Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCHv2] power: supply: cpcap-battery: Add a battery driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] iio: adc: cpcap: Remove hung interrupt quirk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] iio: adc: cpcap: Fix die temperature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] iio: adc: cpcap: Fix default register values and battery temperature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/3] Few non-critical cpcap ADC fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] power: supply: cpcap-battery: Add a battery driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv4] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] pci: dwc: dra7xx: Depend on appropriate SoC or compile test
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: Enable earlycon stdout path for LogicPD torpedo
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/3] mfd: lp87565: Add lp87565 PMIC support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/3] regulator: tps65917: Add support for SMPS12
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv4] wlcore: add wl1285 compatible
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] pinctrl: single: use of_device_get_match_data() to get soc data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4] wlcore: add wl1285 compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: Enable earlycon stdout path for duovero
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: Enable earlycon stdout path for LogicPD torpedo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4] wlcore: add wl1285 compatible
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] ARM: dts: Configure USB host for 37xx-evm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] usb: host: ohci-platform: Add support for omap3 and later
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/3] Make ohci-platform usable for omap3/4/5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] usb: host: ohci-omap3: Remove driver in favor of ohci-platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] usb: host: ohci-platform: Add support for omap3 and later
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] usb: host: ohci-platform: Add basic runtime PM support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4] wlcore: add wl1285 compatible
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCHv4] wlcore: add wl1285 compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: OMAP3630 DSP Question
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] ARM: OMAP2+: pm33xx-core: Add platform code needed for PM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] Documentation: dt: Update ti,emif bindings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] arm: dts: boneblack-wireless: add WL1835 Bluetooth device node
  • From: Ricardo Salveti <ricardo.salveti@xxxxxxxxxx>
• Re: [PATCHv4] wlcore: add wl1285 compatible
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCHv4] wlcore: add wl1285 compatible
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v4 03/20] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• OMAP3630 DSP Question
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 00/41] omap_hsmmc: Add ADMA support and UHS/HS200/DDR support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCHv4] wlcore: add wl1285 compatible
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 1/2] ARM: dts: am335x-sl50: Fix card detect pin for mmc1
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] mfd: tps65010: move header file out of I2C realm
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mfd: tps65010: move header file out of I2C realm
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] regulator: lp87565: Add support for lp87565 PMIC regulators
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 1/3] mfd: lp87565: Add lp87565 PMIC support
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 2/3] mfd: tps65010: move header file out of I2C realm
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/3] mfd: move include files out of include/linux/i2c
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/3] mfd: twl: move header file out of I2C realm
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC 2/3] misc: Add w2sg0004 (gps receiver) power control driver
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 3/3] misc: Add w2cbw003 (wifi/bluetooth) power control driver
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 0/3] misc: new serdev based drivers for w2sg00x4 GPS module and w2cbw003 wifi/bluetooth
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 2/3] misc: Add w2sg0004 (gps receiver) power control driver
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 1/3] DTS: gta04: add serdev nodes for w2sg00x4, w2cbw etc.
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 2/3] ARM: dts: twl4030: Add missing madc reference for bci subnode
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 3/3] drivers:power:twl4030-charger: add deferred probing for phy and iio
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 1/3] drivers:power:twl4030-charger: remove nonstandard max_current sysfs attribute
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v5 0/3] More fixes for twl4030 charger
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] power: supply: cpcap-battery: Add a battery driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: cpcap: Fix die temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: cpcap: Fix die temperature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] pinctrl: single: use of_device_get_match_data() to get soc data
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: cpcap: Fix default register values and battery temperature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: cpcap: Remove hung interrupt quirk
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: cpcap: Fix die temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: cpcap: Fix default register values and battery temperature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: cpcap: Remove hung interrupt quirk
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am335x-sl50: Fix card detect pin for mmc1
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: cpcap: Fix default register values and battery temperature
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] Documentation: dt: Update ti,emif bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv3 4/4] clk: ti: omap4: add clkctrl clock data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 2/4] clk: ti: add support for clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/41] omap_hsmmc: Add ADMA support and UHS/HS200/DDR support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: am572x-idk: Enable the system mailboxes 5 and 6
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 2/2] ARM: dts: am571x-idk: Enable the system mailboxes 5 and 6
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 0/2] Enable Mailboxes for AM57xx IDKs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 5/5] ARM: OMAP2+: Create dummy platform_device for pm33xx
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 2/5] ARM: OMAP2+: Introduce low-level suspend code for AM43XX
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 4/5] soc: ti: Add pm33xx driver for basic suspend support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 3/5] ARM: OMAP2+: pm33xx-core: Add platform code needed for PM
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 1/5] ARM: OMAP2+: Introduce low-level suspend code for AM33XX
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 0/5] ARM: OMAP2+: AM33XX/AM43XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 1/2] Documentation: dt: Update ti,emif bindings
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 2/2] memory: ti-emif-sram: introduce relocatable suspend/resume handlers
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v2 0/2] memory: Introduce ti-emif-sram driver
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: am335x-sl50: Fix card detect pin for mmc1
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] regulator: lp87565: Add support for lp87565 PMIC regulators
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 1/3] mfd: lp87565: Add lp87565 PMIC support
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH v4] usb: musb: musb_cppi41: Defer probe only if DMA is not ready
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCH v3] usb: musb: musb_cppi41: Update an error message
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v3] usb: musb: musb_cppi41: Update an error message
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• [PATCH 1/3] mfd: lp87565: Add lp87565 PMIC support
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 3/3] regulator: tps65917: Add support for SMPS12
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 2/3] regulator: lp87565: Add support for lp87565 PMIC regulators
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 0/3] mfd: lp87565: Add lp87565 PMIC support
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 07/41] mmc: host: omap_hsmmc: Allow io voltage switch even for fixed vdd
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 01/41] mmc: host: omap_hsmmc: Support pbias and vmmc_aux to switch to 1.8v
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 00/41] omap_hsmmc: Add ADMA support and UHS/HS200/DDR support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 02/41] mmc: host: omap_hsmmc: Separate setting voltage capabilities from bus power
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL] omap fixes for v4.12-rc cycle
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 04/41] mmc: host: omap_hsmmc: Add voltage switch support for UHS SD card
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 03/41] mmc: host: omap_hsmmc: Program HCTL based on signal_voltage set by mmc core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 08/41] mmc: host: omap_hsmmc: Remove incorrect voltage switch sequence
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 05/41] mmc: host: omap_hsmmc: Set clk rate to the max frequency
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 12/41] mmc: host: omap_hsmmc: Fix error path sequence
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 10/41] mmc: host: omap_hsmmc: Prepare *set_timing() to be used for iodelay setting
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 11/41] mmc: host: omap_hsmmc: Add new compatible string to support dra7
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 25/41] ARM: dts: dra7-evm: Add pinmux configuration for MMC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 19/41] ARM: dts: am57xx-beagle-x15-revb1: Fix supply name used for MMC1 IO lines
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 22/41] ARM: dts: Add dra7 iodelay configuration
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 16/41] mmc: omap_hsmmc: Support non-1.8V IO controllers
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 26/41] ARM: dts: am57xx-beagle-x15: Add pinmux configuration for MMC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 29/41] ARM: dts: am572x-idk: Add pinmux configuration for MMC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 06/41] mmc: host: omap_hsmmc: Add tuning support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 28/41] ARM: dts: am571x-idk: Add pinmux configuration for MMC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 13/41] mmc: host: omap_hsmmc: Add support to set IODELAY values
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 14/41] mmc: host: omap_hsmmc: Remove *use_dma* member
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 37/41] ARM: dts: am57xx-beagle-x15-common: Set MMC2 IO voltage to 3.3V
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 35/41] ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 15/41] mmc: host: omap_hsmmc: Enable ADMA2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 32/41] ARM: dts: dra71-evm: Add pinmux configuration for MMC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 17/41] ARM: dts: dra72-evm: Add vmmc_aux supply to mmc1
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 39/41] ARM: omap2plus_defconfig: Enable PINCTRL_TI_IODELAY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 38/41] ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 31/41] ARM: dts: dra72-evm-revc: Add pinmux configuration for MMC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 40/41] ARM: multi_v7_defconfig: Enable PINCTRL_TI_IODELAY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 20/41] ARM: dts: dra7-evm: Correct the vmmc-supply for mmc2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 30/41] ARM: dts: dra72-evm: Add pinmux configuration for MMC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 24/41] ARM: dts: dra74x: Create a common file with MMC/SD IOdelay data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 34/41] ARM: dts: dra7: Use new dra7-specific compatible string
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 41/41] Documentation: ARM: Document new dependencies for MMC on DRA7
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 36/41] ARM: dts: am57xx-idk: Set MMC2 IO voltage to 3.3V
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 23/41] ARM: dts: dra72x: Create a common file with MMC/SD IOdelay data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 27/41] ARM: dts: am57xx-idk: Move common MMC/SD properties to common file
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 33/41] ARM: dts: dra7: Add "max-frequency" property to MMC dt nodes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 21/41] ARM: dts: dra72-evm-common: Correct vmmc-supply for mmc2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 18/41] ARM: dts: dra72-evm-revc: Add vmmc_aux supply to mmc1
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 09/41] mmc: host: omap_hsmmc: Add software timer when timeout greater than hardware capablility
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] ARM: remove duplicate 'const' annotations'
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] power: supply: cpcap-battery: Add a battery driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] iio: adc: cpcap: Remove hung interrupt quirk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] iio: adc: cpcap: Fix die temperature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] iio: adc: cpcap: Fix default register values and battery temperature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] Few non-critical cpcap ADC fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ti-thermal-common: Delete an error message for a failed memory allocation in ti_thermal_build_data()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCHv3 0/3] ARM: OMAP2+: preparation for clk/clkctrl support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 3/3] ARM: OMAP4: hwmod_data: add opt clks for dss_hdmi and dss_venc
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 2/3] ARM: OMAP2+: timer: add support for fetching fck handle from DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 1/3] ARM: OMAP2+: hwmod: assign main clock from DT if available
  • From: Tero Kristo <t-kristo@xxxxxx>
• [GIT PULL] omap fixes for v4.12-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: Add remote-wakeup-connected for omap OHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: host: ohci-platform: Add support for omap3 and later
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] usb: host: ohci-platform: Add support for omap3 and later
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• [PATCH v3] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] ARM: OMAP2+: AM33XX/AM43XX: Add suspend-resume support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] ARM: OMAP2+: AM33XX/AM43XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 4/9] usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 3/9] usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 6/9] usb: musb: tusb6010_omap: Allocate DMA channels upfront
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 5/9] usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 8/9] ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 0/9] usb: musb: tusb6010_omap: Convert to DMAengine
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 7/9] usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 1/9] dmaengine: omap-dma: port_window support correction for both direction
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 9/9] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v4 2/9] usb: musb: Add quirk to avoid skb reserve in gadget mode
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] ARM: dts: omap4-devkit8000: fix gpmc ranges property
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: Add remote-wakeup-connected for omap OHCI
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/4] usb: host: ohci-platform: Add support for omap3 and later
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] memory: omap-gpmc: make dts snippet include semicolon
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 4/4] ARM: dts: Add remote-wakeup-connected for omap OHCI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] usb: host: ohci-platform: Add support for omap3 and later
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] usb: host: ohci-omap3: Print warning to get people to use ohci-platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] usb: host: ohci-platform: Add basic runtime PM support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/4] Make ohci-platform usable for omap3/4/5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 5/9] usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v3 5/9] usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v3 3/9] usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] memory: omap-gpmc: make dts snippet include semicolon
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCHv3 4/4] clk: ti: omap4: add clkctrl clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 0/4] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 3/4] dt-bindings: clk: add omap4 clkctrl definitions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 2/4] clk: ti: add support for clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 1/4] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• OMAP3ISP Parallel Camera Help
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v4] DTS: ARM: OMAP5: uevm: add µSD card detect
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 4/4] ARM: dts: omap4-droid4: Add bluetooth
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: add bluetooth
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: dra7: Reduce cpu thermal shutdown temperature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: dra7x-evm: Enable dual-role mode for USB1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: ohci: Allow ohci on omap5 also
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] ARM: OMAP2+: AM33XX/AM43XX: Add suspend-resume support
  • From: Dave Gerlach <d-gerlach@xxxxxx>
• Re: [PATCH 0/8] ARM: OMAP2+: AM33XX/AM43XX: Add suspend-resume support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V5 2/7] ARM: TI: Use - instead of @ for DT OPP entries
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-phycore-som: fix rv4162 compatible
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: LogicPD Torpedo: Fix camera pin mux
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dt: gta04: fix polarity of clocks for mcbsp4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: Add power hold and power controller properties to palmas
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 3/3] phy: Group vendor specific phy drivers
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] video: fbdev: omap2: omapfb: displays: panel-dsi-cm: Use time comparison kernel macro.
  • From: Karim Eshapa <karim.eshapa@xxxxxxxxx>
• [PATCH] pci: dwc: dra7xx: Depend on appropriate SoC or compile test
  • From: Peter Robinson <pbrobinson@xxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v3 03/21] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 6/9] regulator: palmas: Drop unnecessary static
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 6/9] regulator: palmas: Drop unnecessary static
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH v4] DTS: ARM: OMAP5: uevm: add µSD card detect
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 6/9] regulator: palmas: Drop unnecessary static
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Moreno Bartalucci <moreno.bartalucci@xxxxxxxxxxxx>
• Re: [PATCH v3 1/9] dmaengine: omap-dma: port_window support correction for both direction
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Moreno Bartalucci <moreno.bartalucci@xxxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 4/9] usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 5/9] usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 6/9] usb: musb: tusb6010_omap: Allocate DMA channels upfront
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 7/9] usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 9/9] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 2/9] usb: musb: Add quirk to avoid skb reserve in gadget mode
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 0/9] usb: musb: tusb6010_omap: Convert to DMAengine
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 1/9] dmaengine: omap-dma: port_window support correction for both direction
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 8/9] ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 3/9] usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v5 3/3] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] phy: Group vendor specific phy drivers
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] omapfb: Use devm_kcalloc() in vrfb_probe()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] ARM: remove duplicate 'const' annotations'
  • From: khalasa@xxxxxxx (Krzysztof Hałasa)
• Re: [PATCH] ARM: remove duplicate 'const' annotations'
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb-musb: keep VBUS on when device is disconnected
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] ARM: dts: LogicPD Torpedo: Fix camera pin mux
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: remove duplicate 'const' annotations'
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] omapfb: Use devm_kcalloc() in vrfb_probe()
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH] ARM: remove duplicate 'const' annotations'
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH] ARM: remove duplicate 'const' annotations'
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omapfb: Use devm_kcalloc() in vrfb_probe()
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] usb: musb: musb_cppi41: Update an error message
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] ARM: remove duplicate 'const' annotations'
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: remove duplicate 'const' annotations'
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] memory: omap-gpmc: Fix debug output for access width
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2] usb: musb: musb_cppi41: Update an error message
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 2/3] phy: Move ULPI phy header out of drivers to include path
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v5 2/3] phy: Move ULPI phy header out of drivers to include path
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• [PATCH v5 3/3] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• Re: [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCHv3 1/2] Input: pwm-vibra: new driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] usb: musb: musb_cppi41: Update an error message
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/10] usb: musb: tusb6010_omap: Convert to DMAengine
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 09/10] ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 01/10] dmaengine: omap-dma: port_window support correction for both direction
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 10/10] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 03/10] usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 02/10] usb: musb: Add quirk to avoid skb reserve in gadget mode
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 08/10] usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 07/10] usb: musb: tusb6010_omap: Allocate DMA channels upfront
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 01/10] dmaengine: omap-dma: port_window support correction for both direction
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 06/10] usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 09/10] ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 04/10] usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 05/10] usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 00/10] usb: musb: tusb6010_omap: Convert to DMAengine
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 27/28] ARM: OMAP2+: Don't register omapdss device for omapdrm
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 26/28] ARM: OMAP2+: Remove unused omapdrm platform device
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 26/28] ARM: OMAP2+: Remove unused omapdrm platform device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH] net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCHv3 1/2] Input: pwm-vibra: new driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCHv3 1/2] Input: pwm-vibra: new driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] memory: omap-gpmc: Fix debug output for access width
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 1/2] Input: pwm-vibra: new driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 27/28] ARM: OMAP2+: Don't register omapdss device for omapdrm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 26/28] ARM: OMAP2+: Remove unused omapdrm platform device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 27/28] ARM: OMAP2+: Don't register omapdss device for omapdrm
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 26/28] ARM: OMAP2+: Remove unused omapdrm platform device
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 00/29] Remove the omapdrm and omapdss devices from platform code
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] memory: omap-gpmc: Fix debug output for access width
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCHv3] phy: cpcap-usb: Add CPCAP PMIC USB support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v3 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv3 1/2] Input: pwm-vibra: new driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 4/4] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] memory: omap-gpmc: Fix debug output for access width
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCHv4] wlcore: add wl1285 compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCHv3] wlcore: add wl1285 compatible
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2] usb: musb: musb_cppi41: Update an error message
  • From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
• Re: [PATCHv3] wlcore: add wl1285 compatible
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCHv3] wlcore: add wl1285 compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCHv3 2/2] ARM: dts: omap4-droid4: Add vibrator
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCHv3 1/2] Input: pwm-vibra: new driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCHv3 0/2] PWM Vibrator driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] usb: musb: tusb6010_omap: Convert to DMAengine
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] RTC: Add functionality to read/write rtc scratch registers
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] RTC: Add functionality to read/write rtc scratch registers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/9] Drop unnecessary static
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 6/9] regulator: palmas: Drop unnecessary static
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 5/9] mfd: Drop unnecessary static
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [PATCH 4/4] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] Few cpcap charger fixes for v4.12-rc cycle
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] usb: musb: tusb6010_omap: Convert to DMAengine
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCHv2 1/2] Input: pwm-vibra: new driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] power: supply: cpcap-charger: Fix charger voltages based on ADC values
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] power: supply: cpcap-charger: Update charge current table and add comments
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Two non-critical cpcap charger fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 0/4] Motorola Droid 4: Add WL1285C support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] power: supply: cpcap-charger: Keep trickle charger bits disabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] power: supply: cpcap-charger: Fix enable for 3.8V charge setting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] power: supply: cpcap-charger: Fix charger name
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] power: supply: cpcap-charger: Fix charge voltage configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/4] Few cpcap charger fixes for v4.12-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCHv2 0/4] Motorola Droid 4: Add WL1285C support
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCHv2 0/4] Motorola Droid 4: Add WL1285C support
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCHv2 0/4] Motorola Droid 4: Add WL1285C support
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCHv2 1/4] wlcore: add wl1285 compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCHv2 3/4] Bluetooth: hci_ll: Add compatible values for more WL chips
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCHv2 4/4] ARM: dts: omap4-droid4: Add bluetooth
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCHv2 2/4] ARM: dts: omap4-droid4: Use wl1285 for wifi compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCHv2 0/4] Motorola Droid 4: Add WL1285C support
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: dra7: Reduce cpu thermal shutdown temperature
  • From: Ravikumar <rk@xxxxxx>
• [PATCHv2 2/2] ARM: dts: omap4-droid4: Add vibrator
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCHv2 1/2] Input: pwm-vibra: new driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCHv2 0/2] PWM Vibrator driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [RESEND v2 PATCH] v4l: omap_vout: vrfb: Convert to dmaengine
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [RESEND v2 PATCH] v4l: omap_vout: vrfb: Convert to dmaengine
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 4/4] usb: musb: tusb6010_omap: Convert to DMAengine API
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/4] usb: musb: tusb6010_omap: Convert to DMAengine
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 0/4] usb: musb: tusb6010_omap: Convert to DMAengine
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 3/4] ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/4] usb: musb: tusb6010_omap: Allocate DMA channels upfront
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/4] usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/4] usb: musb: tusb6010_omap: Convert to DMAengine
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] RTC: Add functionality to read/write rtc scratch registers
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 1/2] Input: pwm-vibra: new driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 1/2] Input: pwm-vibra: new driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: omap4-droid4: Add vibrator
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 0/2] PWM Vibrator driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH] drivers:video:fbdev:omap:lcd_mipid.c: Use time comparison kernel macros
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH] ARM: dts: omap4-droid4: Add isl29030 ALS/proximity sensor
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 1/3] ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 3/3] ti-soc-thermal: Fix a typo in a comment line
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v6 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v6 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] usb: musb: Fix trying to suspend while active for OTG configurations
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] drivers:video:fbdev:omap:lcd_mipid.c: Use time comparison kernel macros
  • From: Karim Eshapa <karim.eshapa@xxxxxxxxx>
• Re: [PATCH 1/8] arm: omap4: enable CEC pin for Pandaboard A4 and ES
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch] propagating controls in libv4l2 was Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] [4.11 regression] cpsw/netcp: refine cpts dependency
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 1/8] arm: omap4: enable CEC pin for Pandaboard A4 and ES
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] arm: omap4: enable CEC pin for Pandaboard A4 and ES
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] [4.11 regression] cpsw/netcp: refine cpts dependency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/8] arm: omap4: enable CEC pin for Pandaboard A4 and ES
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] [4.11 regression] cpsw/netcp: refine cpts dependency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/8] arm: omap4: enable CEC pin for Pandaboard A4 and ES
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] dt: gta04: fix polarity of clocks for mcbsp4
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2] gpio: omap: return error if requested debounce time is not possible
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH net-next] dt-bindings: mdio: Clarify binding document
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 3/3] ti-soc-thermal: Fix a typo in a comment line
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] misc: sram-exec: Use aligned fncpy instead of memcpy
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [patch] autogain support for bayer10 format (was Re: [patch] propagating controls in libv4l2)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH net-next] dt-bindings: mdio: Clarify binding document
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [patch] propagating controls in libv4l2 was Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [patch] propagating controls in libv4l2 was Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• [patch] propagating controls in libv4l2 was Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] omapfb: Use devm_kcalloc() in vrfb_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] gpio: omap: return error if requested debounce time is not possible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net-next] dt-bindings: mdio: Clarify binding document
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH V4 07/17] thermal: cpu_cooling: use cpufreq_policy to register cooling device
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2] cpsw: ethtool: add support for getting/setting EEE registers
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• [PATCH v2] gpio: omap: return error if requested debounce time is not possible
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv2 3/9] dt-bindings: clk: add omap4 clkctrl definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• cpsw regression in mainline with "cpsw/netcp: cpts depends on posix_timers"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCHv2 0/2] mfd: omap-usb-tll: Fixes for USB TLL mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: support autofocus / autogain in libv4l2
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mfd: menelaus: remove obsolete local_irq_disable() and local_irq_enable()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv2 0/2] mfd: omap-usb-tll: Fixes for USB TLL mode
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• support autofocus / autogain in libv4l2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• [PATCH] serial: 8250: omap: Disable DMA for console UART
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/2] clk: ti: fix building without legacy omap3
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add can_dma like interface for spi_flash_read" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v4 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: update entry for TI's CPSW driver
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/2] clk: ti: fix building without legacy omap3
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: [PATCH v3 0/7] iommu/omap: Add support for iommu-groups and 'struct iommu_device'
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• [PATCH v3 net-next] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/2] gpio: omap: compute debounce-time from actual debounce-clock rate
  • From: David Rivshin <drivshin@xxxxxxxxx>
• Re: [PATCH v2] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH V5 2/7] ARM: TI: Use - instead of @ for DT OPP entries
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [Letux-kernel] regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH V4 2/7] ARM: TI: Use - instead of @ for DT OPP entries
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 03/21] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V3] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH] clk: ti: fix linker error with !SOC_OMAP4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] ARM: dts: am335x-phycore-som: fix rv4162 compatible
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [v5,4/8] ARM: dts: n8x0: Add vendor prefix to retu node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [v5,2/8] mfd: retu: Drop -mfd suffix from I2C device ID name
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/2] clk: ti: fix building without legacy omap3
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/2] clk: ti: divider: try to fix ti_clk_register_divider
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCHv3] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCHv3] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3] Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH V3] PM / OPP: Use - instead of @ for DT entries
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 1/2] omap devicetree changes for v4.12, part 2
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 2/2] omap defconfig changes for v4.12
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [Query] Enabling parent device clock from resume_noirq
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] MAINTAINERS: update entry for TI's CPSW driver
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] usb: musb: Fix trying to suspend while active for OTG configurations
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] mfd: menelaus: remove obsolete local_irq_disable() and local_irq_enable()
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxx>
• [PATCH V3 07/17] thermal: cpu_cooling: use cpufreq_policy to register cooling device
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [Query] Enabling parent device clock from resume_noirq
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Applied "regulator: tps65023: Fix inverted core enable logic." to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] cpsw: ethtool: add support for getting/setting EEE registers
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: Re: [PATCH v2] cpsw: ethtool: add support for getting/setting EEE registers
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: Stop disabling SRAM and GPMC
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: et8ek8 camera on Nokia N900: trying to understand what is going on with modes
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 2/2] mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: 8250: Possible race between console message vs DMA?
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v6 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: 8250: Possible race between console message vs DMA?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Ravikumar <rk@xxxxxx>
• [Query] Enabling parent device clock from resume_noirq
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] RTC: Add functionality to read/write rtc scratch registers
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH V3] PM / OPP: Use - instead of @ for DT entries
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] clk: Add functions to save and restore clock/dpll context en-masse
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v6 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v6 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v5 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: Microphone gain on N900
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v5 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: add bluetooth
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] regulator: tps65023: Fix inverted core enable logic.
  • From: Richard Cochran <rcochran@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: Add power hold and power controller properties to palmas
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH V2 07/17] thermal: cpu_cooling: use cpufreq_policy to register cooling device
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v7 0/3] usb: musb: da8xx: Add DMA support
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [GIT PULL] omap deferred probe regression fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap deferred probe regression fix
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: add bluetooth
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: add bluetooth
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] ARM: dts: omap4-droid4: add bluetooth
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/2] mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/2] mfd: omap-usb-tll: Fixes for USB TLL mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Adam Ford <aford173@xxxxxxxxx>
• regression: drm/omapdrm: Move commit_modeset_enables() before commit_planes()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v5 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v5 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v4 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: Add power hold and power controller properties to palmas
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 03/21] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] fbdev: omapfb: delete check_required_callbacks()
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v4 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v4 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v3 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v3 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v3 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH v3 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v3 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v3 03/21] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• OMAP DRM generating errors on 4.11-RC6
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2] PM / OPP: Use - instead of @ for DT entries
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 03/22] ARM: dts: omap: Add generic compatible string for I2C EEPROM
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapdrm regressions on n900
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 2/2] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 1/2] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: omapdrm regressions on n900
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] thermal: core: Allow orderly_poweroff to be called only once
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Allow orderly_poweroff to be called only once
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH] ARM: dts: dra7: Add power hold and power controller properties to palmas
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• et8ek8 camera on Nokia N900: trying to understand what is going on with modes
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] mfd: menelaus: remove obsolete local_irq_disable() and local_irq_enable()
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: omapdrm regressions on n900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v5 2/8] mfd: retu: Drop -mfd suffix from I2C device ID name
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v5 4/8] ARM: dts: n8x0: Add vendor prefix to retu node
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v5 0/8] mfd: Add OF device table to I2C drivers that are missing it
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>