Hello Rob,
2017-06-09 16:03 GMT+02:00 Rob Herring <robh@xxxxxxxxxx>:
> On Wed, Jun 07, 2017 at 12:32:39PM +0200, Enric Balletbo i Serra wrote:
>> This patch adds a new binding documentation for the TPS65217 MFD and
>> updates the documentation for all the sub-devices in accordance to get
>> each individual sub-driver functioning correctly.
>
> Explain why breaking compatibility is okay.
>
We had some discussion in patch 4 that make me rethink a bit all this,
please let me send a new version and continue the discussion there
(now I'm not sure if I'll break the compatibility or not)
But let me ask a question. The TPS65217 MFD has different sub-nodes
(charger, backlight, pwrbutton, regulators) in DT, I suspect the
answer is no, but is it ok that some of them were not described in the
DT because there is nothing to configure?
i.e: Have this because the resources of charger and pwrbutton are
static so can be hard-coded in the driver
&tps {
compatible = "ti,tps65217";
interrupt-controller;
#interrupt-cells = <1>;
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
...
};
};
instead of :
&tps {
compatible = "ti,tps65217";
interrupt-controller;
#interrupt-cells = <1>;
charger {
compatible = "ti,tps65217-charger";
interrupts = <0>, <1>;
interrupt-names = "USB", "AC";
};
pwrbutton {
compatible = "ti,tps65217-pwrbutton";
interrupts = <2>;
};
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
...
};
};
Best regards,
Enric
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
>> ---
>> .../bindings/input/tps65218-pwrbutton.txt | 2 +-
>> .../bindings/leds/backlight/tps65217-backlight.txt | 24 ++---
>> Documentation/devicetree/bindings/mfd/tps65217.txt | 100 +++++++++++++++++++++
>> .../devicetree/bindings/regulator/tps65217.txt | 8 +-
>> 4 files changed, 119 insertions(+), 15 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/mfd/tps65217.txt
>>
>> diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
>> index 8682ab6..603a3f0 100644
>> --- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
>> +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
>> @@ -1,7 +1,7 @@
>> Texas Instruments TPS65217 and TPS65218 power button
>>
>> This module is part of the TPS65217/TPS65218. For more details about the whole
>> -TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt.
>> +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt.
>>
>> This driver provides a simple power button event via an Interrupt.
>>
>> diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
>> index 5fb9279..a1bc465 100644
>> --- a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
>> +++ b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
>> @@ -1,11 +1,13 @@
>> -TPS65217 family of regulators
>> +Texas Instruments TPS65217 backlight regulator
>> +
>> +This module is part of the TPS65217. For more details about the whole
>> +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt.
>>
>> The TPS65217 chip contains a boost converter and current sinks which can be
>> used to drive LEDs for use as backlights.
>>
>> Required properties:
>> -- compatible: "ti,tps65217"
>> -- reg: I2C slave address
>> +- compatible: "ti,tps65217-bl"
>> - backlight: node for specifying WLED1 and WLED2 lines in TPS65217
>> - isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level)
>> - fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000
>> @@ -15,13 +17,13 @@ Each regulator is defined using the standard binding for regulators.
>>
>> Example:
>>
>> - tps: tps@24 {
>> - reg = <0x24>;
>> - compatible = "ti,tps65217";
>> - backlight {
>> - isel = <1>; /* 1 - ISET1, 2 ISET2 */
>> - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
>> - default-brightness = <50>;
>> - };
>> +&tps {
>> + backlight {
>> + compatible = "ti,tps65217-bl";
>> + status = "okay";
>> + isel = <1>; /* 1 - ISET1, 2 ISET2 */
>> + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
>> + default-brightness = <50>;
>> };
>> +};
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/tps65217.txt b/Documentation/devicetree/bindings/mfd/tps65217.txt
>> new file mode 100644
>> index 0000000..40c84ba
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/tps65217.txt
>> @@ -0,0 +1,100 @@
>> +Texas Instruments TPS65217 Single-Chip PMIC for Battery-Powered Systems
>> +
>> +Required properties:
>> +- compatible: "ti,tps65217"
>> +- reg: I2C slave address.
>> +- interrupt-controller: Marks the device node as an interrupt controller.
>> +- #interrupt-cells: The number of cells to describe an IRQ, this should be 1.
>> +- backlight: Child node that specify the backlight regulator sub-device. See:
>> + Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
>> +- charger: Child node that specify the charger sub-device. See:
>> + Documentation/devicetree/bindings/power/supply/tps65217_charger.txt
>> +- pwrbutton: Child node that specify the power button sub-device. See:
>> + Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
>> +- regulators: List of child nodes that specify the regulator initialization
>> + data. See:
>> + Documentation/devicetree/bindings/regulator/tps65217.txt.
>> +
>> +Optional properties:
>> +- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle.
>> +
>> +Example:
>> +
>> + tps: tps@24 {
>> + compatible = "ti,tps65217";
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> +
>> + ti,pmic-shutdown-controller;
>> +
>> + backlight {
>> + compatible = "ti,tps65217-bl";
>> + status = "disabled";
>> + };
>> +
>> + charger {
>> + compatible = "ti,tps65217-charger";
>> + status = "disabled";
>> + };
>> +
>> + pwrbutton {
>> + compatible = "ti,tps65217-pwrbutton";
>> + status = "disabled";
>> + };
>> +
>> + regulators {
>> + compatible = "ti,tps65217-pmic";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + dcdc1_reg: dcdc1 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + dcdc2_reg: dcdc2 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + dcdc3_reg: dcc3 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + ldo1_reg: ldo1 {
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + ldo2_reg: ldo2 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + ldo3_reg: ldo3 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + ldo4_reg: ldo4 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> + };
>> + };
>> +
>> diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
>> index 4f05d20..2d9b519 100644
>> --- a/Documentation/devicetree/bindings/regulator/tps65217.txt
>> +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
>> @@ -1,8 +1,10 @@
>> -TPS65217 family of regulators
>> +Texas Instruments TPS65217 family of regulators
>> +
>> +This module is part of the TPS65217. For more details about the whole
>> +TPS65217 chip see Documentation/devicetree/bindings/mfd/tps65217.txt.
>>
>> Required properties:
>> -- compatible: "ti,tps65217"
>> -- reg: I2C slave address
>> +- compatible: "ti,tps65217-pmic"
>> - regulators: list of regulators provided by this controller, must be named
>> after their hardware counterparts: dcdc[1-3] and ldo[1-4]
>> - regulators: This is the list of child nodes that specify the regulator
>
> regulators twice? Fix that while you're here.
>
Sure, I can add this change as well.
>> --
>> 2.9.3
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
