Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 04/20/2017 09:44 AM, David Rivshin wrote:
Hi Grygorii,

Not sure if you saw the question at the bottom asking for clarification
on what you'd prefer as far as any dev_xxx() message for this case. If
there is still concern on the other patch, I could just resubmit this
standalone (perhaps aiming for 4.12 at this point).

Could you add dev info and resubmit this alone, pls



On Fri, 17 Mar 2017 19:42:35 -0400
David Rivshin <drivshin@xxxxxxxxx> wrote:

On Fri, 17 Mar 2017 16:43:56 -0500
Grygorii Strashko <grygorii.strashko@xxxxxx> wrote:

On 03/17/2017 03:50 PM, David Rivshin wrote:
On Fri, 17 Mar 2017 13:54:28 -0500
Grygorii Strashko <grygorii.strashko@xxxxxx> wrote:

On 03/17/2017 12:54 PM, David Rivshin wrote:
Hi Grygorii,

On Fri, 17 Mar 2017 11:45:56 -0500
Grygorii Strashko <grygorii.strashko@xxxxxx> wrote:

On 03/16/2017 07:57 PM, David Rivshin wrote:
From: David Rivshin <DRivshin@xxxxxxxxxxx>

omap_gpio_debounce() does not validate that the requested debounce
is within a range it can handle. Instead it lets the register value
wrap silently, and always returns success.

This can lead to all sorts of unexpected behavior, such as gpio_keys
asking for a too-long debounce, but getting a very short debounce in
practice.

Fix this by returning -EINVAL if the requested value does not fit into
the register field. If there is no debounce clock available at all,
return -ENOTSUPP.

In general this patch looks good, but there is one thing I'm worry about..


Fixes: e85ec6c3047b ("gpio: omap: fix omap2_set_gpio_debounce")
Cc: <stable@xxxxxxxxxxxxxxx> # 4.3+
Signed-off-by: David Rivshin <drivshin@xxxxxxxxxxx>
---
 drivers/gpio/gpio-omap.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index efc85a2..33ec02d 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -208,8 +208,10 @@ static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
  * OMAP's debounce time is in 31us steps
  *   <debounce time> = (GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME + 1) x 31
  * so we need to convert and round up to the closest unit.
+ *
+ * Return: 0 on success, negative error otherwise.
  */
-static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
+static int omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
 				    unsigned debounce)
 {
 	void __iomem		*reg;
@@ -218,11 +220,12 @@ static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
 	bool			enable = !!debounce;

 	if (!bank->dbck_flag)
-		return;
+		return -ENOTSUPP;

 	if (enable) {
 		debounce = DIV_ROUND_UP(debounce, 31) - 1;
-		debounce &= OMAP4_GPIO_DEBOUNCINGTIME_MASK;
+		if ((debounce & OMAP4_GPIO_DEBOUNCINGTIME_MASK) != debounce)
+			return -EINVAL;

This might cause boot issues as current drivers may expect this op to succeed even if
configured value is wrong - just think, may be we can do warn here and use max value as
fallback?

I have not looked through all drivers to be sure, but at least the gpio-keys
driver requires set_debounce to return an error if it can't satisfy the request.
In that case gpio-keys will use a software timer instead.

                if (button->debounce_interval) {
                        error = gpiod_set_debounce(bdata->gpiod,
                                        button->debounce_interval * 1000);
                        /* use timer if gpiolib doesn't provide debounce */
                        if (error < 0)
                                bdata->software_debounce =
                                                button->debounce_interval;
                }

Also, at least some other GPIO drivers (e.g. gpio-max7760) return -EINVAL in
such a case. And gpiolib will return -ENOTSUPP if there is no debounce
callback at all. So I expect all drivers which use gpiod_set_debounce() to
handle error returns gracefully.

So I certainly understand the concern about backwards compatibility, but I
think clipping to max is the greater of the evils in this case. Even a
warning may be too much, because it's not necessarily anything wrong.
Perhaps an info or debug message would be helpful, though?

If you prefer, I can try to go through all callers of gpiod_set_debounce()
and see how they'd handle an error return. The handful I've looked through so
far all behave like gpio-keys. The only ones I'd be particularly concerned
about are platform-specific drivers which were perhaps never used with other
gpio drivers. Do you know of that I should pay special attention to?

Yeh agree. But the problem here will be not only with drivers itself - it can be wrong data in DT :(
As result, even  gpio-keys driver will just silently switch to software_debounce
without any notification.

I think that switching to software_debounce silently is exactly the
intended/desired behavior of gpio-keys (and other drivers). For example,
if the DT requests a 20ms debounce on a gpio-key, the existing math
resulted in a hardware debounce of just 2ms. With the error return,
gpio-keys would silently switch to software_debounce of the requested
20ms (potentially longer if the CPU is busy, but I don't think that's
a problem for correctness), exactly what the DT asked for.

[...snip...]

But agree - max might not be a good choose, so can you add dev_err() below, pls.

Given the above, I personally feel that a dev_err() is undesirable in most
cases. If I have a system and matching DT that just happens to need a longer
debounce than the GPIO HW is capable of, gpio-keys (etc) does the best it can automatically. I don't consider that there is any error in that case, or
anything to be fixed.
I can understanding wanting to draw attention to a change in behavior (just
in case the DT is incorrect), but I'd personally lean towards dev_info() if
anything.

That said: if you still prefer dev_err(), I will certainly do so.

Fair enough :) thanks.

Acked-by: Grygorii Strashko <grygorii.strashko@xxxxxx>

Just to make sure I don't misunderstand, would you like me to:
A) put in a dev_err()
B) put in a dev_info()
C) leave it as-is without any message
?

[...snip...]

FYI, I have searched for all uses of gpio{,d}_set_debounce (in v4.11-rc1),
and found nothing concerning. Most drivers fall back to software debounce.

The only exception I found was mmc_spi (via mmc_gpio_request_cd), but the
only time that has a non-zero debounce requested is for vision_ep9307 which
is hardcoded to ask for a 1us debounce via platform data. I don't believe
ep93xx would use the gpio-omap driver anyways. The mmc-spi-slot devicetree
binding doesn't support setting a debounce on any of the GPIOs.


--
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux