Hello Michal,
What kernel version are you using?
It shouldn't be necessary anymore to resolve regulators dependencies
during regulator_register(), now that logic to lookup the parent
supply has been moved to regulator_get() instead.
On Tue, Jun 13, 2017 at 10:22 PM, Michał Mirosław
<mirq-linux@xxxxxxxxxxxx> wrote:
> On Tue, Jun 13, 2017 at 06:46:28PM +0100, Mark Brown wrote:
>> On Tue, Jun 13, 2017 at 04:41:58PM +0200, Michał Mirosław wrote:
>> > This allows for (acyclic) references from tps6591x supplies to
>> > its outputs.
>> This is clearly not something that should be open coded in individual
>> drivers, aside from the code duplication it is obviously possible to
>> have two different chips supplying each other which this wouldn't help
>> at all. Is this happening for you with current kernels, we have a few
>> mechanisms for deferring bindings of supplies which should help here.
>
> What mechanisms would that be? What I observed is that whenever
The specific commit that adds the mechanism Mark is referring to is:
commit 6261b06de565baafa590e58a531a1a5522cea0b6
Author: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
Date: Tue Mar 24 18:56:05 2015 -0700
regulator: Defer lookup of supply to regulator_get
Instead of resolving regulator supplies during registration move this to
the time of a consumer retrieving a handle. The benefit is that it's
possible for one driver to register regulators with internal
dependencies out of order.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
> a regulator's supply is not available but described in device-tree,
What do you mean by not available? At some point it the parent supply
should be registered with the regulator core and prevent the client
device to defer its probe when calling regulator_get().
Now, if you don't have a client device that calls regulator_get() to
resolve the parent supply but still need the parent supply to be
enabled, this commit does in the core what you attempt to do in your
driver:
commit 5e3ca2b349b1e2c80b060b51bbf2af37448fad85
Author: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Date: Wed Mar 23 20:59:34 2016 -0300
regulator: Try to resolve regulators supplies on registration
Commit 6261b06de565 ("regulator: Defer lookup of supply to regulator_get")
moved the regulator supplies lookup logic from the regulators registration
to the regulators get time.
Unfortunately, that changed the behavior of the regulator core since now a
parent supply with a child regulator marked as always-on, won't be enabled
unless a client driver attempts to get the child regulator during boot.
This patch tries to resolve the parent supply for the already registered
regulators each time that a new regulator is registered. So the regulators
that have child regulators marked as always on will be enabled regardless
if a driver gets the child regulator or not.
That was the behavior before the mentioned commit, since parent supplies
were looked up at regulator registration time instead of during child get.
Since regulator_resolve_supply() checks for rdev->supply, most of the times
it will be a no-op. Errors aren't checked to keep the possible out of order
dependencies which was the motivation for the mentioned commit.
Also, the supply being available will be enforced on regulator get anyways
in case the resolve fails on regulators registration.
Fixes: 6261b06de565 ("regulator: Defer lookup of supply to regulator_get")
Suggested-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 4.1+
> the whole device's registration is deferred.
>
> The device-tree I'm working on contains:
>
> pmic: tps65911@2d {
> compatible = "ti,tps65911";
> reg = <0x2d>;
> ...
> vcc3-supply = <&vio_reg>; // ldo6, ldo7, ldo8
> ...
> regulators {
> vio_reg: vio {
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> regulator-always-on;
> };
> ...
> }
> }
I don't see anything wrong with this DTS, it should work....
I did something similar for the max77802 PMIC in
arch/arm/boot/dts/exynos5800-peach-pi.dts, some regulators have as
input supplies regulators from the same PMIC and may not be
necessarily registered in the order to resolve parent supplies on
child registration.
>
> Best Regards,
> Michał Mirosław
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
