Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCHv2] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v5 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] mfd: cpcap: Use handle_reread flag for interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] mfd: cpcap: Use ack_invert interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] mfd: cpcap: Fix bad use of IRQ sense register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/4] Regmap IRQ fix and related changes CPCAP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: am437x-gp-evm: Add pinmux for uart0
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v4 14/23] PCI: dwc: dra7xx: Workaround for errata id i870
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v4 15/23] dt-bindings: PCI: dra7xx: Add dt bindings to enable unaligned access
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 0/4] Regmap IRQ fix and related changes CPCAP
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configuration
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configuration
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH 03/15] ARM: dts: ti: fix PCI bus dtc warnings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N900 failure in next-20170321
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• N900 failure in next-20170321
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv2 00/10] Nokia N950 basic display support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv2 00/10] Nokia N950 basic display support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 09/10] drm: omapdrm: crtc: get manual mode displays working
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv2 03/10] Revert "drm: omapdrm: Remove manual update display support"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH v4 14/23] PCI: dwc: dra7xx: Workaround for errata id i870
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 15/23] dt-bindings: PCI: dra7xx: Add dt bindings to enable unaligned access
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCHv2 03/10] Revert "drm: omapdrm: Remove manual update display support"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] omapfb: dss: Handle return error in dss_init_ports.
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCHv2 03/10] Revert "drm: omapdrm: Remove manual update display support"
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv2 03/10] Revert "drm: omapdrm: Remove manual update display support"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 8/9] ARM: dts: omap4: add clkctrl nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 5/9] ARM: OMAP2+: hwmod: assign main clock from DT if available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 8/9] ARM: dts: omap4: add clkctrl nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 5/9] ARM: OMAP2+: hwmod: assign main clock from DT if available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 8/9] ARM: dts: omap4: add clkctrl nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 8/9] ARM: dts: omap4: add clkctrl nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v4 1/3] phy: qcom-usb: Remove unused ulpi phy header
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] phy: Group phy drivers based on vendor listing
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• Re: [PATCHv2 5/9] ARM: OMAP2+: hwmod: assign main clock from DT if available
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v4 3/3] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• [PATCH v4 2/3] phy: Move ULPI phy header out of drivers to include path
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• Re: [PATCHv2 00/10] Nokia N950 basic display support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] mfd: cpcap: Fix bad use of IRQ sense register
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ASoC: omap: constify snd_soc_ops structures
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH 2/6] ARM: dts: omap4-droid4: Add LCD backlight
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: [PATCH] ASoC: omap: constify snd_soc_ops structures
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] mfd: cpcap: Fix bad use of IRQ sense register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCHv2 8/9] ARM: dts: omap4: add clkctrl nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 4/4] mfd: cpcap: Fix bad use of IRQ sense register
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: omap4-droid4: Add tmp105 sensor for droid 4
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 3/6] ARM: dts: omap4-droid4: Add GPIO poweroff
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/6] ARM: dts: omap4-droid4: Add LCD backlight
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] ASoC: omap: constify snd_soc_ops structures
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 2/2] gpio: omap: compute debounce-time from actual debounce-clock rate
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] gpio: omap: compute debounce-time from actual debounce-clock rate
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: [PATCHv2 5/9] ARM: OMAP2+: hwmod: assign main clock from DT if available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] gpio: omap: compute debounce-time from actual debounce-clock rate
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCHv2 5/9] ARM: OMAP2+: hwmod: assign main clock from DT if available
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCHv2 8/9] ARM: dts: omap4: add clkctrl nodes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 5/9] ARM: OMAP2+: hwmod: assign main clock from DT if available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 6/9] ARM: OMAP2+: timer: add support for fetching fck handle from DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 01/10] drm: omapdrm: panel-dsi-cm: Fix probe for device tree
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv2 08/10] drm: omapdrm: crtc: handle framedone directly
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv2 02/10] drm: omapdrm: panel-dsi-cm: add regulator support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 1/9] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 1/9] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] clk: ti: cleanups for 4.12 merge window
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCHv2 9/9] ARM: dts: omap4: convert to use the new clkctrl clocks for the drivers
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 8/9] ARM: dts: omap4: add clkctrl nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 7/9] ARM: dts: omap4: add bus functionality to base PRCM nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• [PATCHv2 6/9] ARM: OMAP2+: timer: add support for fetching fck handle from DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 5/9] ARM: OMAP2+: hwmod: assign main clock from DT if available
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 2/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 4/9] clk: ti: omap4: add clkctrl clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 3/9] dt-bindings: clk: add omap4 clkctrl definitions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 1/9] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v2 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 2/3] ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] Configure CPCAP PMIC ADC, charger and OTG for droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] gpio: omap: compute debounce-time from actual debounce-clock rate
  • From: David Rivshin <drivshin@xxxxxxxxx>
• [PATCH 0/2] gpio: omap: set_debounce fixes
  • From: David Rivshin <drivshin@xxxxxxxxx>
• [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: David Rivshin <drivshin@xxxxxxxxx>
• [PATCH] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] mfd: cpcap: Use ack_invert interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] mfd: cpcap: Fix bad use of IRQ sense register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] mfd: cpcap: Use handle_reread flag for interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/4] Regmap IRQ fix and related changes CPCAP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: dts: omap4-droid4: Add HDMI support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 07/17] thermal: cpu_cooling: use cpufreq_policy to register cooling device
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCHv4 0/2] Two bq24190 PM improvments
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 1/2] doc: dt: mtd: add w25q64 to list of supported SPI flashes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Moreno Bartalucci <moreno.bartalucci@xxxxxxxxxxxx>
• Re: [PATCH 23/35] drivers/mfd: Convert remaining uses of pr_warning to pr_warn
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 23/35] drivers/mfd: Convert remaining uses of pr_warning to pr_warn
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH] ARM: omap2: mark omap_init_rng as __init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RESEND PATCH] ARM: omap2: mark omap_init_rng as __init
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] dt-bindings: bus: TI interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] ARM: OMAP2+: Make hwmod clkdm_name const
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] ARM: OMAP2+: Remove unnecessary hwmod clockact
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] ARM: OMAP2+: Use list_for_each_entry for hwmod slave_ports
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] ARM: OMAP2+: Remove mostly unused hwmod linkspace
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/4] Clean up omap hwmod code for dynamic allocation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 23/35] drivers/mfd: Convert remaining uses of pr_warning to pr_warn
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/12] gpio: use resource management for irq descriptors
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 09/12] gpio: sodaville: use resource management for irqs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 10/12] gpio: mxc: use devm_irq_alloc_descs()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 11/12] gpio: mxs: use devm_irq_alloc_descs()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 12/12] gpio: sta2x11: use resource management for irqs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/12] gpio: use resource management for irq descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 08/12] gpio: davinci: use devm_irq_alloc_descs()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 06/12] gpio: xlp: use resource management for irqs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 07/12] gpio: pxa: use devm_irq_alloc_descs()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 05/12] gpio: ml-ioh: use resource management for irqs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 04/12] gpio: pch: use resource management for irqs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: dm8168-evm: add the external reference clock for SATA
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/12] gpio: omap: use devm_irq_alloc_descs()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 02/12] gpio: twl4030: use devm_irq_alloc_descs()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 01/12] gpio: mockup: use devm_irq_alloc_descs()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: dm8168-evm: add the external reference clock for SATA
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 23/35] drivers/mfd: Convert remaining uses of pr_warning to pr_warn
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 3/3] ARM: omap2plus_defconfig: Enable TI Ethernet PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 2/2] ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 1/4] ARM: OMAP2+: omap_hwmod: provide space for more hwmod flags
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 1/4] ARM: OMAP2+: dm81xx: Add clkdm and hwmod for SATA
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 3/4] ARM: dts: dm8168-evm: add SATA node
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: omap2plus_defconfig: enable ahci-dm816 module
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: dm8168-evm: add the external reference clock for SATA
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 0/4] ARM: dm8168-evm: add SATA support
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: omap_hwmod: provide space for more hwmod flags
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/4] ARM: dts: dm8168-evm: add SATA node
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tero Kristo <t-kristo@xxxxxx>
• RE: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [GIT PULL] omap fixes v4.11-rc cycle
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: dm81xx: Add clkdm and hwmod for SATA
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: dm8168-evm: add the external reference clock for SATA
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 3/4] ARM: dts: dm8168-evm: add SATA node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 0/4] ARM: dm8168-evm: add SATA support
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: dm8168-evm: add SATA node
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 1/4] ARM: OMAP2+: dm81xx: Add clkdm and hwmod for SATA
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 4/4] ARM: omap2plus_defconfig: enable ahci-dm816 module
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 2/4] ARM: dts: dm8168-evm: add the external reference clock for SATA
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v4 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• [PATCH v4 04/23] Documentation: PCI: Guide to use pci endpoint configfs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 10/23] dt-bindings: PCI: Add dt bindings for pci designware EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v4 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• [PATCH v4 05/23] PCI: endpoint: Create configfs entry for EPC device and EPF driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 03/23] PCI: endpoint: Introduce configfs entry for configuring EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 06/23] Documentation: PCI: Add specification for the *pci test* function device
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 07/23] PCI: endpoint: functions: Add an EP function to test PCI
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 01/23] PCI: endpoint: Add EP core layer to enable EP controller and EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [GIT PULL 00/23] PCI: Support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 08/23] Documentation: PCI: Add binding documentation for pci-test endpoint function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 11/23] PCI: dwc: dra7xx: Facilitate wrapper and msi interrupts to be enabled independently
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 19/23] tools: PCI: Add a userspace tool to test PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 13/23] dt-bindings: PCI: dra7xx: Add dt bindings for pci dra7xx EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 22/23] MAINTAINERS: add PCI EP maintainer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 14/23] PCI: dwc: dra7xx: Workaround for errata id i870
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 17/23] misc: Add host side pci driver for pci test function device
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 12/23] PCI: dwc: dra7xx: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 21/23] Documentation: PCI: Add userguide for PCI endpoint test function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 23/23] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 16/23] PCI: Add device IDs for DRA74x and DRA72x
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 15/23] dt-bindings: PCI: dra7xx: Add dt bindings to enable unaligned access
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 20/23] tools: PCI: Add sample test script to invoke pcitest
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 18/23] Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 02/23] Documentation: PCI: Guide to use PCI Endpoint Core Layer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 09/23] PCI: dwc: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 0/7] PCI: dwc: Miscellaneous fixes and cleanups
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 3/7] PCI: dwc: artpec6: Populate cpu_addr_fixup ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 2/7] PCI: dwc: dra7xx: Populate cpu_addr_fixup ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 7/7] PCI: dwc: dra7xx: Push request_irq call to the bottom of probe
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 1/7] PCI: dwc: designware: Add new *ops* for cpu addr fixup
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 6/7] PCI: dwc: designware: Move _unroll configurations to a separate function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/2] ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/2] net: davinci_mdio: add GPIO reset logic
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/2] ARM: am335x-icev2: Add ethernet support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: omap_hwmod: provide space for more hwmod flags
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 0/4] ARM: DRA7: Fix DCAN1 stuck-in-transition
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/4] ARM: DRA7: hwmod: Fix DCAN1 stuck in transition
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 4/4] ARM: DRA7: hwmod_data: Prevent wait_target_disable error for usb_otg_ss
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/4] ARM: OMAP2+: omap_hwmod: provide space for more hwmod flags
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/4] ARM: DRA7: Fix DCAN1 stuck-in-transition
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY
  • From: yegorslists@xxxxxxxxxxxxxx
• Re: [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 15/15] clk: ti: convert to use proper register definition for all accesses
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 09/15] clk: ti: drop unnecessary MEMMAP_ADDRESSING flag
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 10/15] clk: ti: mux: convert TI mux clock to use its internal data representation
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 05/15] clk: ti: add clkdm_lookup to the exported functions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 14/15] clk: ti: dpll44xx: fix clksel register initialization
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 13/15] clk: ti: gate: export gate_clk_ops locally
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 11/15] clk: ti: divider: convert TI divider clock to use its own data representation
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 12/15] clk: ti: divider: add driver internal API for parsing divider data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 08/15] clk: ti: omap4: cleanup unnecessary clock aliases
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 06/15] clk: ti: move omap2_init_clk_clkdm under TI clock driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 07/15] clk: ti: enforce const types on string arrays
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 04/15] clk: ti: use automatic clock alias generation framework
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 03/15] clk: ti: add API for creating aliases automatically for simple clock types
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 02/15] clk: ti: add support for automatic clock alias generation
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 01/15] clk: ti: remove un-used definitions from public clk_hw_omap struct
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 00/15] clk: ti: cleanups for 4.12 merge window
  • From: Tero Kristo <t-kristo@xxxxxx>
• gpio-omap: Edge interrupts stall
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [RESEND PATCH v3 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [PATCH v3 08/23] Documentation: PCI: Add binding documentation for pci-test endpoint function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RESEND PATCH v3 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RESEND PATCH v3 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [RESEND PATCH v3 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 08/23] Documentation: PCI: Add binding documentation for pci-test endpoint function
  • From: Rami Rosen <roszenrami@xxxxxxxxx>
• Re: [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [RESEND PATCH v3 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [RESEND PATCH v3 6/7] PCI: dwc: designware: Move _unroll configurations to a separate function
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [RESEND PATCH v3 3/7] PCI: dwc: artpec6: Populate cpu_addr_fixup ops
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• [PATCH v3 16/23] PCI: Add device IDs for DRA74x and DRA72x
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/8] ARM: OMAP443x: Thermal: Add slope and offset values
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 5/8] ARM: OMAP4460: Thermal: Add slope and offset values
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 6/8] thermal: ti-soc-thermal: Fetch slope and offset from DT
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 2/8] ARM: DRA7: Thermal: Add slope and offset values
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 7/8] thermal: ti-soc-thermal: Remove redundant constants
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 3/8] ARM: OMAP5: Thermal: Add slope and offset values
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 1/8] arm: dts: omap3: Add cpu_thermal zone
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 8/8] thermal: ti-soc-thermal: Remove redundant code
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v3 08/23] Documentation: PCI: Add binding documentation for pci-test endpoint function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 10/23] dt-bindings: PCI: Add dt bindings for pci designware EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 07/23] PCI: endpoint: functions: Add an EP function to test PCI
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 06/23] Documentation: PCI: Add specification for the *pci test* function device
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 17/23] misc: Add host side pci driver for pci test function device
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 21/23] Documentation: PCI: Add userguide for PCI endpoint test function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 04/23] Documentation: PCI: Guide to use pci endpoint configfs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 18/23] Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 23/23] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 01/23] PCI: endpoint: Add EP core layer to enable EP controller and EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 09/23] PCI: dwc: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 14/23] PCI: dwc: dra7xx: Workaround for errata id i870
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 12/23] PCI: dwc: dra7xx: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 20/23] tools: PCI: Add sample test script to invoke pcitest
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 19/23] tools: PCI: Add a userspace tool to test PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 22/23] MAINTAINERS: add PCI EP maintainer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 13/23] dt-bindings: PCI: dra7xx: Add dt bindings for pci dra7xx EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 11/23] PCI: dwc: dra7xx: Facilitate wrapper and msi interrupts to be enabled independently
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 00/23] PCI: Support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 15/23] dt-bindings: PCI: dra7xx: Add dt bindings to enable unaligned access
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 03/23] PCI: endpoint: Introduce configfs entry for configuring EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 02/23] Documentation: PCI: Guide to use PCI Endpoint Core Layer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 05/23] PCI: endpoint: Create configfs entry for EPC device and EPF driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v3 1/7] PCI: dwc: designware: Add new *ops* for cpu addr fixup
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v3 2/7] PCI: dwc: dra7xx: Populate cpu_addr_fixup ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v3 3/7] PCI: dwc: artpec6: Populate cpu_addr_fixup ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v3 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v3 7/7] PCI: dwc: dra7xx: Push request_irq call to the bottom of probe
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v3 0/7] PCI: dwc: Miscellaneous fixes and cleanups
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RESEND PATCH v3 6/7] PCI: dwc: designware: Move _unroll configurations to a separate function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• [PATCH v3 2/7] PCI: dwc: dra7xx: Populate cpu_addr_fixup ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• [PATCH v3 7/7] PCI: dwc: dra7xx: Push request_irq call to the bottom of probe
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• [PATCH v3 1/7] PCI: dwc: designware: Add new *ops* for cpu addr fixup
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 6/7] PCI: dwc: designware: Move _unroll configurations to a separate function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 3/7] PCI: dwc: artpec6: Populate cpu_addr_fixup ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 01/12] gpio: mockup: use devm_irq_alloc_descs()
  • From: Bamvor Zhang Jian <bamvor.zhangjian@xxxxxxxxxx>
• Re: [PATCH 02/15] clk: ti: add support for automatic clock alias generation
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH DO NOT MERGE 5/6] ARM: dts: omap4: add some sample clkctrl data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/2] ARM: dts: am335x-icev2: Add support for W25Q64 NOR flash
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 1/2] doc: dt: mtd: add w25q64 to list of supported SPI flashes
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 2/2] ARM: dts: am335x-icev2: Add SPI based NOR
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 0/7] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH DO NOT MERGE 5/6] ARM: dts: omap4: add some sample clkctrl data
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/15] clk: ti: add support for automatic clock alias generation
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Applied "ASoC: omap: Remove unnecessary 'out of memory' message" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [PATCH v2 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [PATCH v2 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [PATCH v2 5/7] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 3/7] PCI: dwc: artpec6: Populate cpu_addr_fixup ops
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [PATCH v2 2/7] PCI: dwc: dra7xx: Populate cpu_addr_fixup ops
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [PATCH v2 1/7] PCI: dwc: designware: Add new *ops* for cpu addr fixup
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• [PATCH v2 6/7] PCI: dwc: designware: Modify _unroll() to _ob_unroll()
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/7] PCI: dwc: dra7xx: Populate cpu_addr_fixup ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/7] PCI: dwc: miscellaneous fixes and cleanups
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/7] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH DO NOT MERGE 5/6] ARM: dts: omap4: add some sample clkctrl data
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v5 0/5] dmaengine: cppi41: Make CPPI 4.1 driver more generic
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 0/5] ARM: OMAP2+: Add and enable operating-points-v2
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH DO NOT MERGE 5/6] ARM: dts: omap4: add some sample clkctrl data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: OMAP3: Fix MFG ID EEPROM
  • From: aford173@xxxxxxxxx
• Re: [PATCH 0/7] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-idk: Add DCAN support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: PM: Drop useless checks for PM_SUSPEND_STANDBY
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap5-uevm sdcard supply woes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap5-uevm sdcard supply woes
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [PATCH 03/12] gpio: omap: use devm_irq_alloc_descs()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap fixes v4.11-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 1/3] ARM: dts: AM35x: Add hecc node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] ARM: omap2plus_defconfig: Enable support for ti-cpufreq
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH 4/5] ARM: dts: dra7: Add updated operating-points-v2 table for cpu
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH 1/5] ARM: dts: am33xx: Add updated operating-points-v2 table for cpu
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH 3/5] ARM: dts: am4372: Update operating-points-v2 table for cpu
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH 2/5] ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH 4/5] ARM: dts: dra7: Add updated operating-points-v2 table for cpu
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 0/5] ARM: OMAP2+: Add and enable operating-points-v2
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 2/5] ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 1/5] ARM: dts: am33xx: Add updated operating-points-v2 table for cpu
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: MUSB Datasheet for OMAP3630
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/5] ARM: omap2plus_defconfig: Enable support for ti-cpufreq
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 3/5] ARM: dts: am4372: Update operating-points-v2 table for cpu
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• MUSB Datasheet for OMAP3630
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v2 04/22] Documentation: PCI: Guide to use pci endpoint configfs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 14/22] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 03/22] PCI: endpoint: Introduce configfs entry for configuring EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 08/12] gpio: davinci: use devm_irq_alloc_descs()
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 2/6] ARM: dts: omap4-droid4: Add LCD backlight
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• [PATCH 1/6] ARM: dts: omap4-droid4: Add touchscreen
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] ARM: dts: omap4-droid4: Add LCD backlight
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] Device tree changes to add more droid 4 devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] ARM: dts: omap4-droid4: Add GPIO poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] ARM: dts: omap4-droid4: Add tmp105 sensor for droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] ARM: dts: omap4-droid4: Add HDMI support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 05/10] drm: omapdrm: crtc: detect manually updated displays
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 04/10] drm: omapdrm: crtc: save framedone callback from dss
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 02/10] drm: omapdrm: panel-dsi-cm: add regulator support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 09/10] drm: omapdrm: crtc: get manual mode displays working
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 07/10] drm: omapdrm: plane: update fifo size on atomic update
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 08/10] drm: omapdrm: crtc: handle framedone directly
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 09/10] drm: omapdrm: crtc: get manual mode displays working
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 06/10] drm: omapdrm: crtc: add support for manual updated displays
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 05/10] drm: omapdrm: crtc: detect manually updated displays
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 03/10] Revert "drm: omapdrm: Remove manual update display support"
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 10/10] ARM: dts: n950: add display support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 04/10] drm: omapdrm: crtc: save framedone callback from dss
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 02/10] drm: omapdrm: panel-dsi-cm: add regulator support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 01/10] drm: omapdrm: panel-dsi-cm: Fix probe for device tree
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 00/10] Nokia N950 basic display support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 07/12] gpio: pxa: use devm_irq_alloc_descs()
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH 07/12] gpio: pxa: use devm_irq_alloc_descs()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 01/12] gpio: mockup: use devm_irq_alloc_descs()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 08/12] gpio: davinci: use devm_irq_alloc_descs()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] ARM: OMAP2+: Fix device node reference counts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/12] gpio: mxs: use devm_irq_alloc_descs()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 10/12] gpio: mxc: use devm_irq_alloc_descs()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 12/12] gpio: sta2x11: use resource management for irqs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 04/12] gpio: pch: use resource management for irqs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 06/12] gpio: xlp: use resource management for irqs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 00/12] gpio: use resource management for irq descriptors
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 05/12] gpio: ml-ioh: use resource management for irqs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 02/12] gpio: twl4030: use devm_irq_alloc_descs()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 09/12] gpio: sodaville: use resource management for irqs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 03/12] gpio: omap: use devm_irq_alloc_descs()
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Microphone gain on N900
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• [PATCH v3 2/2] ARM: OMAP2+: Release device node after it is no longer needed.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 1/2] ARM: OMAP2+: Fix device node reference counts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: omap5-uevm sdcard supply woes
  • From: Michael Mrozek <EvilDragon@xxxxxxxxxxxxxxx>
• Re: omap5-uevm sdcard supply woes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap5-uevm sdcard supply woes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap5-uevm sdcard supply woes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• omap5-uevm sdcard supply woes
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: omap5-uevm sdcard supply woes
  • From: Michael Mrozek <EvilDragon@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Frode Isaksen <fisaksen@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH DO NOT MERGE 5/6] ARM: dts: omap4: add some sample clkctrl data
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH DO NOT MERGE 5/6] ARM: dts: omap4: add some sample clkctrl data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: clk: ti: clkctrl clock support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 00/15] clk: ti: cleanups / fixes for preparation of clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH DO NOT MERGE 5/6] ARM: dts: omap4: add some sample clkctrl data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Frode Isaksen <fisaksen@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: Microphone gain on N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Frode Isaksen <fisaksen@xxxxxxxxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] Droid4 DTS update
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 8/8] ARM: dts: omap4-droid4: Add keypad support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/8] ARM: dts: omap4-droid4: Add compass
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 3/8] ARM: dts: motorola-cpcap-mapphone: add rtc
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 1/8] ARM: dts: omap4-droid4: Add gpio-keys
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 4/8] ARM: dts: motorola-cpcap-mapphone: add pwrbutton
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/8] ARM: dts: omap4-droid4: Configure regulators
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 6/8] ARM: dts: omap4-droid4: Add accelerometer
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 8/8] ARM: dts: omap4-droid4: Add keypad support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 7/8] ARM: dts: omap4-droid4: Add touchscreen
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 0/8] Droid4 DTS update
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: Fix device node reference counts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: Fix device node reference counts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP2+: Fix device node reference counts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 4/7] ARM: OMAP4460: Thermal: Add slope and offset values
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 2/7] ARM: OMAP5: Thermal: Add slope and offset values
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [RFC PATCH 1/2] mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 1/2] mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Frode Isaksen <fisaksen@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers
  • From: Frode Isaksen <fisaksen@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 5/7] thermal: ti-soc-thermal: Fetch slope and offset from DT
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 1/7] ARM: DRA7: Thermal: Add slope and offset values
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 0/7] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 3/7] ARM: OMAP443x: Thermal: Add slope and offset values
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 6/7] thermal: ti-soc-thermal: Remove redundant constants
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 7/7] thermal: ti-soc-thermal: Remove redundant code
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [RFC PATCH 1/2] mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 1/2] mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 1/2] mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH v2] ARM: OMAP2+: Fix device node reference counts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Richard Weinberger <richard@xxxxxx>
• Re: Microphone gain on N900
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: ARM: OMAP2+: Grab reference to device nodes where needed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: ARM: OMAP2+: Grab reference to device nodes where needed
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] memory: omap-gpmc: Drop gpmc_status
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: omap3-igep: OneNAND support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] memory: omap-gpmc: Drop gpmc_status
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-pcm953: Fix legacy wakeup source binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: OMAP2+: Grab reference to device nodes where needed
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [PATCH v5 2/3] can: ti_hecc: Add TI HECC DT binding documentation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 14/22] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: ARM: OMAP2+: Grab reference to device nodes where needed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] can: ti_hecc: Add TI HECC DT binding documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Microphone gain on N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2 14/22] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [RFC PATCH 0/2] mtd: spi-nor: Handle vmalloc'd buffers
  • From: Frode Isaksen <fisaksen@xxxxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [RFC PATCH 1/2] mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers
  • From: Vignesh R <vigneshr@xxxxxx>
• [RFC PATCH 0/2] mtd: spi-nor: Handle vmalloc'd buffers
  • From: Vignesh R <vigneshr@xxxxxx>
• [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] usb: dwc3: Fix incorrect type for utmi mode
  • From: Franck Demathieu <fdemathieu@xxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: DA850-EVM (L-138) Booting from SD Broken on 4.10-RC1 and newer
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Microphone gain on N900
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] ASoC: omap: Remove unnecessary 'out of memory' message
  • From: Adriana Constantinescu <constantinescu33@xxxxxxxxx>
• Re: [PATCH] ASoC: omap: Remove unnecessary 'out of memory' message
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3.1] [media] serial_ir: ensure we're ready to receive interrupts
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• [PATCH v3] [media] serial_ir: ensure we're ready to receive interrupts
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• [PATCH] ASoC: omap: Remove unnecessary 'out of memory' message
  • From: Adriana Constantinescu <constantinescu33@xxxxxxxxx>
• [PATCH] [media] serial_ir: ensure we're ready to receive interrupts
  • From: Sean Young <sean@xxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Sean Young <sean@xxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• media / serial_ir: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: dts: omap4-droid4: Add gpio-keys
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn
  • From: Emil Velikov <emil.l.velikov@xxxxxxxxx>
• Re: [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn
  • From: Rob Herring <robh@xxxxxxxxxx>
• DA850-EVM (L-138) Booting from SD Broken on 4.10-RC1 and newer
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v9 5/8] dt-bindings: input: move ads7846 bindings to touchscreen subdirectory
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH 3/3] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/3] memory: omap-gpmc: Drop gpmc_status
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] ARM: dts: am57xx-idk: Add DCAN support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH] ARM: dts: am57xx-idk: Add DCAN support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH 3/3] mtd: nand: omap2: Remove omap_nand_platform_data
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH 2/3] memory: omap-gpmc: Drop gpmc_status
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCHv2 1/3] ARM: OMAP2+: Remove legacy gpmc-nand.c
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [Letux-kernel] [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Christ van Willegen <cvwillegen@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: davinci: PM: Drop useless check for PM_SUSPEND_STANDBY
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Petr Cvek <petr.cvek@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Petr Cvek <petr.cvek@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [Letux-kernel] [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [Letux-kernel] [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] memory: omap-gpmc: honour OneNAND base address from FDT
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 4/4] memory: omap-gpmc: honour OneNAND base address from FDT
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2+: gpmc-nand: fix error unwinding
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/3] ARM: davinci: PM: Drop useless check for PM_SUSPEND_STANDBY
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] PCI: dwc: dra7xx: Populate cpu_addr_fixup ops
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [PATCH 1/3] ARM: davinci: PM: Drop useless check for PM_SUSPEND_STANDBY
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [Letux-kernel] [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [Letux-kernel] [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: socfpga: PM: Drop useless check for PM_SUSPEND_STANDBY
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2+: gpmc-nand: fix error unwinding
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] memory: omap-gpmc: honour OneNAND base address from FDT
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2+: gpmc-nand: fix error unwinding
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 8/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [Letux-kernel] [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v9 8/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v9 2/8] drivers:input:tsc2007: check for presence and power down tsc2007 during probe
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v9 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values)
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support
  • From: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx>
• Re: [PATCH v2 04/22] Documentation: PCI: Guide to use pci endpoint configfs
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>