10 > +#define LINK_WAIT_USLEEP_MIN 90000 > +#define LINK_WAIT_USLEEP_MAX 100000 > + > +/* Parameters for the waiting for iATU enabled routine */ > +#define LINK_WAIT_MAX_IATU_RETRIES 5 > +#define LINK_WAIT_IATU_MIN 9000 > +#define LINK_WAIT_IATU_MAX 10000 > + > +/* Synopsys-specific PCIe configuration registers */ > +#define PCIE_PORT_LINK_CONTROL 0x710 > +#define PORT_LINK_MODE_MASK (0x3f << 16) > +#define PORT_LINK_MODE_1_LANES (0x1 << 16) > +#define PORT_LINK_MODE_2_LANES (0x3 << 16) > +#define PORT_LINK_MODE_4_LANES (0x7 << 16) > +#define PORT_LINK_MODE_8_LANES (0xf << 16) > + > +#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C > +#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17) > +#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8) > +#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8) > +#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8) > +#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8) > +#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8) > + > +#define PCIE_MSI_ADDR_LO 0x820 > +#define PCIE_MSI_ADDR_HI 0x824 > +#define PCIE_MSI_INTR0_ENABLE 0x828 > +#define PCIE_MSI_INTR0_MASK 0x82C > +#define PCIE_MSI_INTR0_STATUS 0x830 > + > +#define PCIE_ATU_VIEWPORT 0x900 > +#define PCIE_ATU_REGION_INBOUND (0x1 << 31) > +#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) > +#define PCIE_ATU_REGION_INDEX2 (0x2 << 0) > +#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) > +#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) > +#define PCIE_ATU_CR1 0x904 > +#define PCIE_ATU_TYPE_MEM (0x0 << 0) > +#define PCIE_ATU_TYPE_IO (0x2 << 0) > +#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) > +#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) > +#define PCIE_ATU_CR2 0x908 > +#define PCIE_ATU_ENABLE (0x1 << 31) > +#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) > +#define PCIE_ATU_LOWER_BASE 0x90C > +#define PCIE_ATU_UPPER_BASE 0x910 > +#define PCIE_ATU_LIMIT 0x914 > +#define PCIE_ATU_LOWER_TARGET 0x918 > +#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) > +#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) > +#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) > +#define PCIE_ATU_UPPER_TARGET 0x91C > + > +/* > + * iATU Unroll-specific register definitions > + * From 4.80 core version the address translation will be made by unroll > + */ > +#define PCIE_ATU_UNR_REGION_CTRL1 0x00 > +#define PCIE_ATU_UNR_REGION_CTRL2 0x04 > +#define PCIE_ATU_UNR_LOWER_BASE 0x08 > +#define PCIE_ATU_UNR_UPPER_BASE 0x0C > +#define PCIE_ATU_UNR_LIMIT 0x10 > +#define PCIE_ATU_UNR_LOWER_TARGET 0x14 > +#define PCIE_ATU_UNR_UPPER_TARGET 0x18 > + > +/* Register address builder */ > +#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \ > + ((0x3 << 20) | ((region) << 9)) > + > /* > * Maximum number of MSI IRQs can be 256 per controller. But keep > * it 32 as of now. Probably we will never need more than 32. If needed, > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
