Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH 1/8] arm: omap4: enable CEC pin for Pandaboard A4 and ES
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] [4.11 regression] cpsw/netcp: refine cpts dependency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/8] arm: omap4: enable CEC pin for Pandaboard A4 and ES
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] [4.11 regression] cpsw/netcp: refine cpts dependency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/8] arm: omap4: enable CEC pin for Pandaboard A4 and ES
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] dt: gta04: fix polarity of clocks for mcbsp4
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2] gpio: omap: return error if requested debounce time is not possible
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH net-next] dt-bindings: mdio: Clarify binding document
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 3/3] ti-soc-thermal: Fix a typo in a comment line
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH net-next] dt-bindings: mdio: Clarify binding document
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [patch] propagating controls in libv4l2 was Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [patch] propagating controls in libv4l2 was Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• [patch] propagating controls in libv4l2 was Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] omapfb: Use devm_kcalloc() in vrfb_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] gpio: omap: return error if requested debounce time is not possible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next] dt-bindings: mdio: Clarify binding document
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH V4 07/17] thermal: cpu_cooling: use cpufreq_policy to register cooling device
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2] cpsw: ethtool: add support for getting/setting EEE registers
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• [PATCH v2] gpio: omap: return error if requested debounce time is not possible
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv2 3/9] dt-bindings: clk: add omap4 clkctrl definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCHv2 0/2] mfd: omap-usb-tll: Fixes for USB TLL mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mfd: menelaus: remove obsolete local_irq_disable() and local_irq_enable()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv2 0/2] mfd: omap-usb-tll: Fixes for USB TLL mode
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• [PATCH] serial: 8250: omap: Disable DMA for console UART
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/2] clk: ti: fix building without legacy omap3
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add can_dma like interface for spi_flash_read" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: update entry for TI's CPSW driver
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/2] clk: ti: fix building without legacy omap3
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: [PATCH v3 0/7] iommu/omap: Add support for iommu-groups and 'struct iommu_device'
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/2] gpio: omap: compute debounce-time from actual debounce-clock rate
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: [PATCH v2] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH V5 2/7] ARM: TI: Use - instead of @ for DT OPP entries
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH V4 2/7] ARM: TI: Use - instead of @ for DT OPP entries
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 03/21] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V3] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] ARM: dts: am335x-phycore-som: fix rv4162 compatible
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v5,4/8] ARM: dts: n8x0: Add vendor prefix to retu node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [v5,2/8] mfd: retu: Drop -mfd suffix from I2C device ID name
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/2] clk: ti: fix building without legacy omap3
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCHv3] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCHv3] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH V3] PM / OPP: Use - instead of @ for DT entries
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 1/2] omap devicetree changes for v4.12, part 2
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 2/2] omap defconfig changes for v4.12
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [Query] Enabling parent device clock from resume_noirq
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] MAINTAINERS: update entry for TI's CPSW driver
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] usb: musb: Fix trying to suspend while active for OTG configurations
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] mfd: menelaus: remove obsolete local_irq_disable() and local_irq_enable()
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxx>
• [PATCH V3 07/17] thermal: cpu_cooling: use cpufreq_policy to register cooling device
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [Query] Enabling parent device clock from resume_noirq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Applied "regulator: tps65023: Fix inverted core enable logic." to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] cpsw: ethtool: add support for getting/setting EEE registers
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: Re: [PATCH v2] cpsw: ethtool: add support for getting/setting EEE registers
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: Stop disabling SRAM and GPMC
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: et8ek8 camera on Nokia N900: trying to understand what is going on with modes
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 2/2] mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: 8250: Possible race between console message vs DMA?
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v6 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: 8250: Possible race between console message vs DMA?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Ravikumar <rk@xxxxxx>
• [Query] Enabling parent device clock from resume_noirq
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] RTC: Add functionality to read/write rtc scratch registers
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH V3] PM / OPP: Use - instead of @ for DT entries
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v6 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v6 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v5 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: Microphone gain on N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v5 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: add bluetooth
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] regulator: tps65023: Fix inverted core enable logic.
  • From: Richard Cochran <rcochran@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: Add power hold and power controller properties to palmas
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH V2 07/17] thermal: cpu_cooling: use cpufreq_policy to register cooling device
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v7 0/3] usb: musb: da8xx: Add DMA support
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [GIT PULL] omap deferred probe regression fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap deferred probe regression fix
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: add bluetooth
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: add bluetooth
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] ARM: dts: omap4-droid4: add bluetooth
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/2] mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/2] mfd: omap-usb-tll: Fixes for USB TLL mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Adam Ford <aford173@xxxxxxxxx>
• regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v5 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v5 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v4 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: Add power hold and power controller properties to palmas
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 03/21] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] fbdev: omapfb: delete check_required_callbacks()
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v4 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v3 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v3 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v3 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH v3 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v3 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v3 03/21] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• OMAP DRM generating errors on 4.11-RC6
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 03/22] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: omapdrm regressions on n900
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Allow orderly_poweroff to be called only once
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH] ARM: dts: dra7: Add power hold and power controller properties to palmas
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• et8ek8 camera on Nokia N900: trying to understand what is going on with modes
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] mfd: menelaus: remove obsolete local_irq_disable() and local_irq_enable()
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v5 2/8] mfd: retu: Drop -mfd suffix from I2C device ID name
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v5 4/8] ARM: dts: n8x0: Add vendor prefix to retu node
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v5 0/8] mfd: Add OF device table to I2C drivers that are missing it
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 1/1] ARM: dts: dra7: Reduce cpu thermal shutdown temperature
  • From: Ravikumar Kattekola <rk@xxxxxx>
• Re: [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 5/7] iommu/omap: Make use of 'struct iommu_device'
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v3 1/7] iommu/omap: Register driver before setting IOMMU ops
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v3 3/7] iommu/omap: Move data structures to omap-iommu.h
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v3 4/7] iommu/omap: Store iommu_dev pointer in arch_data
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v3 6/7] iommu/omap: Add iommu-group support
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v3 7/7] [media] omap3isp: Remove iommu_group related code
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v3 0/7] iommu/omap: Add support for iommu-groups and 'struct iommu_device'
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v3 2/7] iommu/omap: Drop legacy-style device support
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mfd: palmas: Fixed spelling mistake in error message.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] mfd: palmas: Fixed spelling mistake in error message.
  • From: Willis Monroe <willismonroe@xxxxxxxxx>
• Re: [PATCHv3] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 2/8] mfd: retu: Drop -mfd suffix from I2C device ID name
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/1] ARM: dts: dra7x-evm: Enable dual-role mode for USB1
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/1] ARM: dts: dra7x-evm: Enable dual-role mode for USB1
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 0/2] spi-ti-qspi: Handle vmalloc'd buffers
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 1/2] spi: Add can_dma like interface for spi_flash_read
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] mtd: nand: omap2: Fix partition creation via cmdline mtdparts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] mfd: cpcap: Fix bad use of IRQ sense register
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/3] mfd: cpcap: Use ack_invert interrupts
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/3] mfd: cpcap: Fix interrupt to use level interrupt
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/2] omap defconfig changes for v4.12
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/2] omap devicetree changes for v4.12, part 2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [GIT PULL] omap deferred probe regression fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Enable droid 4 devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mfd: menelaus: remove obsolete local_irq_disable() and local_irq_enable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] serial: omap: fix runtime-pm handling on unbind
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] serial: omap: suspend device on probe errors
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR()
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v7 01/23] PCI: endpoint: Add EP core layer to enable EP controller and EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] mfd: menelaus: remove obsolete local_irq_disable() and local_irq_enable()
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxx>
• [PATCH 2/2] serial: omap: suspend device on probe errors
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 1/2] serial: omap: fix runtime-pm handling on unbind
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: 8250: Possible race between console message vs DMA?
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [balbi-usb:testing/next 46/49] undefined reference to `extcon_get_edev_by_phandle'
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [balbi-usb:testing/next 46/49] undefined reference to `extcon_get_edev_by_phandle'
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] net: davinci_mdio: add GPIO reset logic
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: drm_modeset_lock oops in next
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• [PATCHv3] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Enable droid 4 devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 8250: Possible race between console message vs DMA?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [balbi-usb:testing/next 46/49] undefined reference to `extcon_get_edev_by_phandle'
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: drm_modeset_lock oops in next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [balbi-usb:testing/next 46/49] undefined reference to `extcon_get_edev_by_phandle'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH] net: davinci_mdio: add GPIO reset logic
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] net: davinci_mdio: add GPIO reset logic
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] net: davinci_mdio: add GPIO reset logic
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: drm_modeset_lock oops in next
  • From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
• Re: [4.4-RT PATCH RFC/RFT] drivers: net: cpsw: mark rx/tx irq as IRQF_NO_THREAD
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] fbdev: omapfb: delete check_required_callbacks()
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v2] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• drm_modeset_lock oops in next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH] usb: musb: Fix trying to suspend while active for OTG configurations
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Bin Liu <b-liu@xxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• 8250: Possible race between console message vs DMA?
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: N900 failure in next-20170321
  • From: Pavel Machek <pavel@xxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] net: davinci_mdio: add GPIO reset logic
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] net: davinci_mdio: add GPIO reset logic
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] net: davinci_mdio: add GPIO reset logic
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH][linux-next] dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe()
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v6 01/23] PCI: endpoint: Add EP core layer to enable EP controller and EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v6 01/23] PCI: endpoint: Add EP core layer to enable EP controller and EP functions
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH][linux-next] dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe()
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 01/23] PCI: endpoint: Add EP core layer to enable EP controller and EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 18/23] Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 07/23] PCI: endpoint: functions: Add an EP function to test PCI
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 04/23] Documentation: PCI: Guide to use PCI endpoint configfs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 05/23] PCI: endpoint: Create configfs entry for EPC device and EPF driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 06/23] Documentation: PCI: Add specification for the *PCI test* function device
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 15/23] dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 11/23] PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 02/23] Documentation: PCI: Guide to use PCI Endpoint Core Layer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 21/23] Documentation: PCI: Add userguide for PCI endpoint test function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 17/23] misc: Add host side PCI driver for PCI test function device
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 16/23] PCI: Add device IDs for DRA74x and DRA72x
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 14/23] PCI: dwc: dra7xx: Workaround for errata id i870
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 10/23] dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] net: davinci_mdio: add GPIO reset logic
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] clk: ti: cleanups for 4.12 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 0/3] phy: Group phy drivers based on vendor listing
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v4 0/3] phy: Group phy drivers based on vendor listing
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 20/23] tools: PCI: Add sample test script to invoke pcitest
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 09/23] PCI: dwc: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 08/23] Documentation: PCI: Add binding documentation for pci-test endpoint function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 22/23] MAINTAINERS: Add PCI Endpoint maintainer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 03/23] PCI: endpoint: Introduce configfs entry for configuring EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 23/23] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 12/23] PCI: dwc: dra7xx: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 13/23] dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v6 19/23] tools: PCI: Add a userspace tool to test PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 0/2] ARM: am335x-icev2: Add ethernet support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v5 14/24] dt-bindings: mfd: syscon: Add documentation for #syscon-cells property
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] net: davinci_mdio: add GPIO reset logic
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v7 2/3] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [GIT PULL] clk: ti: cleanups for 4.12 merge window
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 0/2] ARM: am335x-icev2: Add ethernet support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: fix race condition during open()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 6/8] ARM: OMAP2+: pm33xx-core: Add platform code needed for PM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] clk: ti: cleanups for 4.12 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: am335x-icev2: Add ethernet support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-idk: Add DCAN support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v4 4/8] ARM: dts: n8x0: Add vendor prefix to retu node
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v4 2/8] mfd: retu: Drop -mfd suffix from I2C device ID name
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] mfd: cpcap: Fix interrupt to use level interrupt
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• usb: musb: regression since 4.9 on omap4-panda-es (caused by d8e5f0eca1e8)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCHv2] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: omap4-droid4: Fix interrupt triggering for cpcap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] mfd: cpcap: Use handle_reread flag for interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] mfd: cpcap: Use ack_invert interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] mfd: cpcap: Fix interrupt to use level interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] mfd: cpcap: Fix bad use of IRQ sense register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv3 0/3] CPCAP PMIC IRQ fix and related changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/7] mfd: retu: Add OF device ID table
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v3 2/7] mfd: retu: Add OF device ID table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/7] mfd: retu: Add OF device ID table
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/7] mfd: retu: Add OF device ID table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RESEND PATCH v6 4/4] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 2/3] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] Documentation: dt: Update ti,emif bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] mfd: cpcap: Use handle_reread flag for interrupts
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv2 9/9] ARM: dts: omap4: convert to use the new clkctrl clocks for the drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] mfd: cpcap: Use handle_reread flag for interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] net: ethernet: ti: cpsw: fix race condition during open()
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 4/4] mfd: cpcap: Fix bad use of IRQ sense register
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/4] mfd: cpcap: Use ack_invert interrupts
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/4] mfd: cpcap: Use handle_reread flag for interrupts
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v3 4/7] ARM: dts: n8x0: Add vendor prefix to retu node
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 0/7] mfd: Add OF device table to I2C drivers that are missing it
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH] net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5 16/24] dt-bindings: PCI: dra7xx: Add dt bindings to enable unaligned access
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 14/24] dt-bindings: mfd: syscon: Add documentation for #syscon-cells property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 14/24] dt-bindings: mfd: syscon: Add documentation for #syscon-cells property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/2] spi: Add can_dma like interface for spi_flash_read
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 0/2] spi-ti-qspi: Handle vmalloc'd buffers
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [GIT PULL 2/2] omap devicetree changes for v4.12
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCHv2 1/3] ARM: OMAP2+: Remove legacy gpmc-nand.c
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCHv2 1/3] ARM: OMAP2+: Remove legacy gpmc-nand.c
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v4 0/7] PCI: dwc: Miscellaneous fixes and cleanups
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v4 0/7] PCI: dwc: Miscellaneous fixes and cleanups
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCHv3] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv3] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 1/2] omap soc changes for v4.12
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-idk: Add DCAN support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 0/2] ARM: am335x-icev2: Add ethernet support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCHv2] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL] omap fixes for v4.11-rc cycle
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] mtd: nand: omap2: Fix partition creation via cmdline mtdparts
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCHv2 9/9] ARM: dts: omap4: convert to use the new clkctrl clocks for the drivers
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 1/3] ARM: OMAP2+: Remove legacy gpmc-nand.c
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2 3/8] ARM: OMAP5: Thermal: Add slope and offset values
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCHv3] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Passing NAND mtdparts to OMAP2+ Kernel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 0/8] ARM: OMAP2+: AM33XX/AM43XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 0/8] ARM: OMAP2+: AM33XX/AM43XX: Add suspend-resume support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/2] omap devicetree changes for v4.12
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/2] omap soc changes for v4.12
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap fixes for v4.11-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 2/3] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v7 1/3] usb: musb: Use shared irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v7 0/3] usb: musb: da8xx: Add DMA support
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v7 2/3] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH v7 3/3] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: davinci: Add the clock for the CPPI 4.1 DMA engine
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: Passing NAND mtdparts to OMAP2+ Kernel
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Passing NAND mtdparts to OMAP2+ Kernel
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: Passing NAND mtdparts to OMAP2+ Kernel
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: Passing NAND mtdparts to OMAP2+ Kernel
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: Passing NAND mtdparts to OMAP2+ Kernel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RESEND PATCH v6 4/4] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 3/8] ARM: OMAP5: Thermal: Add slope and offset values
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCHv2] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 4/8] ARM: OMAP2+: Introduce low-level suspend code for AM33XX
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 5/8] ARM: OMAP2+: Introduce low-level suspend code for AM43XX
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 6/8] ARM: OMAP2+: pm33xx-core: Add platform code needed for PM
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 3/8] ARM: OMAP2+: pm: Remove __init from omap_pm_clkdms_setup
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 0/8] ARM: OMAP2+: AM33XX/AM43XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 1/8] ARM: OMAP: Wakeupgen: Add context save/restore for AM43XX
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 7/8] soc: ti: Add pm33xx driver for basic suspend support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 2/8] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 8/8] ARM: OMAP2+: Create dummy platform_device for pm33xx
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 1/2] Documentation: dt: Update ti,emif bindings
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH 0/2] memory: Introduce ti-emif-sram driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Passing NAND mtdparts to OMAP2+ Kernel
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: am335x-baltos: add LED support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Passing NAND mtdparts to OMAP2+ Kernel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Passing MTD Partiions from U-Boot to OMAP2+ Kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 9/9] ARM: dts: omap4: convert to use the new clkctrl clocks for the drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Passing MTD Partiions from U-Boot to OMAP2+ Kernel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH v2] ARM: dts: am335x-baltos: add LED support
  • From: yegorslists@xxxxxxxxxxxxxx
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCHv2 9/9] ARM: dts: omap4: convert to use the new clkctrl clocks for the drivers
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Moreno Bartalucci <moreno.bartalucci@xxxxxxxxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: dts: omap4-droid4: Stop disabling SRAM and GPMC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: omap4-droid4: Fix MMC1 card for detect GPIO and regulator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH v6 4/4] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 9/9] ARM: dts: omap4: convert to use the new clkctrl clocks for the drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH v6 4/4] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH 1/4] regmap: irq: Fix lost interrupts by introducing handle_reread
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-baltos: add LED support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH v6 4/4] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: dts: am335x-baltos: add LED support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND PATCH v6 4/4] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCHv3] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Moreno Bartalucci <moreno.bartalucci@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP3: Fix MFG ID EEPROM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/7] dwc3 - bug fixes and use meaningful goto labels
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Moreno Bartalucci <moreno.bartalucci@xxxxxxxxxxxx>
• [PATCH v5 23/24] MAINTAINERS: add PCI EP maintainer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 01/24] PCI: endpoint: Add EP core layer to enable EP controller and EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 12/24] PCI: dwc: dra7xx: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 03/24] PCI: endpoint: Introduce configfs entry for configuring EP functions
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 14/24] dt-bindings: mfd: syscon: Add documentation for #syscon-cells property
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 05/24] PCI: endpoint: Create configfs entry for EPC device and EPF driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 04/24] Documentation: PCI: Guide to use pci endpoint configfs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 11/24] PCI: dwc: dra7xx: Facilitate wrapper and msi interrupts to be enabled independently
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 02/24] Documentation: PCI: Guide to use PCI Endpoint Core Layer
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 15/24] PCI: dwc: dra7xx: Workaround for errata id i870
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 09/24] PCI: dwc: designware: Add EP mode support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 06/24] Documentation: PCI: Add specification for the *pci test* function device
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 24/24] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 08/24] Documentation: PCI: Add binding documentation for pci-test endpoint function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 18/24] misc: Add host side pci driver for pci test function device
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 21/24] tools: PCI: Add sample test script to invoke pcitest
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 13/24] dt-bindings: PCI: dra7xx: Add dt bindings for pci dra7xx EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 16/24] dt-bindings: PCI: dra7xx: Add dt bindings to enable unaligned access
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 20/24] tools: PCI: Add a userspace tool to test PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 19/24] Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 22/24] Documentation: PCI: Add userguide for PCI endpoint test function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 17/24] PCI: Add device IDs for DRA74x and DRA72x
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 10/24] dt-bindings: PCI: Add dt bindings for pci designware EP mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 07/24] PCI: endpoint: functions: Add an EP function to test PCI
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [GIT PULL] PCI: Support for configurable PCI endpoint
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCHv2] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCHv3] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
  • From: "Reizer, Eyal" <eyalr@xxxxxx>
• Re: [PATCHv2] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP3: Fix MFG ID EEPROM
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCHv2] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCHv3] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] usb: dwc3: dwc3-omap: fix dwc3_omap_probe() do put_sync when get_sync works
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 1/7] usb: dwc3: core: fix dwc3_probe() to not do put_sync when get_sync fails
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 0/7] dwc3 - bug fixes and use meaningful goto labels
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Lars Melin <larsm17@xxxxxxxxx>
• [PATCH 3/7] usb: dwc3: core: change goto labels to meaningful names
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 1/7] usb: dwc3: core: fix dwc3_probe() to not do put_sync when get_sync fails
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 4/7] usb: dwc3: exynos: change goto labels in this file to meaningful names
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 6/7] usb: dwc3: gadget: change goto labels in this file to meaningful names
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 2/7] usb: dwc3: dwc3-omap: fix dwc3_omap_probe() do put_sync when get_sync works
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 7/7] usb: dwc3: host: change goto labels in this file to meaningful names
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 5/7] usb: dwc3: omap: change goto labels in this file to meaningful names
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH 0/7] dwc3 - bug fixes and use meaningful goto labels
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• Re: [PATCHv2] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Applied "spi: spi-ti-qspi: Use dma_engine wrapper for dma memcpy call" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "regulator: twl6030: remove redundant range check min_uV > 1300000 && min_uV <= 1350000" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RESEND PATCH v6 4/4] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] regulator: twl6030: remove redundant range check min_uV > 1300000 && min_uV <= 1350000
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCHv2 10/10] ARM: dts: n950: add display support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 10/10] ARM: dts: n950: add display support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: dts: am335x-baltos: add LED support
  • From: yegorslists@xxxxxxxxxxxxxx
• Re: [PATCHv2 10/10] ARM: dts: n950: add display support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 10/10] ARM: dts: n950: add display support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [RESEND PATCH v6 2/4] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [RESEND PATCH v6 4/4] usb: musb: da8xx: Add a primary support of PM runtime
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [RESEND PATCH v6 3/4] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [RESEND PATCH v6 1/4] usb: musb: Use shared irq
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [RESEND PATCH v6 0/4] usb: musb: da8xx: Add DMA support
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCHv2 10/10] ARM: dts: n950: add display support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] mfd: palmas: Reset the POWERHOLD mux during power off
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 3/5] mfd: palmas: Reset the POWERHOLD mux during power off
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCHv2] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2 3/5] mfd: palmas: Reset the POWERHOLD mux during power off
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] drm: omapdrm: Fix oops on rmmod
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] spi: spi-ti-qspi: Use dma_engine wrapper for dma memcpy call
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCHv3] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: bus: TI interconnect target module binding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] dt-bindings: bus: TI interconnect target module binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv2] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: am335x-icev2: Add support for W25Q64 NOR flash
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am437x-gp-evm: Add pinmux for uart0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] ARM: dm8168-evm: add SATA support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] ARM: OMAP2+: Add and enable operating-points-v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: OMAP2+ hwmod: Allow modules to disable HW_AUTO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: OMAP3: Fix MFG ID EEPROM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] drm: omapdrm: Fix oops on rmmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: gpio-omap: Edge interrupts stall
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [PATCH 23/35] drivers/mfd: Convert remaining uses of pr_warning to pr_warn
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCHv2 0/9] clk: ti: add support for clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>