Re: [PATCH 1/3] mfd: lp87565: Add lp87565 PMIC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 19 May 2017, Keerthy wrote:

> The LP87565 chip is a power management IC for Portable Navigation Systems
> and Tablet Computing devices. It contains the following components:
> 
>         - Configurable Bucks(Single and multi-phase).
>         - Configurable General Purpose Output Signals (GPO).
> 
> The LP87565-Q1 variant device uses two 2-phase outputs configuration,
> Buck0 is master for Buck0/1 output and Buck2 is master for Buck2/3
> output.
> 
> Signed-off-by: Keerthy <j-keerthy@xxxxxx>
> ---
>  Documentation/devicetree/bindings/mfd/lp87565.txt |  44 ++++
>  drivers/mfd/Kconfig                               |  14 ++
>  drivers/mfd/Makefile                              |   1 +
>  drivers/mfd/lp87565.c                             | 103 ++++++++
>  include/linux/mfd/lp87565.h                       | 275 ++++++++++++++++++++++
>  5 files changed, 437 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/lp87565.txt
>  create mode 100644 drivers/mfd/lp87565.c
>  create mode 100644 include/linux/mfd/lp87565.h
> 
> diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt
> new file mode 100644
> index 0000000..38a00a1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/lp87565.txt
> @@ -0,0 +1,44 @@
> +TI LP873565 PMIC MFD driver
> +
> +Required properties:
> +  - compatible:	"ti,lp87565", "ti,lp87565-q1"
> +  - reg:		I2C slave address.
> +  - gpio-controller:	Marks the device node as a GPIO Controller.
> +  - #gpio-cells:	Should be two.  The first cell is the pin number and
> +			the second cell is used to specify flags.
> +			See ../gpio/gpio.txt for more information.
> +  - xxx-in-supply:	Phandle to parent supply node of each regulator
> +			populated under regulators node. xxx should match
> +			the supply_name populated in driver.
> +  - regulators:	List of child nodes that specify the regulator
> +			initialization data.
> +Example:
> +
> +lp87565: lp87565@60 {
> +	compatible = "ti,lp87565-q1";
> +	reg = <0x60>;
> +	gpio-controller;
> +	#gpio-cells = <2>;
> +
> +	buck10-in-supply =<&vsys_3v3>;
> +	buck23-in-supply =<&vsys_3v3>;

White space errors.

'\n' here.

> +	regulators: regulators {
> +		buck10_reg: buck10 {
> +			/*VDD_MPU*/

Whitespace errors.

> +			regulator-name = "buck10";
> +			regulator-min-microvolt = <850000>;
> +			regulator-max-microvolt = <1250000>;
> +			regulator-always-on;
> +			regulator-boot-on;
> +		};
> +
> +		buck23_reg: buck23 {
> +			/* VDD_GPU*/

Whitespace errors.

> +			regulator-name = "buck23";
> +			regulator-min-microvolt = <850000>;
> +			regulator-max-microvolt = <1250000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +	};
> +};
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3eb5c93..5e884f3 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1325,6 +1325,20 @@ config MFD_TI_LP873X
>  	  This driver can also be built as a module. If so, the module
>  	  will be called lp873x.
>  
> +config MFD_TI_LP87565
> +	tristate "TI LP87565 Power Management IC"
> +	depends on I2C
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	help
> +	  If you say yes here then you get support for the LP87565 series of
> +	  Power Management Integrated Circuits (PMIC).
> +	  These include voltage regulators, thermal protection, configurable
> +	  General Purpose Outputs (GPO) that are used in portable devices.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called lp87565.
> +
>  config MFD_TPS65218
>  	tristate "TI TPS65218 Power Management chips"
>  	depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index c16bf1e..7edbe1b 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
>  obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
>  
>  obj-$(CONFIG_MFD_TI_LP873X)	+= lp873x.o
> +obj-$(CONFIG_MFD_TI_LP87565)	+= lp87565.o
>  
>  obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
>  obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
> diff --git a/drivers/mfd/lp87565.c b/drivers/mfd/lp87565.c
> new file mode 100644
> index 0000000..dff882f
> --- /dev/null
> +++ b/drivers/mfd/lp87565.c
> @@ -0,0 +1,103 @@
> +/*
> + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * Author: Keerthy <j-keerthy@xxxxxx>

We usually ask for full "first last" names.

> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.

Can you use the short licence?

> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/lp87565.h>
> +
> +static const struct regmap_config lp87565_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = LP87565_REG_MAX,
> +};
> +
> +static const struct mfd_cell lp87565_cells[] = {
> +	{ .name = "lp87565-q1-regulator", },
> +	{ .name = "lp87565-q1-gpio", },
> +};
> +
> +static const struct of_device_id of_lp87565_match_table[] = {
> +	{
> +		.compatible = "ti,lp87565-q1",
> +		.data = (void *)LP87565_DEVICE_TYPE_LP87565_Q1,
> +	},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, of_lp87565_match_table);
> +
> +static int lp87565_probe(struct i2c_client *client,
> +			 const struct i2c_device_id *ids)
> +{
> +	struct lp87565 *lp87565;
> +	const struct of_device_id *of_id;
> +	int ret;
> +	unsigned int otpid;
> +
> +	lp87565 = devm_kzalloc(&client->dev, sizeof(*lp87565), GFP_KERNEL);
> +	if (!lp87565)
> +		return -ENOMEM;
> +
> +	lp87565->dev = &client->dev;
> +
> +	lp87565->regmap = devm_regmap_init_i2c(client, &lp87565_regmap_config);
> +	if (IS_ERR(lp87565->regmap)) {
> +		ret = PTR_ERR(lp87565->regmap);
> +		dev_err(lp87565->dev,
> +			"Failed to initialize register map: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = regmap_read(lp87565->regmap, LP87565_REG_OTP_REV, &otpid);
> +	if (ret) {
> +		dev_err(lp87565->dev, "Failed to read OTP ID\n");
> +		return ret;
> +	}
> +
> +	lp87565->rev = otpid & LP87565_OTP_REV_OTP_ID;

'\n' here.

> +	of_id = of_match_device(of_lp87565_match_table, &client->dev);
> +	if (of_id)
> +		lp87565->dev_type = (enum lp87565_device_type)of_id->data;
> +
> +	i2c_set_clientdata(client, lp87565);
> +
> +	ret = mfd_add_devices(lp87565->dev, PLATFORM_DEVID_AUTO, lp87565_cells,
> +			      ARRAY_SIZE(lp87565_cells), NULL, 0, NULL);
> +
> +	return ret;
> +}
> +
> +static const struct i2c_device_id lp87565_id_table[] = {
> +	{ "lp87565-q1", 0 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(i2c, lp87565_id_table);

Is this an OF only driver, or not?

> +static struct i2c_driver lp87565_driver = {
> +	.driver	= {
> +		.name	= "lp87565",
> +		.of_match_table = of_lp87565_match_table,
> +	},
> +	.probe		= lp87565_probe,
> +	.id_table	= lp87565_id_table,
> +};
> +module_i2c_driver(lp87565_driver);
> +
> +MODULE_AUTHOR("J Keerthy <j-keerthy@xxxxxx>");
> +MODULE_DESCRIPTION("lp87565 chip family Multi-Function Device driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/lp87565.h b/include/linux/mfd/lp87565.h
> new file mode 100644
> index 0000000..6112365
> --- /dev/null
> +++ b/include/linux/mfd/lp87565.h
> @@ -0,0 +1,275 @@
> +/*
> + * Functions to access LP87565 power management chip.
> + *
> + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/

Please update the Copyright.

> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LINUX_MFD_LP87565_H
> +#define __LINUX_MFD_LP87565_H
> +
> +#include <linux/i2c.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +
> +enum lp87565_device_type {
> +	LP87565_DEVICE_TYPE_UNKNOWN	= 0,
> +	LP87565_DEVICE_TYPE_LP87565_Q1,
> +};
> +
> +/* All register addresses */
> +#define LP87565_REG_DEV_REV		0X00
> +#define LP87565_REG_OTP_REV		0X01
> +#define LP87565_REG_BUCK0_CTRL_1		0X02
> +#define LP87565_REG_BUCK0_CTRL_2		0X03
> +
> +#define LP87565_REG_BUCK1_CTRL_1		0X04
> +#define LP87565_REG_BUCK1_CTRL_2		0X05
> +
> +#define LP87565_REG_BUCK2_CTRL_1		0X06
> +#define LP87565_REG_BUCK2_CTRL_2		0X07
> +
> +#define LP87565_REG_BUCK3_CTRL_1		0X08
> +#define LP87565_REG_BUCK3_CTRL_2		0X09
> +
> +#define LP87565_REG_BUCK0_VOUT			0X0A
> +#define LP87565_REG_BUCK0_FLOOR_VOUT		0X0B
> +
> +#define LP87565_REG_BUCK1_VOUT			0X0C
> +#define LP87565_REG_BUCK1_FLOOR_VOUT		0X0D
> +
> +#define LP87565_REG_BUCK2_VOUT			0X0E
> +#define LP87565_REG_BUCK2_FLOOR_VOUT		0X0F
> +
> +#define LP87565_REG_BUCK3_VOUT			0X10
> +#define LP87565_REG_BUCK3_FLOOR_VOUT		0X11
> +
> +#define LP87565_REG_BUCK0_DELAY			0X12
> +#define LP87565_REG_BUCK1_DELAY			0X13
> +
> +#define LP87565_REG_BUCK2_DELAY			0X14
> +#define LP87565_REG_BUCK3_DELAY			0X15
> +
> +#define LP87565_REG_GPO2_DELAY			0X16
> +#define LP87565_REG_GPO3_DELAY			0X17
> +#define LP87565_REG_RESET			0X18
> +#define LP87565_REG_CONFIG			0X19
> +
> +#define LP87565_REG_INT_TOP_1			0X1A
> +#define LP87565_REG_INT_TOP_2			0X1B
> +
> +#define LP87565_REG_INT_BUCK_0_1		0X1C
> +#define LP87565_REG_INT_BUCK_2_3		0X1D
> +#define LP87565_REG_TOP_STAT			0X1E
> +#define LP87565_REG_BUCK_0_1_STAT		0X1F
> +#define LP87565_REG_BUCK_2_3_STAT		0x20
> +
> +#define LP87565_REG_TOP_MASK_1			0x21
> +#define LP87565_REG_TOP_MASK_2			0x22
> +
> +#define LP87565_REG_BUCK_0_1_MASK		0x23
> +#define LP87565_REG_BUCK_2_3_MASK		0x24
> +#define LP87565_REG_SEL_I_LOAD			0x25
> +
> +#define LP87565_REG_I_LOAD_2			0x26
> +#define LP87565_REG_I_LOAD_1			0x27
> +
> +#define LP87565_REG_PGOOD_CTRL1			0x28
> +#define LP87565_REG_PGOOD_CTRL2			0x29
> +#define LP87565_REG_PGOOD_FLT			0x2A
> +#define LP87565_REG_PLL_CTRL			0x2B
> +#define LP87565_REG_PIN_FUNCTION		0x2C
> +#define LP87565_REG_GPIO_CONFIG			0x2D
> +#define LP87565_REG_GPIO_IN			0x2E
> +#define LP87565_REG_GPIO_OUT			0x2F
> +
> +#define LP87565_REG_MAX			LP87565_REG_GPIO_OUT
> +
> +/* Register field definitions */
> +#define LP87565_DEV_REV_DEV_ID			0xC0
> +#define LP87565_DEV_REV_ALL_LAYER		0x30
> +#define LP87565_DEV_REV_METAL_LAYER		0x0F
> +
> +#define LP87565_OTP_REV_OTP_ID			0xFF
> +
> +#define LP87565_BUCK_CTRL_1_EN			BIT(7)
> +#define LP87565_BUCK_CTRL_1_EN_PIN_CTRL		BIT(6)
> +#define LP87565_BUCK_CTRL_1_PIN_SELECT_EN	0x30
> +
> +#define LP87565_BUCK_CTRL_1_ROOF_FLOOR_EN	BIT(3)
> +#define LP87565_BUCK_CTRL_1_RDIS_EN		BIT(2)
> +#define LP87565_BUCK_CTRL_1_FPWM		BIT(1)
> +/* Bit0 is reserved for BUCK1 and BUCK3 and valid only for BUCK0 and BUCK2 */
> +#define LP87565_BUCK_CTRL_1_FPWM_MP_0_2		BIT(0)
> +
> +#define LP87565_BUCK_CTRL_2_ILIM		0x38
> +#define LP87565_BUCK_CTRL_2_SLEW_RATE		0x07
> +
> +#define LP87565_BUCK_VSET			0xFF
> +#define LP87565_BUCK_FLOOR_VSET			0xFF
> +
> +#define LP87565_BUCK_SHUTDOWN_DELAY		0xF0
> +#define LP87565_BUCK_STARTUP_DELAY		0x0F
> +
> +#define LP87565_GPIO_SHUTDOWN_DELAY		0xF0
> +#define LP87565_GPIO_STARTUP_DELAY		0x0F
> +
> +#define LP87565_RESET_SW_RESET			BIT(0)
> +
> +#define LP87565_CONFIG_DOUBLE_DELAY		BIT(7)
> +#define LP87565_CONFIG_CLKIN_PD			BIT(6)
> +#define LP87565_CONFIG_EN4_PD			BIT(5)
> +#define LP87565_CONFIG_EN3_PD			BIT(4)
> +#define LP87565_CONFIG_TDIE_WARN_LEVEL		BIT(3)
> +#define LP87565_CONFIG_EN2_PD			BIT(2)
> +#define LP87565_CONFIG_EN1_PD			BIT(1)
> +
> +#define LP87565_INT_GPIO			BIT(7)
> +#define LP87565_INT_BUCK23			BIT(6)
> +#define LP87565_INT_BUCK01			BIT(5)
> +#define LP87565_NO_SYNC_CLK			BIT(4)
> +#define LP87565_TDIE_SD				BIT(3)
> +#define LP87565_TDIE_WARN			BIT(2)
> +#define LP87565_INT_OVP				BIT(1)
> +#define LP87565_I_LOAD_READY			BIT(0)
> +
> +#define LP87565_INT_TOP2_RESET_REG		BIT(0)
> +
> +#define LP87565_BUCK1_PG_INT			BIT(6)
> +#define LP87565_BUCK1_SC_INT			BIT(5)
> +#define LP87565_BUCK1_ILIM_INT			BIT(4)
> +#define LP87565_BUCK0_PG_INT			BIT(2)
> +#define LP87565_BUCK0_SC_INT			BIT(1)
> +#define LP87565_BUCK0_ILIM_INT			BIT(0)
> +
> +#define LP87565_BUCK3_PG_INT			BIT(6)
> +#define LP87565_BUCK3_SC_INT			BIT(5)
> +#define LP87565_BUCK3_ILIM_INT			BIT(4)
> +#define LP87565_BUCK2_PG_INT			BIT(2)
> +#define LP87565_BUCK2_SC_INT			BIT(1)
> +#define LP87565_BUCK2_ILIM_INT			BIT(0)
> +
> +#define LP87565_SYNC_CLK_STAT			BIT(4)
> +#define LP87565_TDIE_SD_STAT			BIT(3)
> +#define LP87565_TDIE_WARN_STAT			BIT(2)
> +#define LP87565_OVP_STAT			BIT(1)
> +
> +#define LP87565_BUCK1_STAT			BIT(7)
> +#define LP87565_BUCK1_PG_STAT			BIT(6)
> +#define LP87565_BUCK1_ILIM_STAT			BIT(4)
> +#define LP87565_BUCK0_STAT			BIT(3)
> +#define LP87565_BUCK0_PG_STAT			BIT(2)
> +#define LP87565_BUCK0_ILIM_STAT			BIT(0)
> +
> +#define LP87565_BUCK3_STAT			BIT(7)
> +#define LP87565_BUCK3_PG_STAT			BIT(6)
> +#define LP87565_BUCK3_ILIM_STAT			BIT(4)
> +#define LP87565_BUCK2_STAT			BIT(3)
> +#define LP87565_BUCK2_PG_STAT			BIT(2)
> +#define LP87565_BUCK2_ILIM_STAT			BIT(0)
> +
> +#define LPL87565_GPIO_MASK			BIT(7)
> +#define LPL87565_SYNC_CLK_MASK			BIT(4)
> +#define LPL87565_TDIE_WARN_MASK			BIT(2)
> +#define LPL87565_I_LOAD_READY_MASK		BIT(0)
> +
> +#define LPL87565_RESET_REG_MASK			BIT(0)
> +
> +#define LPL87565_BUCK1_PG_MASK			BIT(6)
> +#define LPL87565_BUCK1_ILIM_MASK		BIT(4)
> +#define LPL87565_BUCK0_PG_MASK			BIT(2)
> +#define LPL87565_BUCK0_ILIM_MASK		BIT(0)
> +
> +#define LPL87565_BUCK3_PG_MASK			BIT(6)
> +#define LPL87565_BUCK3_ILIM_MASK		BIT(4)
> +#define LPL87565_BUCK2_PG_MASK			BIT(2)
> +#define LPL87565_BUCK2_ILIM_MASK		BIT(0)
> +
> +#define LP87565_LOAD_CURRENT_BUCK_SELECT	0x3
> +
> +#define LP87565_I_LOAD2_BUCK_LOAD_CURRENT	0x3
> +#define LP87565_I_LOAD1_BUCK_LOAD_CURRENT	0xFF
> +
> +#define LP87565_PG3_SEL				0xC0
> +#define LP87565_PG2_SEL				0x30
> +#define LP87565_PG1_SEL				0x0C
> +#define LP87565_PG0_SEL				0x03
> +
> +#define LP87565_HALF_DAY			BIT(7)
> +#define LP87565_EN_PG0_NINT			BIT(6)
> +#define LP87565_PGOOD_SET_DELAY			BIT(5)
> +#define LP87565_EN_PGFLT_STAT			BIT(4)
> +#define LP87565_PGOOD_WINDOW			BIT(2)
> +#define LP87565_PGOOD_OD			BIT(1)
> +#define LP87565_PGOOD_POL			BIT(0)
> +
> +#define LP87565_PG3_FLT				BIT(3)
> +#define LP87565_PG2_FLT				BIT(2)
> +#define LP87565_PG1_FLT				BIT(1)
> +#define LP87565_PG0_FLT				BIT(0)
> +
> +#define LP87565_PLL_MODE			0xC0
> +#define LP87565_EXT_CLK_FREQ			0x1F
> +
> +#define LP87565_EN_SPREAD_SPEC			BIT(7)
> +#define LP87565_EN_PIN_CTRL_GPIO3		BIT(6)
> +#define LP87565_EN_PIN_SELECT_GPIO3		BIT(5)
> +#define LP87565_EN_PIN_CTRL_GPIO2		BIT(4)
> +#define LP87565_EN_PIN_SELECT_GPIO2		BIT(3)
> +#define LP87565_GPIO3_SEL			BIT(2)
> +#define LP87565_GPIO2_SEL			BIT(1)
> +#define LP87565_GPIO1_SEL			BIT(0)
> +
> +#define LP87565_GOIO3_OD			BIT(6)
> +#define LP87565_GOIO2_OD			BIT(5)
> +#define LP87565_GOIO1_OD			BIT(4)
> +#define LP87565_GOIO3_DIR			BIT(2)
> +#define LP87565_GOIO2_DIR			BIT(1)
> +#define LP87565_GOIO1_DIR			BIT(0)
> +
> +#define LP87565_GOIO3_IN			BIT(2)
> +#define LP87565_GOIO2_IN			BIT(1)
> +#define LP87565_GOIO1_IN			BIT(0)
> +
> +#define LP87565_GOIO3_OUT			BIT(2)
> +#define LP87565_GOIO2_OUT			BIT(1)
> +#define LP87565_GOIO1_OUT			BIT(0)
> +
> +/* Number of step-down converters available */
> +#define LP87565_NUM_BUCK		6
> +
> +enum LP87565_regulator_id {
> +	/* BUCK's */
> +	LP87565_BUCK_0,
> +	LP87565_BUCK_1,
> +	LP87565_BUCK_2,
> +	LP87565_BUCK_3,
> +	LP87565_BUCK_10,
> +	LP87565_BUCK_23,
> +};
> +
> +/**
> + * struct LP87565 - state holder for the LP87565 driver
> + * @dev: struct device pointer for MFD device
> + * @rev: revision of the LP87565
> + * @dev_type: The device type for example lp87565-q1
> + * @lock: lock guarding the data structure
> + * @regmap: register map of the LP87565 PMIC
> + *
> + * Device data may be used to access the LP87565 chip
> + */
> +struct lp87565 {
> +	struct device *dev;
> +	u8 rev;
> +	u8 dev_type;
> +	struct regmap *regmap;
> +};
> +#endif /* __LINUX_MFD_LP87565_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux